Fiber Optic Enclosures

About Us
cable, vdsl, patch

 

Corning (compatible) Fiber Optic Enclosures- Corning (compatible) Fiber Optic Patch Panels- Wholesale Fiber Optic Enclosure Pricing- Outdoor Fiber Optic Enclosures

Fiber Optic Enclosures-Fiber Optic Patch Panels- Wall Mount Fiber Optic Patch Panels- 24 Port Fiber Optic Patch Panels-Indoor Fiber Optic Patch Panels - 48 Port Fiber Optic Patch Panels-72 Port Fiber Optic Patch Panels- 144 Port Patch Panels- Rack Mount Fiber Optic Patch Panels- Fiber Optic Frames- Fiber Optic Main Distribution Frame -Network Bays- Open Bay Frame Systems

American Tech Supply carries a complete line of fiber optic patch panels and fiber optic enclosures that are compatible with the Corning Fiber Optic Enclosure Line of products including our Corning (compatible) fiber optic patch panels, outdoor fiber optic enclosures,wallmount fiber optic panels and rackmount fiber optic patch panel fiber optic enclosures which are designed for direct termination of up to 144 fibers. We carry a full line of fiber optic enclosures and fiber optic patch panels from Multilink,ICC, Signamax, Century, Emerson-Fiberconn, Fiber Connections, Corning, Telect, Superior , ADC and others.The RAC series patch panel accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. We also offer a large variety of fiber optic connector adapters that are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management. Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management.

Made in USA Enclosures

Century Wallmount Fiber Enclosures- 6-144 Fibers

 

Selection of NEMA Rated Enclosures

 

  In Stock-ATSWAC-1X$ 68.88 Economy Wall Mount & Rack Mount Enclosures

 

American Tech Supply Lowest Price Guarantee-We Will Meet Or Beat Any Price in the U.S.A.

Need Fiber Optic Adapters-Feed Through Adapters?

See our partial inventory of fiber optic enclosures below- we have listed Corning, Corning compatible, and Signamax fiber optic enclosures. We also specialize in custom fiber optic enclosures- Call or Click Here us or more information at (866) 342-3721 for all you fiber optic patch panel and fiber optic enclosure needs. Remember- we meet or beat all USA Based Pricing!

Due to massive fluctuations in the cost of oil, copper and raw goods- please call first to get latest pricing on all Fiber Enclosures

 

Draka Fiber Enclosures

 

Corning Fiber Enclosures

 

Economical Fiber Optic Enclosures

Sliding Fiber Optic Shelf PRICING Corning (Compatible-Emerson) Fiber Optic Enclosures
Complete Selection of FTTX- Fiber To The Home Enclosures-Optical Enclosures and Fiber Optic Dome Enclosures- More Info

 

NEW! Century Fiber Optic EnclosuresCentury OSP -Outside Plant Enclosures

 

NEW! Signamax Fiber Optic Enclosures
 
Sliding Rack Mount Low Profile- Fiber Optic Enclosure

SL2M-B

2-Module (12 to 24 Fiber) Rack Mount Enclosure, Black

 
 

FST-2M-B

12 Fiber Splice Tray for SL2M-B

 
We carry the Signamax four-rack space, 12-module fiber optic enclosure contains all of the features of the two-rack space model, but with additional capacity to manage fiber counts up to 144. Cable entry/exit feature utilizes a flexible grommet seal, which is cut at time of installation to accommodate the desired cable diameters for entry and exit points. These grommets provide a dust & debris barrier during and after installation. All Signamax connector interface modules can be utilized in the four-rack space enclosure. Optional 12- and 24-fiber splice trays are available.
AFL Telecommunications Fiber Optic Enclosures-Wall Mount Enclosures-OSP -Outside Plant Enclosures- FTTH- Fiber To THe Home Enclosures- Fiber To The Curb Enclosures and Equipment - Fiber Test Equipment
AFL Fiber Optic Enclosures
 
 

Corning Telecommunications Fiber Optic Enclosures-Wall Mount Enclosures-OSP -Outside Plant Enclosures- FTTH- Fiber To THe Home Enclosures- Fiber To The Curb Enclosures and Equipment - Fiber Test Equipment
 
 
FOR PRICING- SEE BELOW BLUE SHADED PRICE LIST Corning (Compatible-Emerson) Fiber Optic Enclosures
 

New Draka- Fiber Optic Cplice Enclosures Product Specifications
Applications Fiber Optic Enclosure -Universal Indoor Rack Mount (Panel Access) Fiber Patching and/or Splicing
Compatible with all Singlemode & Multimode Fibers
Configurations Patch & Splice, Patch only, Splice only / 19" & 23" racks
Max Capacity 72, 144, 216, 288 Connections
24 Splices per Tray
6 Connections per Panel
Connector Types LC, SC, FC, ST connectors
Ultra & Angled polish available)
Options Preconnectorized Stub or Pigtails, Tailored Length(s)
Preconfigured Adapters, Pigtails, and/or Splice Trays
Ordering Information
  Series Capacity
ezPATCH-Splice | Rack Mount Fiber Optic Enclosure PSRM 72, 144, 216, 288 Connections
ezPATCH | Rack Mount Fiber Optic Enclosure PORM 72, 144, 216, 288 Connections
ezSPLICE | Rack Mount SORM 72, 144, 216, 288 Connections 
Fiber Optic Splice Tray- ezPATCH-SPLICE | Sliding Rack
Easy fiber patch & splice connectivity hardware with sliding access for rack mounting in 19" or 23" racks.  Low-profile stackable units provide 24 connections per 1U of rack space.  Simplify your real world with factory performance stubbed patch panels. 
Product Specifications
Applications Universal Indoor Rack Mount (Sliding Access) Fiber Patching and/or Splicing
Configurations Patch & Splice / Patch Only / Splice Only
19" or 23" racks
Max Capacity 24 Connections per 1U (1.75")
12 Splices per tray
Connector Types LC, SC, FC, ST
(Ultra & Angled polish available)
Options Preconnectorized Stub or Pigtails, Tailored Length(s)
Preconfigured Adapters, Pigtails and/or Splice Trays
Mounting Hardware for 19" or 23" Frames
Ordering Information
  Series Capacity
ezPATCH-SPLICE | Sliding Rack PSSR 24 Connections per Unit (1U)

Draka Fiber Optic Wall Enclosures

ezPATCH-SPLICE | Wall Mount Fiber Optic Enclosure
Easy fiber patch & splice connectivity hardware with lockable door access for wall mounting in telecommunications closets, building entrance and other indoor spaces.  Three sizes are available for 12, 36, or 72 connections.  Simplify your real world with factory performance ezPATCH  stubbed hardware
.

