Features:NEBS™ Telcordia® Certified GR-63 Zone 4 Seismic Cabinet DCZ4 Series - VIDEO

UL 2416 Rated 3,000 lbs Weight Capacity

Our zone 4 racks that are designed for data centers and or any telco room environment in a Zone 1, Zone 2, Zone 3 or Zone 4 prone regions from California, Alaska, Colorado, Oregon, Washington or the New Madrid fault area in Arkansas with the Hammond line of zone 4 data cabinets, (VIDEO) a proven world wide leader in zone 4 data cabinet technology. We also have the Knurr zone 4 data cabinets that are earthquake rated racks available as well that are custom built in California. Our most popular enclosure cabinet size for 19” servers and equipment called the P2 Zone 4 cabinet is available in various depths and heights; ideal for low to medium density applications.

Our Seismic racks and zone 4 racks have been designed and tested to meet Telcordia GR-63-CORE Network Equipment & Building Systems (NEBS) requirements for Zone 4 Seismic Earthquake Environments. It is designed for secure, high density server and networking applications in IT environments that are earthquake prone or subject to regular vibration, such as an data centers and all "zone 3 and Zone 4 areas of the USA and the world. Designed with options to integrate cooling, power distribution and cable management, our seismic racks and seismic cablinets make ideal equipment for mission-critical equipment. Vendor neutral square hole/cage nut mounting for guaranteed compatibility with all EIA-310-E compliant 19" equipment. Enclosures ship fully assembled for rapid deployment. Our design allows mounting for quick installation of PDUs and vertical cable managers. Adjustable mounting rails include and easy-view depth index to eliminate time-consuming measurements. Lightweight modular doors and side panels provide safe, convenient service access. Our seismic enclosures support cooling, cable management, power distribution and monitoring features that keep critical servers and network equipment operating nonstop. Perforated doors permit massie front to rear airflow that exceeds servers manufacturer requirements. Enclosures are fully compatible with hot-aisle / cold-aisle data center configurations.

¶Features

• Constructed in 14-gauge steel (body), 12-gauge steel corner braces and 16-gauge doors and side panels.
• EIA-310-D compliant 10-32 tapped or square hole punched rails with 19” mounting. (Rails include rack unit labels)
• Rugged design engineered to perform in the most critical seismic environments.
• Includes generous stud locations for grounding and bonding applications.
• Cable Management Includes
  • Four (4) 3.5” top cable access holes.
  • Various bottom panels allow different cable management options.
  • Corner braces include mounting for cable tray and outlet strips.
  • Support for up to four optional 4” deep vertical cable managers.
• Compatible with standard C2 top panels with options that include Solid, Vented, Fan cutouts.
  • Pre-installed fan(s) capable of up to 550 CFM.
• Solid Side panels available.
• Flush-mount doors come with 3-point latching and stiffeners to reduce flexing and bowing while increasing cabinet security.
  • Available in Solid, Window and 63% Perforated punch pattern.
• Handle features 4-pin combination lock with key override. Also compatible with electronic locking options.
• Ganging holes allow for joining multiple cabinets.
• Finished in textured black powder paint. Also available in textured white upon request.

Call or email us for custom pricing for your telco room or data center needs. Huge discounts apply for larger data centers!

NEW! We now have a full line of ZONE 4 rated data cabinets and zone 4 racks that are designed for data centers and or any telco room environment in a Zone 1, Zone 2, Zone 3 or Zone 4 prone regions from California, Alaska, Colorado, Oregon, Washington or the New Madrid fault area in Arkansas with the E- Systems line of zone 4 data cabinets, a proven world wide leader in zone 4 data cabinet technolog. We also have the Knurr zone 4 data cabinets that are earthquake rated racks available as well that are custom built in California. Our most popular enclosure cabinet size for 19” servers and equipment called the P2 Zone 4 cabinet is available in various depths and heights; ideal for low to medium density applications.Our standard 19” zone 4 data cabinet - rack mount zone 4 server cabinet supports most networking, server and storage needs. This model zone 4 data rack fits the footprint and requirements of the modern data center. Our 30” wide frame zone 4 data rack is ideal for 19” medium to hi-density applications with convertible rails to accept 23” telecom equipment mounting.This wider P2 19" enclosure is designed for medium to high density computing with extensive cabling and PDU capacity.

