American Owned and Operated
Fiber Optic Jumpers

Distribution Enclosures and Boxes
Distribution Box - Economy Wall Mount


Adapter Panels and Adapters

Fiber Optic Jumpers

     About Us

2002 American Tech Supply

 

Mode Conditioning Cable-Mode Conditioning Fiber Cables- Fiber Mode Conditioning Cables- Mode Conditioning Cable

MODE CONDITIONING FIBER OPTIC CABLE--Ultra high quality mode conditioning cable and mode conditioning patch cables for Gigabit Ethernet applications is required where Gigabit 1000 Base-LX routers and switches are installed into existing multimode cable plants. We offer Mode Conditioning cables in most common varieties and combinations ofSC, ST, MT-RJ and LC- we offer short lead times.

Mode conditioning cable are normally used in pairs. That means that you will need a MC cable at each end to connect the equipment to the cable plant. So then these cables are usually ordered in even numbers. The usual reason why someone may order one cable is so they may keep it as a spare.

If your gigabit LX switch is equipped with SC or LC connectors, please be sure to connect the yellow leg (Singlemode) of the cable to the transmit side, and the orange leg (multimode) to the receive side of the equipment. It is imperative that this configuration be maintained on both ends. The swap of transmit and receive can only be done at the cable plant side.

  • Environmentally sealed construction
  • Insertion Loss: <0.5
  • Back reflection (Singlemode end)>50dB
  • Optical offset to IEEE 802.5

Mode conditioning cables are designed for Gigabit Ethernet multimode applications at 1300nm wavelength; the application standard is IEEE 802.3z. All mode conditioning fiber optic patch cords are made with duplex cable; with a single mode to multimode offset fiber connection part in one of the two legs.

SC Equipment Side:
LC Equipment Side:
MT-RJ Equipment Side

SC to SC
Mode Conditioning Cables

LC to LC
Mode Conditioning Cables

MT-RJ to MT-RJ
Mode Conditioning Cables

SC to ST
Mode Conditioning Cables

LC to ST
Mode Conditioning Cables

MT-RJ to ST
Mode Conditioning Cables

SC to LC
Mode Conditioning Cables

LC to SC
Mode Conditioning Cables

MT-RJ to SC
Mode Conditioning Cables

SC to MT-RJ
Mode Conditioning Cables

LC to MT-RJ
Mode Conditioning Cables

MT-RJ to LC
Mode Conditioning Cables

 

Mode Conditioning Cables
Price: From $59.95 and Up

Here is the reason we need to use the mode conditioning patch cord : the Gigabit Ethernet application standard requires the use of fiber optic light to achieve the specified data transmitting rates. Usually people use long wave transceiver modules for Gigabit Ethernet, these modules have to operate both single mode and multi mode fibers. And as we know, multimode fiber manufacturing techniques create index of refraction anomalies along the centerline of the multi mode fiber core. When a highly concentrated single mode fiber optic light is sent into the center of a multimode fiberglass, the modes that propagate through the index of refraction anomalies spread out in time causing modal dispersion, this effect is called differential mode delay. Differential mode delay results in reduced bandwidth over distance. By allowing the single mode laser launch to be offset away from the center of the multi mode fiber the mode conditioning patch cord reduces the effect of such differential mode delay.

Catalyst 5000 Series
Mode-Conditioning Cables

Nortel Series Mode Condtioning Cable (e.g. AA0018036)

 

From the above descriptions we learn how to use such mode conditioning cables: when we use such mode conditioning fiber optic patch cords, we need to connect the yellow leg which is the color of single mode to connect the transmit side of the equipment (single mode Gigabit transceiver) while we connect the orange leg which is the color of multimode to the receive side. (Multimode Gigabit cable plant)

Call (866) FIBER-21 For Availability

SC- Mode conditioning Patch cords
62.5/125uM

Description SC Mode Conditioning Cables
Price
1 meter SC (equip.) to SC Mode Conditioning Cable
$88.30
2 meter SC (equip.) to SC Mode Conditioning Cable
$98.50
3 meter SC (equip.) to SC Mode Conditioning Cisco Type Cable
$99.50
4 meter SC (equip.) to SC Mode Conditioning Cable
$101.50
5 meter SC (equip.) to SC Mode Conditioning Cable
$103.50
6 meter SC (equip.) to SC Mode Conditioning Cable
$105.30
7 meter SC (equip.) to SC Mode Conditioning Cable
$108.50
8 meter SC (equip.) to SC Mode Conditioning Cable
$112.50
9 meter SC (equip.) to SC Mode Conditioning Cable
$114.50
10 meter SC (equip.) to SC Mode Conditioning Cable
$115.50
15 meter SC (equip.) to SC Mode Conditioning Cable
$118.50
20 meter SC (equip.) to SC Mode Conditioning Cable
$125.50
25 meter SC (equip.) to SC Mode Conditioning Cable
$125.50
30 meter SC (equip.) to SC Mode Conditioning Cable
$135.50
35 meter SC (equip.) to SC Mode Conditioning Cable
$ 148.50
40 meter SC (equip.) to SC Mode Conditioning Cable
$152.50
45 meter SC (equip.) to SC Mode Conditioning Cable
$162.50
50 meter SC (equip.) to SC Mode Conditioning Cable
$178.50
   

 

 

Fiber Optic Mode Conditioning Cables-SC Mode Conditioning Patch cords
62.5/125uM

SC-LC Mode Conditioning Cables

1 meter SC (equip.) to LC Mode Conditioning Cable

$125.01

2 meter SC (equip.) to LC Mode Conditioning Cable

$127.62

3 meter SC (equip.) to LC Mode Conditioning Cable

$130.23

4 meter SC (equip.) to LC Mode Conditioning Cable

$132.84

5 meter SC (equip.) to LC Mode Conditioning Cable

$135.45

6 meter SC (equip.) to LC Mode Conditioning Cable

$138.06

7 meter SC (equip.) to LC Mode Conditioning Cable

$140.67

8 meter SC (equip.) to LC Mode Conditioning Cable

$143.28

9 meter SC (equip.) to LC Mode Conditioning Cable

$145.89

10 meter SC (equip.) to LC Mode Conditioning Cable

$148.50

15 meter SC (equip.) to LC Mode Conditioning Cable

$161.55

20 meter SC (equip.) to LC Mode Conditioning Cable

$174.60

25 meter SC (equip.) to LC Mode Conditioning Cable

$187.65

30 meter SC (equip.) to LC Mode Conditioning Cable

$200.70

35 meter SC (equip.) to LC Mode Conditioning Cable

$213.75

40 meter SC (equip.) to LC Mode Conditioning Cable

$226.80

45 meter SC (equip.) to LC Mode Conditioning Cable

$239.85

50 meter SC (equip.) to LC Mode Conditioning Cable

$252.90

MTRJ- MTRJ- Mode Conditioning Cable

1 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$115.20

2 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$117.81

3 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$120.42

4 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$123.03

5 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$125.64

6 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$128.25

7 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$130.86

8 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$133.47

9 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$136.08

10 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$138.69

15 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$151.74

20 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$164.79

25 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$177.84

30 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$190.89

35 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$203.94

40 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$216.99

45 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$230.04

50 meter MT-RJ (equip.) to MT-RJ Mode Conditioning Cable

$243.09

Description

Your Price

1 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$111.60

2 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$114.21

3 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$116.82

4 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$119.43

5 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$122.04

6 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$124.65

7 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$127.26

8 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$129.87

9 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$132.48

10 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$135.09

15 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$148.14

 

20 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$161.19

 

25 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$174.24

30 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$187.29

35 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$200.34

40 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$213.39

45 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$226.44

50 meter MT-RJ (equip.) to SC Mode Conditioning Cable

$239.49

 

American Tech Supply stocks thousands of singlemode fiber optic jumpers and singlemode fiber optic assemblies in several types including ST and SC singlemode patch cables along with a complete assortment of fiber optic patch cords including LC singlemode, SC singlemode jumpers, and ST singlemode jumpers and adapters. Our singlemode jumpers, single mode patch cables and single mode assemblies come are available in a variety of sizes. To ensure the products' performance, our manufacturing process utilizes high quality connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations. We offer the finest quality fiber optic assemblies from several manufacturers including Emerson, Corning, ADC,Telect and more.

We have instock most on the fiber optic assemblies and fiber optic patch cables listed below. ATS provides the highest level of fiber optic patch cords connectivity for all your fiber interconnect applications.  Manufactured and tested to the tightest specifications, Bour patch cords exceed Telcordia GR-326 requirements.  Our precision zirconia ferrules and environmentally rugged connectors and cable assemblies ensure lasting, repeatable connections.Our fiber optic patch cables are optically tested and visually inspected to ensure that fiber optic return loss, insertion loss, and end-face geometry requirements are satisfied.  Our proprietary fiber optic connector polishing processes and fiber optic cable assembly techniques provide minimal back reflection and ultra low insertion loss.  All ATS supplier facilities worldwide are ISO 9000 registered.