Product Specifications
Applications Universal Indoor Wall Mount (lockable door access) Fiber Patching and/or Splicing
Configurations Patch & Splice / Patch only / Splice only
Max Capacity 12, 36 or 72 Connection sizes
12 Splices per tray
Connector Types LC, SC, FC, ST Connectors
(Ultra & Angled polish available)
Options Preconnectorized Stub or Pigtails, Tailored Length(s)
Preconfigured Adapters, Pigtails and/or Splice Trays
ezSPLICE | Building Entrance version up to 144 or 288 Splices
Ordering Information
  Series Capacity
ezPATCH-SPLICE | Wall Mount PSWM 12, 36 or 72 Connections
ezSPLICE | Building Entrance SOWM 144 or 288 Splices
(24 Fibers per tray)

 

We Supply FTTH Projects-SBC-Verizon Fiber To The Curb/Home Fiber Optic-OSP-Fiber Test Equipment

AFL-LL-400b Optical Splicing Enclosures

Standard Wall Mount and Rack Mount Fiber Optic Enclosure Pricing

ATS Part Number Type Fiber Optic Enclosure Fiber Optic Enclosures-Fiber Optic Patch Panels Suggested Price-Due TO Metal Price Increases- Please Call
    Description Price
ATSRAC-1X Rack Mount 1U, 3-Panel, w/Sliding Tray $141.67
ATSRAC-1X-EXT Rack Mount 1U, 3-Panel, w/Sliding Tray, EXTENDED TO 15" $159.53
ATSRAC-2X Rack Mount 2U, 6-Panel $170.18
ATSRAC-2X-EXT Rack Mount Fiber Optic Enclosure 2U, 6-Panel, EXTENDED TO 15" $204.85
ATSRAC-4X Rack Mount Fiber Optic Enclosure 4U, 12-Panel $251.72
ATSRAC-4X-EXT Rack Mount Fiber Optic Enclosure 4U, 12-Panel, EXTENDED TO 15 " $298.19
ATSRAC-8X-EXT Rack Mount Fiber Optic Enclosure 8U, 24-Panel, EXTENDED TO 15 " $576.39
ATSRAC-12X Rack Mount 2U, 2-Panel $158.83
ATSRAC-12X-EXT Rack Mount 2U, 2-Panel, EXTENDED TO 15" $185.64
ATSRAC-24X Rack Mount 2U, 4-Panel $164.31
ATSRAC-24X-EXT Rack Mount 2U, 4-Panel, EXTENDED TO 15" $194.91
DMAX-1X-EN Sliding Rack Mount 1U, Black, 3 Panel, No Adapters $235.63
DMAX-1X-EN-X-LOUM-12 Sliding Rack Mount 1U, Black, 12-Port, Duplex, LC, Aqua $339.94
DMAX-1X-EN-X-LOUM-16 Sliding Rack Mount 1U, Black, 16-Port, Duplex, LC, Aqua $371.55
DMAX-1X-EN-X-LOUM-32 Sliding Rack Mount 1U, Black, 32-Port, Duplex, LC, Aqua $495.40
DMAX-2X-EN-C Sliding Rack Mount 2U, Black, 3 Panel, No Adapters, w/Wire Management $322.99
DMAX-2X-EN-X-LOUM-12-C Sliding Rack Mount 2U, Black, 12-Port, Duplex, LC, Aqua w/Wire Management $415.23
DMAX-2X-EN-X-LOUM-16-C Sliding Rack Mount 2U, Black, 16-Port, Duplex, LC, Aqua w/Wire Management $446.84
DMAX-2X-EN-X-LOUM-32-C Sliding Rack Mount 2U, Black, 32-Port, Duplex, LC, Aqua w/Wire Management $570.69
DMAX-4X-EN Rack Mount 4U, Black, 12 Panel, No Adapters $35.00
ATSRAC-36X Rack Mount Fiber Optic Enclosure 2U, 6-Panel, w/Sliding Tray $220.35
ATSDMAX-1X-EN Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 3 Panel, No Adapters $235.63
ATSDMAX-1X-EN-X-LOUM-12 Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 12-Port, Duplex, LC, Aqua $339.94
ATSDMAX-1X-EN-X-LOUM-16 Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 16-Port, Duplex, LC, Aqua $371.55
ATSDMAX-1X-EN-X-LOUM-32 Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 32-Port, Duplex, LC, Aqua $495.40
ATSDMAX-2X-EN-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 3 Panel, No Adapters, w/Wire Management $322.99
ATSDMAX-2X-EN-X-LOUM-12-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 12-Port, Duplex, LC, Aqua w/Wire Management $415.23
ATSDMAX-2X-EN-X-LOUM-16-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 16-Port, Duplex, LC, Aqua w/Wire Management $446.84
ATSDMAX-2X-EN-X-LOUM-32-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 32-Port, Duplex, LC, Aqua w/Wire Management $570.69
ATSDMAX-4X-EN Rack Mount Fiber Optic Enclosure 4U, Black, 12 Panel, No Adapters $35.00
ATSWAC-1X Wall Mount Fiber Optic Enclosure 1 Panel $55.39
ATSWAC-2X Wall Mount Fiber Optic Enclosure 2 Panel $59.64
ATSWAC-2X-EXT Wall Mount Fiber Optic Enclosure 2 Panel, Larger storage area $113.73
ATSWAC-4X Wall Mount Fiber Optic Enclosure 4 Panel $85.14
ATSWAC-8X Wall Mount Fiber Optic Enclosure 8 Panel $183.22
ATS300-360-028 Wire Management 1U, Black, 4-ring, Left and Right Pass Thru $87.27
ATS300-360-029 Wire Management 2U, Black, 4-ring, Left and Right Pass Thru $95.61
ATS300-360-030 Wire Management 2U, Black, 4-ring, Left and Right Pass Thru w/Rear Tray $101.36