	P2 19″ Enclosure Features & Benefits
24″ Wide P2 Zone 4 Enclosures- Zone 4 Racks	30″ Wide P2 Enclosures- Zone 4 Racks- Zone 4 Earthquake Cabinets		36″ & 42″ Wide P2 Enclosures
Width: 24” Height: 42U, 44U, 48U Depth: 42” or 48” Rack Mount: 19” EIA-310-D Static Load: 3,000 lbs Dynamic Load: 3,000 lbs Zone 4 Rack Key Features Seismic Zone 4 Rated Optional Decorative Door	Width: 30” Height: 42U, 44U, 48U Depth: 42” or 48” Rack Mount: 19” EIA-310-D Static Load: 3,000 lbs Dynamic Load: 3,000 lbs Zone 4 Cabinet Key Features Seismic Zone 4 Rated Additional room on either side for cable management Rail Kits are 19” to 23” convertible Optional Decorative Door		Width: 36” or 42” Height: 42U, 44U, 48U Depth: 42” or 48” Rack Mount: 19” EIA-310-D Static Load: 3,000 lbs Dynamic Load: 3,000 lbs Key Features Additional room on either side for cable management. Can be configured with baffle kits to facilitate side-to-side airflow. Frame-within-frame construction to permit compatibility for mounting and airflow specifications

American Tech Supply carries a complete line of zone 4 data cabinets, earthquake cabinets, earthquake racks, seismic cabinets and seismic racks including the Zone 4 Newton relay racks which have been tested and certified as zone 4 relay rack and meets or exceeds other zone 4 relay racks. They are ideal for use in California, Colorado, WA, OR ,AK or wherever a Zone 4, Zone 2 or Zone 2 is required. Our zone 4 data cabinets and seismic racks are from E Systems, Quest, Kendall Howard, Knurr,Emerson, Newton, Bline, Hoffman and Chatsworth. Excellent for use in all RBOC data centers, central offices and switching centers. We are an authorized SAM government reseller and also have affiliations with a certified MWBE/DV enterprise to meet your minority business requirements. Newton's products fulfill every application from the telephone closet to the network room to your co-location data center.We also have available Hendry rack systems and racks for all you central office and data center needs.

Part Number MIR 20207-Pictured- Knurr Zone 4 Data Cabinet- Bellcore Rated Heavy Duty Data Cabinet

American Tech Supply is a national data cabinet supplier and as a data cabinet distributor can offer a wide selection of manufacturers for your specific tlelecommunications needs. American Tech Supply is a data cabinet distributor and carries a complete line of data cabinets, data enclosures, open bay racks, relay racks, LAN racks, enclosures, fiber optic enclosures, Zone 4 Racks, zone 4 data cabinets and seismic cabinets for data centers, communication closets, and communications centers. We also have Zone 4 data cabinets and zone 4 realay racks for earthquake enclosures preparedness and national security. The zone 4 seismic data cabinets are a new line of proven technology from Knurr - one of the world's three largest manufacturers of data cabinets, a division of Emerson Network Power, Xmark designed specifically for Zone 4 earthquake requirements.

We carry zone 4 racks manufactured by E- Systems, Knurr, , Synergy, Hoffman, Bline, Chatsworth, Xmark and others for Zone 4 data cabinet earthquake applications and zone 4 enclosure environments. These zone 4 racks or zone 4 enclosures are built out of 10 gauge steel and this steel welded Channel rack has been designed for the Bell System and has been tested and approved to Pacific Bell Static Seismic Test PBS-000-102PT.
Seismic Cabinets.

American Tech Supply carries a complete line of Zone 4 Newton relay racks which have been tested and certified as zone 4 relay rack and meets or exceeds other zone 4 relay racks. They are ideal for use in California, Colorado, or wherever a Zone 4, Zone 2 or Zone 2 is required. Excellent for use in all RBOC data centers, central offices and switching centers. We are an authorized CCR government reseller and also have affiliations with a certified MWBE/DV enterprise to meet your minority business requirements. Newton's products fulfill every application from the telephone closet to the network room to your co-location data center.We also have available E- Systems and Knurr - rack systems and racks for all your central office and data center needs.