American Tech Supply also carries military grade fiber optic assemblies. These military grade fiber optic assemblies use M28876-27 Connectors offer rugged military and industrial multifiber optical connectors for shipboard, indoor and outdoor requirements. These connectors are designed to perform in a wide range of environmental conditions. Plugs and receptacles have several key options to prevent configuration problems in systems using multiple connectors. The M28876 series products are available with cadmium-plated aluminum and stainless steel. For less critical environments, an aluminum with cadmium plate over electroless nickel may be used. Stainless steel may be an excellent solution for applications where contact with salt spray and other corrosive elements is possible. The M28876 series of connectors uses the M29504/14 & /15 terminals.

American Tech Supply Now stocks the newest 10 gigabit fiber opitc cable assemblies, multifiber assemblies,MTP fiber optic assemblies, indoor outdoor fiber optic assemblies, mode conditioning fiber optic assemblies and of course we welcome all custom fiber optic assmblies- info.

Pre-Terminated Multi-Fiber Assemblies-Info

MTP Cassettes-Info

For Simplex Fiber Optic Assemblies Click Here

American Tech Supply can normally ship all our fiber optic jumpers and fiber optic assmblies below the SAME DAY- provided we get your order before 1pm Pacific Time. We GUARANTEE THE LOWEST PRICES ON ALL OUR FIBER OPTIC PATCH CABLES incuding our singlemode jumpers, multimode jumpers, LC jumpers, ST jumpers, SC jumper, MTRJ jumpers, custom fiber optic assemblies-and fiber optic adapters.

HOW TO EXTEND YOUR ETHERNET SIGNAL MORE THAN 300 FEET USING FIBER OPTIC CABLE

July 1/2006 Due to massive fluctuations in the cost of oil, copper and raw goods- please call first to get latest pricing on all copper cables

Fiber Optic Adapters- We Stock Thousands of Fiber Optic Adapters
Pulling Fiber? Ask About our inexpensive Fiber Optic Pulling Eye Attachment

ATS also offer EXTREME DISCOUNTS for all fiber optic assembly orders over 50 pcs. Some discounts for single mode jumpers aand multimode jumpers can befrom 50% to 75% on orders for 50pcs and more.We offer even more discounts for ORDERS OF 100 PCS AND MORE-AT ONE TIME. Call us for additional savings. American Tech Supply also can provide you with most custom assemblies with 24 hour turnaround. Call us for quantity discount pricing. American Tech Supply will meet or beat any written quote from any supplier in the United States! We are American Operated!!

CALL (866) 342-3721

Please see our FIBER OPTIC Jumper-Patch Cords Pricing Below All of our fiber optic assemblies below can be shipped the same day- if the order is placed before 1pm Pacific Time. Custom fiber optic cable assemblies take 1-3 days to ship in order to meet specific requirements and specifications.WE WILL MEET OR BEAT ANY US BASED QUOTE ON FIBER OPTIC CABLE ASSEMBLIES WITHOUT SACRIFICING QUALITY!!

FIBER OPTIC Enclosures-Click Here

We specialize in building custom fiber optic cable assemblies to meet specific requirements and specifications. You can choose from assorted fiber optic cables and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performance. As with all of our fiber optic cable assemblies, all multifiber fiber optic cable assemblies are individually inspected and tested for optical performance. In addition, we can provide CAD drawings to help you with the installation. To ensure the products' performance, our manufacturing process utilizes high quality fiber optic connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber optic cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.

New Modular Fiber Systems

D: ST-SC Fiber Patch Cable--E: SC-SC Fiber Patch Cable F:ST-ST Fiber Patch Cable

FIBER OPTIC Jumper-Patch Cords Pricing Below

 

West Coast Sales (866) 342-3721 East Coast Sales (866) 650-3282

American Tech Supply stocks thousands of singlemode fiber optic jumpers and singlemode fiber optic assemblies in several types including ST and SC singlemode patch cables along with a complete assortment of fiber optic patch cords including LC singlemode, SC singlemode jumpers, and ST singlemode jumpers and adapters. Our singlemode jumpers, single mode patch cables and single mode assemblies come are available in a variety of sizes. To ensure the products' performance, our manufacturing process utilizes high quality connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.

American Tech Supply also can provide you with most custom assemblies with 24 hour turnaround. Call us for quantity discount pricing. American Tech Supply will meet or beat any written quote from any supplier in the United States! We are American Operated!!

Call Us For Military Spec Fiber Assemblies and Connestors-MIL-C-28876 Connector Systems
M28876-27 Connectors offer rugged military and industrial multifiber optical connectors for shipboard, indoor and outdoor requirements. These connectors are designed to perform in a wide range of environmental conditions. Plugs and receptacles have several key options to prevent configuration problems in systems using multiple connectors. The M28876 series products are available with cadmium-plated aluminum and stainless steel. For less critical environments, an aluminum with cadmium plate over electroless nickel may be used. Stainless steel may be an excellent solution for applications where contact with salt spray and other corrosive elements is possible. The M28876 series of connectors uses the M29504/14 & /15 termini.

Quick-turn multi-fiber assemblies are available in 50/125, 62.5/125 and 9/125 singlemode configurations for ST, SC, LC, MT-RJ and FC connectors. 10 Gbps 50/125 and MTP® trunk solutions are included in our Enterprise line, for these 2 items only.Our cable choices include indoor, outdoor, dual use - indoor/outdoor, armored cable, cable in conduit as well as traditional riser, plenum and low smoke / zero-halogen solutions. For part number structure,

We specialize in building custom cable assemblies to meet specific requirements and specifications. You can choose from assorted cables and connectors from different manufacturers. We can terminate the connector in many different ways, which will save you money without comprising performance. As with all of our fiber optic cable assemblies, all multifiber cable assemblies are individually inspected and tested for optical performance. In addition, we provide CAD drawings to help you with the installation. You can choose from assorted fiber optic cables and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performanceTo ensure the products' performance, our manufacturing process utilizes high quality fiber optic connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber optic cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.

SEE FIBER OPTIC Jumper Pricing Below

We carry a complete line of Fiber Optic Jumpers , Patch Panels, Fiber Optics Adapters, Singlemode & Multimode SC, ST, FC, LC, MTRJ Fiber Optic Jumpers, Fiber Optic Rack Mount Enclosures and Fiber Optic Enclosures.

- Variety of cable and connector types: indoor and outdoor, 1 to 288 strands
- 100% optically inspected
-Insertion loss tested; results shipped with each order
-CAD drawing available upon request for special configurations
-Cable assembly engineering and technical support available

Call Our Offices At (866) 342-3721 For Discounted Pricing and Custom Product Ordering-

We can make fiber optic patch cords for singlemode jumpers & multimode jumpers and assemblies at any length. We normally have a 1-2 day turn around for 'custom' orders

Always Ask For Special Project VOLUME Pricing- Massive Discounts For 50Pcs or more-Up to 75% Less!!

Fiber Optic Assemblies - Fiber Optic Enclosures

Call Our Knowlegeable Friendly Customer Service Reps At (866) FIBER-21

"Don't Gamble With Quality- Buy American"

To meet the growing demand for quality fiber optic solutions, American Tech Supply offers a wide range of reliable and affordable fiber optic products. As we move towards the future, our fiber manufacturer partners seek to solve problems in today's crowded telecom room and work area by providing small form factor (SFF) solutions. Our fiber work area outlet boxes fill the need for a smooth transition in bringing fiber to the desktop. The addition of fiber optic MT-RJ products in 1999, followed by the incorporation of LC products in 2001, shows our commitment to providing complete quality fiber solutions for all your needs.
Our extensive fiber optic solutions include fiber optic patch panels, adapters, distribution enclosures and boxes.ATS also offers fiber optic jumper cables for singlemode and multimode applications. Every product has been individually tested and certified to ensure that they exceed the most rigid industry specifications.

Designed to save both time and money, our fiber optic solutions are versatile and competitively priced. From the telecom room to the work area, we provides dependable, cost-effective Fiber Optic Solutions.When challenged to find reliable Fiber Optic Solutions for your business or customer, turn to ATS, where Quality Is Always Affordable.

---(866) FIBER-21

 

Fiber Optic Cable Home Page

Fiber Optic Enclosures-Click Here for a Complete List & pricing

 

Call ATS Today at (866) FIBER-21 or (866) 342-3721

   

©copyright 2003 American Tech Supply