Corning (compatible) Wall Mount Enclosures

Corning (compatible) Wall Mount Fiber Optic Enclosures Fiber-Conn's wall-mount patch enclosures are designed for direct termination of up to 96 fibers. The WAC series wall mount fiber optic enclosures accommodate up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel with corrosion-resistant black powder finish coat housing provides excellent protection for the inside fibers. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

Features and Benefits

  • Three sizes available with up to 8 adapter panel capacity 16-gauge steel with corrosion-resistant black powder finish coat Swing-down door with cable strand for more work space Grommets at the top and bottom Strain-relief hardware and routing guides help maintain minimum bend radius. Available unloaded or fully loaded with capability of mechanical termination
  • Zip ties and installation screws included

Part No. WAC-1X-Price $ Price $ 55.39each
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment. *The WAC-1X does not support splice trays.
Lead time: In Stock, Immediate Shipment

Part No. WAC-2X-Price $59.99each
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-4X- Price $85.14 each
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-8X- Price $183.22
Dimensions: Width = 17'', 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-12X
Dimensions: Width=17.75", Depth = 5.87'', Height = 16.75"
Features: Wall-mount enclosure accepts 12 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock.
Lead time: In Stock, Immediate Shipment

Rack Mount Enclosures

Fiber Optic Patch Panels-Rack Mount (RAC Series)

Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module preassemblies are available for easy fiber installation and management.

Applications

    -Premise data network cabling and installations Central office locations for Telco applications Head-end location for CATV applications Termination of interconnect cables at entry or intermediate cross connects Termination of horizontal cables, cross connection or backbone cables to jumper cables -Splice capability with splice trays loaded.

    Features and Benefits

    • Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides Strain-relief hardward and routing guides help maintain minimum bend radius "D" shaped cutouts at front and rear for easy access of cable Available fully populated with adapters, pigtails and slice trays or unloaded Labeling kit, zip ties and installation screws included
    • Competitive pricing and prompt delivery

    *Note: Clear front door is not available

    ATS-RAC-1x Rack Mount Fiber Optic Enclosure-Price $141.67 Each

    36 Port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Patch Panel Part No. ATSRAC-1X- Price $97.00
    Dimensions: Width = 17'', Depth = 12'', Height = 1.75''
    Weight (unloaded): 10.3 lbs.
    Port Capacity: 6-36
    Features: 1U rackmount can be loaded with up to 3 panels with 6 to 36 port capacity. Reversible mounting bracket for 19'' or 23'' racks. 16-gauge steel with black powder finish coat. Steel door at front and at rear with ¼ turn latches. Top lid removable at both front and rear. Cable management spools in the rear of the enclosure and cable management rings to the front for jumper management. Sliding tray for access to both front and rear. Large entry points at front for easy jumper management, as well as "D" shaped cutouts at rear for access of backbone cable. Accessory pack included with additional cable management, label holders and screws for securing to rack and top panels. Labeling kit included for clear and precise identification of ports.
    Lead time: In Stock, Immediate Shipment

    Part No. ATSRAC-2X-Price $170.18 each
    Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
    Weight (unloaded): 12 lbs.
    Port Capacity: 6-72
    Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
    Lead time: In Stock, Immediate Shipment

    ATS-RAC-24 x Rack Mount Fiber Optic Enclosure-Price $164.31 each

    ATS 19” Rack Mount Fiber Optic Enclosure ATS 19” Rack Mount Fiber Optic Enclosure

      Features and Benefits

    • Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides Strain-relief hardward and routing guides help maintain minimum bend radius "D" shaped cutouts at front and rear for easy access of cable Available fully populated with adapters, pigtails and slice trays or unloaded Labeling kit, zip ties and installation screws included
    • Competitive pricing and prompt delivery

    Part No. ATSRAC-12-OP ATS19" 12 Port Rack Mount Enclosure, Holds 2 ( 6 Packs ) Price $ 56.00

    Part No. ATSRAC-24x-OP ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 85.00

    New is a ATS-RS24 and ATS F1-RS72 rack mount splice and termination enclosure. Allows for patching on top and convenient organization of splice trays in the bottom shelf. Both 24 and 72 patch and splice versions are available. Call or Click Here ATS at (866) 342-3721 to order in black 16 gauge steel. .

    • Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
    • Call or Click Here ATS at (866) 342-3721 to order in black 16 gauge steel.

    Part No. ATSRS-24 ATS 19" 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ) Price $ 189.00 each

    Part No. ATSRS ATS 72 Port Rack Patch & Splice Enclosure ) Price $ 270.00 each

    The ATS Rack Mount Enclosure is designed for low or high density patching applications. This sturdy 16 gauge aluminum rack enclosure is available in 24, 48, 72, 96 and 144 port versions in standard beige. This unit provides a lift-off door with front and back access to the slideout tray. The ATS Rack Mount Enclosure features a smoked Lexan front door. Call or Click Here ATS at 1-866-342-3721 to order in black 16 gauge steel.

    • Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
    • Call or Click Here ATS at (866) 342-3721 to order in black 16 gauge steel.ATS-F1RM144X - 144 Port Rack Mount Enclosure, unloaded, holds 24 six packs, 13 1/2"D x 17 1/8"W x 15"H, 19lbs.  
      ATS-F1RM24XA - 24 Port Rack Mount Enclosure, unloaded, holds 4 six packs, 13 1/4"D x 17 1/8"W x 3 1/2"H, 12lbs.
      ATS-F1RM48X - 48 Port Rack Mount Enclosure, unloaded, holds 6 eight packs, 13 1/4"D x 17 1/8"W x 4 3/4"H, 14lbs.
    • ATS-F1RM72X - 72 Port Rack Mount Enclosure, unloaded, holds 12 six packs, 13 1/4"D x 17 1/8"W 7 1/8"H, 17lbs.

    Part No. ATS-F1RM144X- ATS 144 Port Rack Mount Enclosure, Holds 24 ( 6 Packs ) Price $ 245.00 each

    Part No. ATS-F1RM24XA -ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 99.00 each Part No. ATS-F1RM48X- ATS 48 Port Rack Mount Enclosure, Holds 6 ( 8 Packs ) Price $ 112.00 each

    Part No.ATS-F1RM72X ATSATS 72 Port Rack Mount Enclosure, Holds 12 ( 6 Packs ) Price $170.00 each

    FIS24 PortRac Mount Enclosure, Holds 4 ( 6 Packs )

    24 port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Optic Patch Panel Part No. ATSRAC-12X-Price $96.00
    Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
    Weight (unloaded): 12 lbs.
    Port Capacity: 6-24
    Features: 2U rackmount can be loaded with 2 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
    Lead time: In Stock, Immediate Shipment

    48 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATSRAC-24X- Price $100.50
    Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
    Weight (unloaded): 12 lbs.
    Port Capacity: 6-48
    Features: 2U rackmount can be loaded with 4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
    Lead time: In Stock, Immediate Shipmen
    t

    72 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATS RAC-2X- Price $170.18 each
    Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
    Weight (unloaded): 12 lbs.
    Port Capacity: 6-72
    Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Sliding tray for high-density situations. Spools at the rear for neat and clean cable management.
    Lead time: In Stock, Immediate Shipment

    144 Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X Price- $251.72 each
    Dimensions: Width = 17'', Depth = 12'', Height = 7''
    Weight (unloaded): 11.5 lbs.
    Port Capacity: 6-144
    Features: 4U enclosure can be loaded with 12 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder finish coat.
    Lead time: In Stock, Immediate Shipment

    Data Center Enclosures

    ATS Part No. DMAX-1X-EN-X-LOUM-16-C- Price each $371.55

    16 Port LC Fiber Optic Rack Enclosure
    Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 16 Duplex LC Ports (32 Fiber Capacity) with Wire Management

    ATSEnPart No. DMAX-1X-EN-X-LOUM-32 - 32 Port Fiber Optic Rack Enclosure
    Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 32 Duplex LC Ports (64 Fiber Capacity)

    DMAX-1X-EN-X-LOUM-32 Price $495.40 each
    Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 32 Duplex LC Ports (64 Fiber Capacity)

    ATS Part No. DMAX-1X-EN-X-LOUM-32-C-Price each $495.40

    32 Port LC Rack Mount Enclosure
    Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 32 Duplex LC Ports (64 Fiber Capacity) with Wire ManagementATSEnPart No. DMAX-1X-EN
    Features: 1U Data Center Enclosure, Sliding Rack Mount, 1U Black, Supports 3 AP Series Standard Faceplates or Cassettes

    ATSEnPart No. DMAX-1X-EN-C- FiberOptic Enclosure
    Features: 1U Data Center Enclosure, Sliding Rack Mount, 1U Black, Supports 3 AP Series Standard Faceplates or Cassettes with Wire Management

    Part No. DMAX-1X-EN-Price each $235.63
    Features: 1U Data Center Enclosure, Sliding Rack Mount, 1U Black, Supports 3 AP Series Standard Faceplates or Cassettes

    Part No. DMAX-2X-EN-C-$322.99 each
    Features: 2U Data Center Enclosure, Sliding Rack Mount, 1U Black, Supports 3 AP Series Standard Faceplates or Cassettes with Wire Management

    DMAX-2X-EN-X-LOUM-32-C Price Each $570.69
    Features: 2U Data Center Enclosure, Sliding Rack Mount, Black, 32 Duplex LC Ports (64 Fiber Capacity) with Wire Management

    Rack Mount Enclosures

    Signamax Rack Mount Fiber Optic Enclosures- more info

    Rack Mount Fiber Patch Panels The two-rack space four & six module fiber optic enclosures provide additional capacity for higher fiber count requirements, enabling up to 48 fiber capacity in the four module enclosure, and up to 144 fibers in the 12-module version. Both enclosures feature recessed front panel, facilitating coupling access, and two access doors in front and rear. The plexi-glass front panel enables visual inspection when closed. All Signamax connector interface modules are compatible with the two-rack space enclosure.

    Part Number

    Description

    Suggested Price

    UFE4-B

    4-Module (24 to 48 Fiber) Rack Mount Enclosure, Black

    UFE6-B

    6-Module (36 to 72 Fiber)Rack Mount Enclosure, Black

    UFE12-B

    12-Module (72 to 144 Fiber) Rack Mount Enclosure, Black

    FST-12A

    12-Fiber Aluminum Splice Tray for UFE Series Enclosures

    FST-24A

    24-Fiber Aluminum Splice Tray for UFE Series Enclosures

    Slide-Out Rack-Mount Panel2-Module Low Profile Slide-Out Rack Mount Fiber Optic Enclosure Signamax slide-out rack-mount panel provides a simple, high-density, low profile solution for easy access and management of fiber optic terminations in a one-rack space design. The rack-mount sliding tray panel accommodates up to 24 fibers in ST, SC, MTRJ and LC connector interfaces. The sliding-tray is equipped with slack-fiber storage spools, and comes complete with a number of cable management devices for organizing cables entering and exiting the panel. An optional splice tray is available.