MaxLoad® - Seismic Rack -Zone 4 Rated Data Cabinet- Heavy Load Rack

Part Number MIR 20207-Knurr Zone 4 Data Cabinet- Seismic Data Cabinet. The packing density of server and storage racks in computer centers continues to grow unremittingly.
This not only leads to new challenges with regard to thermal and cable management, but rather also demands especially high support capabilities for heavy loads for special applications.

• with fixed 19" installation on the front & rear for components in accordance with IEC 297-3
• Option of installing additional shelves and chassis rails
• Cable entry via top or bottom
• Heat loss exchange via perforated doors
• Door opening angle 180degrees
• Jumpering space Front 123 mm
• Load Rating -Static load 1000 KG
• Protection Rating IP 20

Tests

Material Finish

Knürr has once again put their innovative powerhouse to the test, and with the MaxLoad, have constructed a practical answer to the demand for a platform that meets the requirements of heavy duty loading of up to 1,000 kilograms (2204 pounds).
The required rigidity is achieved with an appropriately well-thought through, intelligent extrusion geometry. Numerous fixing points within the MaxLoad structure enable the highest level of flexibility possible with the rack equipping.

As solid as the design is, it nonetheless ensures sufficient space for good accessibility and truly advanced cable management.
In addition to its high loading capacity, the MaxLoad can also withstand stresses imposed in the event of an earthquake.
In accordance with the FEM Method, vibrations were simulated in Knürr test labs that guarantee earthquake stability of zone 4 with a load of up to 450 kilograms (992 pounds) in compliance with the Bellcore Standard!
The Knürr MaxLoad is a modular rack system that delivers stability for heavy load requirements and earthquake stresses and strains.

Freely accessible: Solid base fixing in accordance with Bellcore Standard.

High rigidity achieved with an intelligent extrusion geometry. Flexibility with installation provided by numerous fixing points. Designed for metric and 19” technology.

Solid construction quality plus accessibility for built-in units and generous cabling space.

The MaxLoad provides sufficient stability for applications in earthquake prone regions with seismic stresses ranging up to zone 4 (Bellcore Standard). In such applications, a rack loading of up to 450 kg (992 pounds) is possible.

Knurr Seismic Relay Rack

Call For Pricing & Specifications

Newton Zone 4 Racks- Newton Seismic Racks

SymRackTM
Newton Symmetric Equipment Rack
Get cabinet load capacity for an equipment rack price Sturdy 11 gauge (HSLA: High strength, low alloy) frame. Our revolutionary seismic equipment rack is Zone 4, Level 3 certified to hold a massive 875 lbs. *

Won’t damage cables
Innovative upright design provides protective barrier between equipment mounting screws and cable raceway.

No more plastic edge protectors
Uprights also have rounded edges, no more plastic edge protectors.

Reduces installation time
Pioneering cast-steel base allows leveling screws to be used in place of traditional shims. Fully open base design allows free access to anchor bolts.

Reduces required part numbers and inventory
The symmetric design makes each rack installable as open or closed duct (front or rear cable access), reducing required part numbers and inventory.

Supports both data and telco standard equipment
The symmetric design makes each rack installable as open or closed duct (front or rear cable access), reducing required part numbers and inventory.

Technical Specifications

* Tested in accordance to GR-63-CORE using steel plates to simulate equipment weight. It may be necessary to add stiffener panels in some equipment configurations.

CPI offers four series of products within the MegaFrame Family:

• Seismic Frame® Cabinet –  Zone 4 specifications with the features of the MegaFrame
  

Model # 11974Chatsworth Products Seismic Frame Cabinet System - Frame Only

Rated Zone 4 compliant to Bellcore GR-63-CORE for Network Equipment Building Systems (NEBS), Section 4.4.1.1, the Seismic Frame Cabinet System is able to withstand the seismic stress of an 8.3 Richter Scale earthquake.

Model # 11973Chatsworth Products Seismic Frame Cabinet System w/o Side Panels

Rated Zone 4 compliant to Bellcore GR-63-CORE for Network Equipment Building Systems (NEBS), Section 4.4.1.1, the Seismic Frame Cabinet System is able to withstand the seismic stress of an 8.3 Richter Scale earthquake.

