|
Fiber Optic Telephone
Extenders- 8800 Fiber Optic Extender
American
Tech Supply carries a complete line of fiber optic telephone extenders
ranging from simple "quick talk" extenders to multi-line
(24 channel) PBX line extenders allowing you to use existing fiber
optic cable to run your voice needs over 2 fiber strands or install
fiber optic cable one time and use fiber optics for security proof
voice, data, IP, video services on one media- fiber.
The TC8800 is a 4-to-28 channel telephone and data fiber optic multiplexer
that extends multiple telephone lines and data channels to remote
sites such as other buildings in campus networks.
Our
fiber optic modems are available from several different manufacturers
including TC Comm, Opterna, Omnitron, Allied Telesyn, Opticomm,
and others. Our Fiber Optic Transmission products are ideal for
Data, Voice, Ethernet, T1/E1, T3/E3 & Audio for campus &
intra-building fiber optic networks.
Additional
Fiber Optic Extenders- Allows Voice-Data-IP-Video -extend
Voice PBX Service Via Fiber Optic Cable
|
Fiber Optic Telephone Extenders-Fiber
Optic Modems-T1/E1
Fiber Optic Modems- T3/ E3 Fiber Optic Modems- Async/Sync Fiber
Optic Modems- Fiber Optic Transceivers- Fiber Optic Multiplexers-
Ethernet Media Converters- Telephone Extenders-Fiber Optic Media
Converters
CALL
ATEK Today at (866) FIBER-21
Extend
Up to 28 Telephone Lines and/or RS-232, RS-422, TTL, Dry Contact
Closure, Dry Contact Detector
2-Wire Analog PBX and Key System Compatible
Multimode or Single Mode (850/1300/1550nm)
Built-In Power Redundancy
Optical Redundancy (Optional)
Hardened Temperature Version (Optional)
Standalone or Hot Swappable Rackmount Cards
(TC8800 Series) Prices Start at $1,680.00 ea..
Applications
The TC8800 is typically used to link or extend data and telephone
lines in campus networks. In many instances the TC8800 can replace
expensive channel banks.
Description
The
TC8800 is a 4-to-28 channel telephone and data fiber optic multiplexer
that extends multiple telephone lines and data channels to remote
sites such as other buildings in campus networks. The TC8800 Series
consists of TC8800 (FXS), TC8801 (FXO), and TC8802 (Data). Users
can mix or match telephone channels or RS-232, RS-422, TTL and Dry
Contact Interfaces in increments of four up to a maximum of 28 channels.
For example, a user could multiplex 20 telephone channels and 8
RS-232 data channels.
The
TC8800 Series converts 2-wire FXS to fiber optics on the telephone
side with ring down capability and FXO on the PBX side. Distances
up to 80km are typical over single mode fiber, 4km over multimode
fiber. Because the TC8800 digitizes the analog signals (PCM), voice
quality does not degrade over extended distances.
It
supports Telephone channels from 300Hz to 3.4Khz and asynchronous
data rates to 19.2 Kbps. Twelve LEDs are available for status monitoring
and diagnostics. A dry contact alarm is optional. Diagnostic LEDs
for each channel include Tx, Rx, Hook and Ring.
The
TC8800R PC Card version requires the TCRM191 or TCRM195 19"
Rackmount Card Cage. Each TC8800R card can be removed or installed
on the TCRM191 without powering down the system ("hot-swappable").
The TC8800S Standalone version currently supports up to 8 telephone
or data channels. An extreme temperature version (-20°C to 70°C),
TC8800T, is also available.
The
TC8800 Series works with all types and sizes of multimode or single
mode fiber optic cable at 850/1300/1550nm. Fiber optic connectors
are ST or FC. RJ-11F ports are provided on the rear side to connect
with telephones. Power redundancy is standard; optical redundancy
is optional. Power is 12Vdc; 115/230VAC and 24VDC are optional.
Call
American Tech Supply Today For Engineering Or Sales Assistance at
(866) FIBER-21
home
| cables | switches
| Contact Us our
team | locations
|
American
Owned and Operated
.jpg)
.jpg)
.jpg){kind=small}