Adtran
DSLAMS- OSP DSLAMS
Total
Access 1100 Series of OSP DSLAMs
The
Total Access 1100 Series of OSP DSLAMs operate in environments beyond loop constraints
and expensive enclosures. Housed in a compact, weather-tight case, the Total Access
1100 OSP DSLAMs can be powered across the loop and mounted just about anywhere
pole, pedestal, cross-box. remote terminal or other challenging locations.
Providing 24 ADSL ports and integrated splitters, these OSP DSLAMs bring DSL to
all your subscribers in a cost-effective package.
The
Total Access 1100 OSP DSLAMs use four DS1 IMA interfaces for 6 Mbps of access
toward the network. DS1 IMA is not only cost-effective using well-established
DS1 technology, but robust as well. IMA accommodates DS1 circuit failures by adapting
the network connection through the remaining operational DS1 circuits.
The
Total Access 1100 OSP DSLAMs can be remotely provisioned and managed using the
Total Access Element Management System (EMS), TL1, Telnet and SNMP. Troubleshooting,
maintenance, and administrative tasks can be performed without the need for dispatch.
Total
Access 1124 Line Powered OSP DSLAM Fit-Anywhere OSP DSLAM
Total Access 1124
Line Powered OSP DSLAM with 1 T1 ATM Network Uplink Fit-Anywhere OSP DSLAM
Total Access 1124 Line Powered OSP DSLAM with 4 T1 IMA Network Uplink Fit-Anywhere
OSP DSLAM
Total Access 1124 Line Powered Quad IMA OSP DSLAM Fit-Anywhere
OSP DSLAM
Total Access 1124 Local Powered OSP DSLAM Fit-Anywhere OSP DSLAM
Total Access 1124 Local Powered OSP DSLAM with 1 T1 ATM Network Uplink Fit-Anywhere
OSP DSLAM
Total Access 1124 Local Powered OSP DSLAM with 4 T1 IMA Network
Uplink Fit-Anywhere OSP DSLAM
Total Access 1124 Local Powered Quad IMA OSP
DSLAM Fit-Anywhere OSP
Total
Access 1200 Series of Mini-DSLAMs
The
Total Access 1200 Series of Mini-DSLAMs were designed with service providers in
mind. Whether your network is IP or ATM, ADTRAN provides a DSL solution that delivers
broadband simply and reliably to your valued customers.
The
Total Access 1200 DSLAMs measure just 1U x 17.25 in. x 11.125 in., so they will
easily fit in existing Remote Terminals. Equipped with integrated splitters, the
Total Access 1200 Series of Mini-DSLAMs are sized to accommodate typical line
counts and take rates, offering optimum performance for your investment dollars.
With NEBS Level 3 compliance and a temperature-hardened design, the Total Access
1200 DSLAMs are a good fit for the Central Office, Outside Plant, or Customer
Premises applications.
The
Total Access 1200 Mini-DSLAMs easily scale from one to four units utilizing a
common network interface. The modular network provides 10/100BaseT Ethernet or
a variety of ATM-based modules to allow migration options that meet the ever-increasing
need for additional bandwidth, including IMA, DS3 and OC-3c interfaces.
Multi
Service Access
VoIP
Channel Banks
T1/E1
Electrical-to-Optical Converters
Frame
Relay
Integrated Access
Mini DCS
Multiplexers
FTTH
Battery
Backup
Layer
2 Switches ------Multi-
Layer Switches