    Part Number

    Description- Slide Out Rack Mount Panel

    Price

    SL2M-B

    2-Module (12 to 24 Fiber) Rack Mount Enclosure, Black

    FST-2M-B

    12 Fiber Splice Tray for SL2M-B

    Wall Mount Fiber Optic Enclosures-more info

    Signamax wall-mount fiber optic enclosures manage, protect & organize fiber optic terminations for single and multi-mode fiber optic cables. Enclosures accept Signamax modules to accommodate a variety of connector interfaces The WFE-2 supports from 12 to 24 fiber counts while the WFE4 accommodates from 12 to 48 fibers. Enclosures and connector modules are ordered separately.

    WFE2-B

    WFE4-B

    Signamax Wall Mount Fiber Optic Enclosures

    Wall Mount Fiber Optic Enclosure

    Part Number

    Description

    Price

    WFE2-B

    2-Module (12 to 24 Fiber) Wall Mount Enclosure, Black

    WFE4-B

    4-Module (24 to 48 Fiber) Wall Mount Enclosure, Black

    ST Fiber Patch Panels

    Part Number

    Description

    Price

    12ST-FT

    12-Port (12-Fiber) ST SM/MM Fiber Patch Panel

    16ST-FT

    16-Port (16-Fiber) ST SM/MM Fiber Patch Panel

    24ST-FT

    24-Port (24-Fiber) ST SM/MM Fiber Patch Panel

    32ST-FT

    32-Port (32-Fiber) ST SM/MM Fiber Patch Panel

    48ST-FT

    48-Port (48-Fiber) ST SM/MM Fiber Patch Panel

    -SC Fiber Patch Panels

    Part Number

    Description

    Price

    12SC-FT

    12-Port (12-Fiber) SC SM/MM Fiber Patch Panel

    Call or Click Here

    16SC-FT

    16-Port (16-Fiber) SC SM/MM Fiber Patch Panel

    Call or Click Here

    24SC-FT

    24-Port (24-Fiber) SC SM/MM Fiber Patch Panel

    Call or Click Here

    32SC-FT

    32-Port (32-Fiber) SC SM/MM Fiber Patch Panel

    Call or Click Here

    48SC-FT

    48-Port (48-Fiber) SC SM/MM Fiber Patch Panel

    Call or Click Here

    LC Fiber Optic Patch Panels

    Part Number

    Description

    Price

    12LC-FT

    12-Port (12-Fiber) LC SM/MM Fiber Patch Panel

    16LC-FT

    16-Port (16-Fiber) LC SM/MM Fiber Patch Panel

    24LC-FT

    24-Port (24-Fiber) LC SM/MM Fiber Patch Panel

    32LC-FT

    32-Port (32-Fiber) LC SM/MM Fiber Patch Panel

    48LC-FT

    48-Port (48-Fiber) LC SM/MM Fiber Patch Panel

    MTRJ Fiber Patch Panels

    Part Number

    Description

    Price

    12MTRJ-FT

    12-Port (24-Fiber) MT-RJ SM/MM Fiber Patch Panel

    16MTRJ-FT

    16-Port (32-Fiber) MT-RJ SM/MM Fiber Patch Panel

    24MTRJ-FT

    24-Port (48-Fiber) MT-RJ SM/MM Fiber Patch Panel

    32MTRJ-FT

    32-Port (64-Fiber) MT-RJ SM/MM Fiber Patch Panel

    48MTRJ-FT

    48-Port (96-Fiber) MT-RJ SM/MM Fiber Patch Panel

    WFE2-B

    12-Port Fiber Optic Mini Wall Mount Panels

    Part Number

    Description

    Price

    12MST-FT

    12-Port (12-Fiber) ST MM/SM Fiber Panel w/89D Bracket

    12MSC-FT

    12-Port (12-Fiber) SC MM/SM Fiber Panel w/89D Bracket

    12MMTRJ-FT

    12-Port (24-Fiber) MT-RJ MM/SM Fiber Panel w/89D Bracket

    12MHST-FT

    12-Port (12-Fiber) ST MM/SM Fiber Hinged Panel

    12MHSC-FT

    12-Port (12-Fiber) SC MM/SM Fiber Hinged Panel

    12MHMTRJ-FT

    12-Port (24-Fiber) MT-RJ MM/SM Fiber Hinged Panel

    ATS Carries A Complete Range Of Fiber Optical Enclosures-Fiber Distribution Enclosures-Optical Entrance Enclosures

    AFL Fiber Closures

     

     

     

     

     

    AFL-LL-400b Optical Splicing EnclosuresAFL-LL-400b Pedestal Optical Splicing Enclosures

    Due to Rapidly fluctuating Wholesale Metal and Commodity Costs-The Following Fiber Optic Enclosure Prices Are Suggested List Prices Only! Please Call or Click Here To Get Your Discount At

    (866) 342-3721

    ATS Part Number Type Fiber Optic Enclosure Fiber Optic Enclosures-Fiber Optic Patch Panels Suggested Price List
        Description Price
    ATSRAC-1X Rack Mount 1U, 3-Panel, w/Sliding Tray $141.67
    ATSRAC-1X-EXT Rack Mount 1U, 3-Panel, w/Sliding Tray, EXTENDED TO 15" $159.53
    ATSRAC-2X Rack Mount 2U, 6-Panel $170.18
    ATSRAC-2X-EXT Rack Mount Fiber Optic Enclosure 2U, 6-Panel, EXTENDED TO 15" $204.85
    ATSRAC-4X Rack Mount Fiber Optic Enclosure 4U, 12-Panel $251.72
    ATSRAC-4X-EXT Rack Mount Fiber Optic Enclosure 4U, 12-Panel, EXTENDED TO 15 " $298.19
    ATSRAC-8X-EXT Rack Mount Fiber Optic Enclosure 8U, 24-Panel, EXTENDED TO 15 " $576.39
    ATSRAC-12X Rack Mount 2U, 2-Panel $158.83
    ATSRAC-12X-EXT Rack Mount 2U, 2-Panel, EXTENDED TO 15" $185.64
    ATSRAC-24X Rack Mount 2U, 4-Panel $164.31
    ATSRAC-24X-EXT Rack Mount 2U, 4-Panel, EXTENDED TO 15" $194.91
    DMAX-1X-EN Sliding Rack Mount 1U, Black, 3 Panel, No Adapters $235.63
    DMAX-1X-EN-X-LOUM-12 Sliding Rack Mount 1U, Black, 12-Port, Duplex, LC, Aqua $339.94
    DMAX-1X-EN-X-LOUM-16 Sliding Rack Mount 1U, Black, 16-Port, Duplex, LC, Aqua $371.55
    DMAX-1X-EN-X-LOUM-32 Sliding Rack Mount 1U, Black, 32-Port, Duplex, LC, Aqua $495.40
    DMAX-2X-EN-C Sliding Rack Mount 2U, Black, 3 Panel, No Adapters, w/Wire Management $322.99
    DMAX-2X-EN-X-LOUM-12-C Sliding Rack Mount 2U, Black, 12-Port, Duplex, LC, Aqua w/Wire Management $415.23
    DMAX-2X-EN-X-LOUM-16-C Sliding Rack Mount 2U, Black, 16-Port, Duplex, LC, Aqua w/Wire Management $446.84
    DMAX-2X-EN-X-LOUM-32-C Sliding Rack Mount 2U, Black, 32-Port, Duplex, LC, Aqua w/Wire Management $570.69
    DMAX-4X-EN Rack Mount 4U, Black, 12 Panel, No Adapters $35.00
    ATSRAC-36X Rack Mount Fiber Optic Enclosure 2U, 6-Panel, w/Sliding Tray $220.35
    ATSDMAX-1X-EN Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 3 Panel, No Adapters $235.63
    ATSDMAX-1X-EN-X-LOUM-12 Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 12-Port, Duplex, LC, Aqua $339.94
    ATSDMAX-1X-EN-X-LOUM-16 Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 16-Port, Duplex, LC, Aqua $371.55
    ATSDMAX-1X-EN-X-LOUM-32 Sliding Rack Mount Fiber Optic Enclosure 1U, Black, 32-Port, Duplex, LC, Aqua $495.40
    ATSDMAX-2X-EN-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 3 Panel, No Adapters, w/Wire Management $322.99
    ATSDMAX-2X-EN-X-LOUM-12-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 12-Port, Duplex, LC, Aqua w/Wire Management $415.23
    ATSDMAX-2X-EN-X-LOUM-16-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 16-Port, Duplex, LC, Aqua w/Wire Management $446.84
    ATSDMAX-2X-EN-X-LOUM-32-C Sliding Rack Mount Fiber Optic Enclosure 2U, Black, 32-Port, Duplex, LC, Aqua w/Wire Management $570.69
    ATSDMAX-4X-EN Rack Mount Fiber Optic Enclosure 4U, Black, 12 Panel, No Adapters $35.00
    ATSWAC-1X Wall Mount Fiber Optic Enclosure 1 Panel $55.39
    ATSWAC-2X Wall Mount Fiber Optic Enclosure 2 Panel $59.64
    ATSWAC-2X-EXT Wall Mount Fiber Optic Enclosure 2 Panel, Larger storage area $113.73
    ATSWAC-4X Wall Mount Fiber Optic Enclosure 4 Panel $85.14
    ATSWAC-8X Wall Mount Fiber Optic Enclosure 8 Panel $183.22
    ATS300-360-028 Wire Management 1U, Black, 4-ring, Left and Right Pass Thru $87.27
    ATS300-360-029 Wire Management 2U, Black, 4-ring, Left and Right Pass Thru $95.61
    ATS300-360-030 Wire Management 2U, Black, 4-ring, Left and Right Pass Thru w/Rear Tray $101.36

    Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATS WAC-1X
    Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
    Weight (unloaded): 2.1 lbs.
    Features: Fiber Optic Wall Mount Enclosure- Pact Panel.Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
    Lead time: In Stock, Immediate Shipment
    ------------------------------------

    Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
    Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
    Weight (unloaded): 6.85 lbs.
    Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
    Lead time: In Stock, Immediate Shipment

    Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
    Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
    Weight (unloaded): 7.95 lbs.
    Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
    Lead time: In Stock, Immediate Shipment

    Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
    Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
    Weight: 12.7 lbs.
    Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
    Lead time: In Stock, Immediate Shipment

    144 Port Fiber Optic Enclosure- Fiber Optic Patch PanelPart No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.-----

    --- Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
    Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
    Weight (unloaded): 6.85 lbs.
    Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
    Lead time: In Stock, Immediate Shipment

    Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
    Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
    Weight (unloaded): 7.95 lbs.
    Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
    Lead time: In Stock, Immediate Shipment

    Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
    Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
    Weight: 12.7 lbs.
    Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
    Lead time: In Stock, Immediate Shipment

    144 Port Fiber Optic Enclosure- Fiber Optic Patch PanelPart No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.

    ATS "Six" Packs

     Available are ATS adapter panels with pigtails for splicing.  This kit includes 1, 6, or 8 pack loaded adapter panel with pigtails. Connector styles are indicated and standard length of pigtails are 3 meters. Pigtails are TIA-568-A color coded.  Contact your ATS sales associate at 1-866-342-3721 for custom adapter/pigtail kits.Singlemode Six Pack Kits - 3 meters

      ATSP6SCSM - (1) SC SM 6 pack with 6 SC/UPC pigtails
      ATSP6FCSM - (1) FC SM 6 pack with 6 FC/UPC pigtails
      ATSP6STSM - (1) ST SM 6 pack with 6 ST/UPC pigtails
      ATSP8SCSM - (1) SC SM 8 pack with 8 SC/UPC pigtails
    • ATSP6DSCSM - (1) Duplex SC SM 6 pack with 12 SC/UPC pigtails

    Multimode Six Pack Kits - 3 meters

    • ATSP6SCMM  - (1) SC MM 6 pack with 6 SC pigtails
      ATSP8SCMM - (1) SC MM 8 pack with 8 eight SC pigtails
    • ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

    ATSP6SCSM-1-SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price$ 160.00

    ATSP6FCSM-1-FC Singlemode 6 Pack with 6-FC/UPC Pigtails Price $ 92.00

    ATS-P6STSM-1-SC Multimode 6 Pack with 6-SC/UPC Pigtails Price $ 50.00 ATSP8SCSM-1-SC Singlemode 6 Pack with 6-SC/UPC Pigtails Price $ 81.00 ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00 ATSP8SCMM-1-ST Singlemode 6 Pack with 6-ST/UPC Pigtails Price $ 82.00 ATSP6STMM-1-SC Singlemode 8 Pack with 8-SC/UPC Pigtails Price $ 99.00

    ATS Snap Six- Packs For Distribution FramesThese pre-terminated adapter panels provide convenience to technicians splicing into fiber distribution frames.  Available in 6 or 12 fiber bundles with TIA-598-A standard color code, these bundled fibers provide cable management from patchpanel to splice bays. Standard 3 meters. Contact ATSat 1-866-342-3721 for custom lengths and different connector style adapter panels

    Singlemode Six Pack- Eight Pack Kits - 3 meters

    • ATSC6LSSP - (6) adapters, SC/UPC, 6 fiber pigtail, SM, 3 meters
    • ATSSC6LSSP - (6) duplex adapters, SC/UPC, 12 fiber pigtail, SM, 3 meters
      ATSC6APCSP - (6) adapters, SC/APC, 6 fiber pigtail, SM, 3 meters
      ATSC6DLSP - (6) duplex adapters, LC/UPC, 12 fiber pigtail, SM, 3 meters
    • ATST6LSSP - (6) duplex adapters, ST, 12 fiber pigtail, SM, 3 meters
    • Multimode Six Pack- 8 Pack Kits - 3 meters
    • ATSC6LMSP - (6) duplex adapters, SC, 12 fiber pigtail, MM, 3 meters
    • ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

    PRICING:

    ATSC6LSSP - 1 SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price $ 190.70 each

    ATSSC6LSSP - 1-SC Singlemode 6 Pack with 6-SC/UPC Pigtails Price $ 76.90 each

    ATSC6APCSP - 1 SC Singlemode 6 Pack with SC/APC Pigtails Price $ 95.50 each ATSC6DLSP - 1-LC Duplex Singlemode 6 Pack with 12-LC/APC Pigtails Price $ 190.70 each ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00 ATST6LSSP-1ST Multimode 6 Pack with 6 ST/PC Pigtails$ 86.00 each ATST6LSMP -1 -ST Multimode 6 Pack with 6 ST/PC Pigtails Price $ 58.00 each

    Pricing For Six Pack-8 Pack Plates For Wall & Rack Mount Fiber Optic Enclosures

     

    ATS-Blank

    ATS Blank Blank Plate with No Holes

    ATSSC6LM6 Loaded-SC Duplex Multimode-Singlemode Adapters $ 48.80
    ATSFC66 Pack Plate (unloaded) $ 4.75
    ATSFC6APC6 Pack Loaded with FC/APC Singlemode Adapters $ 49.20
    ATSF1FC6L6 Pack Loaded w/FC-Multimode/Singlemode Adapters $ 37.90
    ATSF1LC6DL6 Pack Loaded w/LC Duplex-Singlemode Adapters $ 52.20
    ATSF1LC6L6 Pack Plate Loaded w/LC Duplex-Multimode Adapers $ 31.45
    ATSF1MTRJ6L6 Pack Loaded w/MTRJ Multimode Adapters $ 21.70
    ATSF1SC66 Pack SC Plate ( Unloaded) $ 4.75
    ATSF1SC6APC6 Pack Loaded w/SC/APC Singlemode Adapters $ 28.90
    ATSF1SC6L6 Pack Loaded w/SC-Multimode/Singlemode Adapters $ 19.95
    ATSF1SC88 Pack SC Plate (Unloaded) $ 4.75
    ATSF1SC8LM8 Pack Loaded with SC Multimode Adapters $ 24.90
    ATSF1SC8LS8 Pack Loaded w/ SC -Singlemode Adapters $ 35.75
    ATSF1ST66 Pack ST Plate (Blank- Unloded) $ 4.75
    ATSF1ST6LM6 Pack Plate Loaded w/ST -Multimode Adapters $ 21.10
    ATSF1ST6LS6 Pack Loaded w/ ST Singlemode Adapters $ 29.97
    ATSF1ST88 Pack ST Plate (Unloaded) $ 4.75
    ATSF1ST8LM8 Pack Loaded w/ ST- Multimode Adapters $ 23.75
    ATSF1ST8LS8 Pack Loaded w/ ST-Singlemode Adapters $ 37.75

    Fiber Optic Enclosure Pricing

    AFL Telecommunications Fiber Closures

    Splice Closures are designed to simplify splice management. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant. Closures are designed and tested to Telcordia™ GR-771 requirements and Rural Utilities Service (RUS) listed.he AFL family of Aerial Weathertight Splice Closures is designed to provide a cost-effective solution for your aerial splicing needs. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant. * LG-410
    * LG-420
    * LG-500
    * LG-600Features: * Individual, patented, self-sizing cable grommets and strength member tie downs provide for cable additions without disturbing those previously installed
    * Unique tongue-in-groove closure seal and back-to-back grommet design provides for a weathertight and insect seal
    * Easy to maintain, all aerial closures are re-enterable without the need for any re-entry kits, special tools or sealants
    * Designed and tested to Telcordia™ GR-771 aerial weathertight closure requirements
    * Rural Utilities Service (RUS) listed

    NEMA RATED Outdoor FIBER OPTIC ENCLOSURES We can supply you with a full line of standard and special NEMA rated enclosures and components well suited for Homeland Security Product support. Our own complete fiber-optics product offering can be leveraged in certain cases to minimize lead-time and provide value added solutions in a short time period.

    ----

     

    Rack Mount Enclosures

     

    ---------Wall Mount Fiber Enclosures----------------------------------------

    ------------------------------------------- -

    CNSLL-24&48 Fiber Termination & Splicing Shelf-CON288HD - Fiber Termination Patch Panel CNS024P-Patch & Splice Panel-CON012P - Fiber Termination Patch Panel- CON024P - Fiber Termination Patch Panel Fiber Storage Units (FSU) are used to conveniently and safely store an extra length of cable along the support strand for later use. Furnished as pairs, these FSUs feature all aluminum, baked acrylic enamel finish and all basic hardware for attachment to the support strand. Strand mount support brackets meet Telcordia® specification and are REA accepted. Galvanized strand clamping devices accommodate 1/4" to 7/16" strand and meet ASTM specifications A153 and B695.Features: * Furnished as pairs
    * All aluminum construction with full welded cross members
    * Baked acrylic enamel finish/chromate pre-finish per MIL-C-5541-B
    * Basic hardware (bolts, nuts and washers) for attachment of strand mount support brackets
    * Tie-wrap slots for securing cable from sliding
    * Strand-mount port brackets meet Telcordia specification and are REA accepted
    * Galvanized strand clamping devices accommodate 1/4" to 7/16" strand and meet ASTM specifications A153 and B695

     

    Outdoor FTTH-Fiber Pedestals & Enclosures

    ICC Fiber Patch Panels Click Here12 Port-ST-25 Port ST-SC

     

     

    Front & Rear Loading Fiber Optic Patch Panels
    Our new fiber optic enclosures by Contech and fiber patch panels are available in multiple configurations with high density port counts in a minimum of space, which provide an extremely organized above the floor infrastructure and manageable cable reconfiguration. ConTech features a 256 port high density panel with either LC, MT-RJ, or MU connector configurations in the same foot print for migration ease from one connector style to another. Also available are high density 12 to 48 port 1 rack unit panels with ribbon array connectivity MP or MTP connectors
    Front & Rear Mounted Fiber Optic Enclosures

    • Versatile cassettes High density Front access Rear access Under floor
      Innovative wire management
      Retro-fit of existing panels LC, MT-RJ, MU, SC duplex Custom silk screening
    • 19, 23, or 24 inch mounting

    Outdoor-Fiber Pedestals & Enclosures

    Pedlock BDO Series Pedestals are a key element of any FTTP solution. In both greenfield and brownfield fiber deployments, BDO Pedestals provide easy access to branch and drop splice while protecting and storing loose buffer tube fiber optic cables. The exclusive BDO bracket allows technicians to mount splice trays and splitters securely with ample access to perform in-field splicing.
    BDO Pedestals feature a non-metallic construction that offers super OSP protection against floods, fire, dirt, insects and impact. An expanded-capacity split base is designed to easily install around conduit-fed cable bundles in new construction (excludes 14” diameter pedestals). BDO pedestals are an ideal solution for rehabilitation of metallic enclosures, and protection of co-located copper/fiber distribution points. The CMPH is a versatile OSP closure designed for both new provisioning installations as well as rehabilitation of existing access points housed in metallic enclosures. The CMPH’s superior structural strength, outstanding environmental protection and ease of installation combine to create a long-life housing that reduces operational expenses.

    A two-piece assembly features a lift-off dome and a corrugated channel base. The lift-off dome allows 360º access to internal working areas and includes self-latching locks with secondary bolt locks on both left and right side panels. The dome provides “bell jar” flood protection, eliminates intrusion of wind-blown rain and dust, and prevents unauthorized entry. The base provides ample room for entry of multiple large cables, including conduit. A spacious bottom entry allows technicians to easily slide the base over existing large cable rehabilitation applications.Internally, the CMPH features a sturdy metal bracket with craft-friendly repositionable splice bars, a cable splice support rail, and a 6-point bonding/grounding bar. The spacious internal working area accommodates copper splices of 1,800 to 3,600 pairs or passive fiber optic equipment (interconnect and splitter). The CMPH is an exceptional protection solution for copper/fiber co-locations.

     

    Main Distribution Frames- Network Bays-Open Bay Systems

     

    "Don't Gamble with Quality - Buy American"

    and visit this link for sample pricing

    Fiber Optic Assembly Pricing

    Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

    Home | Cables | Switches | Contact Us | Our Team | Locations

    Click to see a general review of fiber optic technology

    - 2010 All Rights Reserved -

 

 

Corning Fiber Jumpers

Bend Bright Fiber Assemblies

 

Fiber Optic Adapters

foa8mm01.gif (11826 bytes)

 

Fiber Optic Connectors

 

Fiber Optic Attenuators

 

 

Fiber Optic Media Converters

Fiber Optic Enclosures

Fiber Optic Cables

Fiber Optic Test Equipment

Mode Conditioning Cables

Fan Out Cables

MPO Cassettes

 

 

 

 

Fiber Optic Adapters

foa8mm01.gif (11826 bytes)

 

Fiber Optic Connectors

 

Fiber Optic Attenuators

 

 

Fiber Optic Media Converters

Fiber Optic Enclosures

Fiber Optic Cables

Fiber Optic Test Equipment

Mode Conditioning Cables

Fan Out Cables

MPO Cassettes