Model # 11972 Chatsworth Products Seismic Frame Cabinet System

X-Mark XUS84-XL Ultra Server

X-Marks' XUS84-XL Ultra Server Exclusive Features

Footprint
24'' width x 36'' deep. The numerous cable top and bottom entry points let you configure your cabinet to your specific needs

19" Mounting
6mm mounting hardware
3 pair mounting uprights included

Cable Access Top
Rubber gland cable access, 14.25'' x 4'' Prevents dust from entering.

An optional model of the Ultra Server
has been Seismic Tested and Approved, and meets or exceeds Network Equipment Building System (NEBS) requirements for Earthquake Zone 4 conditions, Bellcore GR-063-CORE, Section 5.4.1 certification

The Zone 4 data cabinet or zone 4 Seismic Cabinet was extensively tested by an independent testing facility and passed with flying colors. It was subjected to static load test conditions and Zone 4 earthquake vibration test conditions in accordance with NEBS document TR-000063, Issue 4, 1992. There was no visible evidence of damage or deterioration to the cabinet as a result of the earthquake vibration test. The maximum displacement of the cabinet did not exceed the simple amplitude of 3 inches. More information as well as test results are available upon request.

American Tech Supply also carries a complete line of relay racks,ladder racks, data cabinets, raceway systems, distribution racks, cable management racks and enclosures for very application from the telephone closet to the network room to your co-location data center.We now have available Hendry rack systems and Newton racks for all you central office and data center needs. Call us today for a price quote at (866) 650-DATA. ATS , founded in 1992, has become a leading supplier of quality telecommunication equipment including computer cabinets, server racks, LAN work centers, printer stands, data cabinets, computer workstations, wire racks and KVM switches to IT centers. With offices located throughout the United States, we serve all regions of the United States and Canada. ATS specializes in providing quick solutions and quality products at discount prices that help organize and secure rackmount equipment.

American Tech Supply carries a complete line of Zone 4 Relay racks including ESW- (ESW), formerly Encore Products, Inc. Zone 4 Racks, Zone 4 Cabinets, Newton Zone 4 Racks & Zone 4 Data Cabinets, Hendry relay racks,ladder racks, data cabinets, raceway systems, distribution racks, cable management racks and enclosures for very application from the telephone closet to the network room to your co-location data center.

ESW's exclusive enclosure system, Magnitude VII, is built to withstand a 7.1 Richter Scale earthquake. It has earned the Network Equipment Building Systems (NEBS) Zone 4 Certificate of Compliance. In order to obtain this certification, it has to withstand extreme testing procedures without damage to its frame. Thus, during a severe environmental disaster, vital equipment will not be damaged or destroyed. The Mag VII is capable of holding up to 700 lbs. of distributed weight.

The Mag VII door has bullet hinges that will withstand seismic shaking. They also enable the door to open 180 degrees for trouble-free access.

Because of the stringency of this compliance certification, customization of the Mag VII is limited. Standard color selection and sizing options are still available

We Now Carry Xmark & Newton, E-Systems Data Cabinets, Racks and Accessories

We also have standard data cabinets (models ATS4232F ATS4240F ATS2740F ATS2732F) that can ship same day! Call us today at (866) 342-3721 for more info- or click on this link for more info on our same day data cabinet shipping. We carry data cabinets from several manufacturers that allow upis high on fine styling and value-for-money features. It has been designed and engineered specifically for easy assembly and rapid equipment integration at site.

Its innovative design is based on the use of aluminum profiles for the four vertical pillars, which are connected solidly to two welded steel end-frames. This results not only in low weight and an elegant appearance, but also permits quick assembly. Due to the rigidity provided by the steel end-frames, our data cabinet is able to handle equipment loads of up to 770 to 1500 lbs. This means it an ideal choice for mid-range use as a Server enclosure, or for network cabling purposes.

These zone 4 racks and zone 4 enclosures are designed for maximum protection for very application from the telephone closet to the network room to your co-location data center. Call us today for a price quote at (866) 650-DATA.

We Now Carry Knurr- E- Systems -XmarkZone 4 Racks & Zone 4 Enclosures

We are Updating Our Website- Please Call Us Your Hendry Part Number and We WIll Provide You With An Immediate Quote

Call Us Today Tollfree At (866) 342-3721 or (866) 650-DATA

Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives