Other Products
     About Us

?2001 American Tech Supply

ICC Finger Duct- Vertical Cable Finger Duct-Horizontal Finger Duct- Cable Management Finger Duct Panels- ICC Vertical Finger Duct

Save $$ on Vertical Cable Duct

Vertical Finger Duct

 

Horizontal Finger Duct

This vertical finger duct is sure to give your installation a clean and finished look. The base material of the duct is 2 mm aluminum that is painted in black electrostatic microfinish. The cover and ducts that support the cables are made of PVC that can hold up to 50 or 70 cables. The cable duct comes in either a height of 4', 6', or 7'.

This vertical finger duct is sure to give your installation a clean and finished look. The base material of the duct is 2 mm aluminum that is painted in black electrostatic microfinish. The cover and ducts that support the cables are made of PVC that can hold up to 50 or 70 cables. The cable duct comes in either a height of 4', 6', or 7'.

Quest Manufacturing HF19-02-XX0 - 2 RU Horizontal Finger Duct with Cover

If your installation needs to be cleaned up than this covered finger duct is exactly what you are looking for. The cold rolled steel 18 AWG is... (See Full Description)
OUR PRICE: $39.00 (Varies with options)
Original Price: $45.00
You Save: $6.00 (13%)

If your installation needs to be cleaned up than this covered finger duct is exactly what you are looking for. The cold rolled steel 18 AWG is painted with black electrostatic microfinish with a cover and ducts made out of PVC. The 2 RU finger duct comes in either a capacity of either 190 or 200 cables.

Vertical Finger Duct

ATS carries a complete line of vertical finger duct and horizontal finger duct at a fraction of the cost of the national distributors. So why pay more? You can buy the$ 80.00 finger duct you buy at the national chains for less than $40.00 plus shipping.
Our ICC Finger duct panels and cable management finger duct panels are compatible with all relay racks and wall mount brackets and these ICC's finger ducts are used for general purpose control panel wiring and to route and protect wiring in communication closets. The non-slip cover conceals all wiring and is easy to install. The duct and cover form a flush sidewall providing increased capacity and improved aesthetics. Slotted ducts allow horizontally routed cable and patch cords to be placed vertically to designated ports along the width of the rack. Panels include a cover to conceal cables.

HORIZONTAL FINGER DUCT-HORIZONTAL CABLE MANAGEMENT DUCT

ICCMSCMA41- Horizontal Finger Duct

ICCMSCMA41 Finger Ducts on Front, 1 RMS The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws.

ICCMSCMA42- Horizontal Finger Duct

The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws

ICCMSCMA42 Finger Ducts on Front, 2 RMS

ICCMSCMA61- Horizontal Finger Duct

ICCMSCMA61 Finger Ducts on Front & Rear, 1 RM

The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.

ICCSMSCMA62- Horizontal Finger Duct

ICCMSCMA62 Finger Ducts on Front & Rear, 2 RMS The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.

Price $ 52.26 Call For additional discounts (866) 650-DATA

Our ICC Finger duct panels are compatible with most racks and wall mount brackets and ICC's finger ducts are used for general purpose control panel wiring and to route and protect wiring in communication closets. The non-slip cover conceals all wiring and is easy to install. The duct and cover form a flush sidewall providing increased capacity and improved aesthetics. Slotted ducts allow horizontally routed cable and patch cords to be placed vertically to designated ports along the width of the rack. Panels include a cover to conceal cables. Configurations are available for front and front & rear cable management. Package includes 12-24 x 5/8 inch pilot point rack screws, for use with distribution racks.

ITEM NUMBER DESCRIPTION
MSCMA41 Finger Ducts on Front, 1 RMS
MSCMA42 Finger Ducts on Front, 2 RMS
MSCMA61 Finger Ducts on Front & Rear, 1 RMS
MSCMA62 Finger Ducts on Front & Rear, 2 RMS

RMS = Rack Mount Space, 1.75 Inches

Specifications

Made of rigid PVC
• UL Recognized continuous use temperature: 50 °C (122°F)
• UL94 Flammability Rating of V-0
• Provided with mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement for flame retardant material

Features & Benefits
• Wide finger/slot design provides greater sidewall rigidity and can be used with a wide range of wire bundle sizes
• Rounded edges protects hands and wiring/cabling from abrasion
• Non-slip cover stays in place during shipment, vibration and when in vertical orientation, eliminating rework
• Flush cover design holds 5% more wires than traditional duct designs
• Double scoreline allows quick modification for larger cabling bundles saving installation time leading to a lower installed cost
• Specially formulated lead-free material eliminates health concerns associated with PVC that contains lead

• Restricted slot design retains wire in slot for fast, easy wire installation or removal

ICC Vertical Finger Duct- Vertical Cable Management Ducts

Part No.: ICCMSCMA12

PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3

3x3 Dual Vertical Finger Duct Panel

 

ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.

Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct

ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.

PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5
4x5 Dual Vertical Finger Duct Panel

Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct

VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT)

78" ht., 4"x5" slotted, front, center mount design

ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.

Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct
PANEL, VERTICAL FINGER DUCT, 35 , 3X3

3x3 Vertical Finger Duct Panel
6

ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes ?easy to remove? covers to help facilitate installation.

Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct

ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.

PANEL, VERTICAL FINGER DUCT, 35 , 4X5
4x5 Vertical Finger Duct Panel

ICC's Dual Vertical Finger Duct Panels (side-mount) are deigned to compliment the ICC 7' and 4' Distribution rack.  The panels are 4"x 5"x 35" high and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help keep cables organize and neat appearance.

PANEL,VERT FGR DUCT, DBL SIDE MT 4X5X35"
 
 
4X5X35", DBL SIDE MT, VERT FGR DUCT
Part No.: ICCMSCMA23

ICC's Vertical Cable Channel is designed with aluminum construction, black textured powder coated finish, light weight and sturdy, measures 6" W x 5" D x 6.5'H. And fits on the sides of individual racks but can also be used to join two 2-Post & 4-Post Racks. The Vertical Cable Channel has front swivel latches, sides and rear cable/velcro tie points, large rear openings for quick and easy cable routing and can also be mounted back to back to provide true cable management flexibility. This product is a perfect solution for moves, adds, changes of your cabling and ideal for a full length vertical cable pathway and will have the aesthetic finish of an organized distribution racks.

CABLE CHANNEL, VERTICAL BLACK, 6.5FT

 

 

vertical cable channel
Part No.: ICCMSCC6BK

ICC's 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes sanp-on cover to help facilitate installation.

VERTICAL FINGER DUCT 78" FRONT ONLY (SIDE-MOUNT)

 

 

78" ht., 4"x5" slotted, front, side mount design

Part No.: ICCMSCMA81

ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation

VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT)
 
 

78" ht., 4"x5" slotted, front, center mount design

Part No.: ICCMSCMA82

 

ICC's Dual Vertical Finger Duct Panels (side-mount) are designed to compliment the ICC 7' Distribution rack.  The panels are 4"x 5"x78" high and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.

PANEL,VERT FGR DUCT, DBL SIDE MT 4X5X78"
 
 
Part No.: ICCMSCMA83

Cover is designed to fit on the front of the cable channel to provide a neat, clean and well-organized appearance.

CABLE CHANNEL, COVER, BLACK, 3 FT
Channel Cover
Part No.: ICCMSCCVBK

Part No.: ICCMSCMA12

PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3

3x3 Dual Vertical Finger Duct Panel

Closeout Pricing Available  Call ICC

ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.

Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct

ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.

Slotted Finger ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws.

 

PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5
4x5 Dual Vertical Finger Duct Panel

Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct

VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT)

78" ht., 4"x5" slotted, front, center mount design

ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.

Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct
PANEL, VERTICAL FINGER DUCT, 35 , 3X3

3x3 Vertical Finger Duct Panel

ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes "easy to remove" covers to help facilitate installation.

Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct

ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.

PANEL, VERTICAL FINGER DUCT, 35 , 4X5
4x5 Vertical Finger Duct Panel

The 1 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws

HORIZONTAL FINGER DUCT FRONT 1RMS
 
 

Panel, Horizontal, Front, 24-SLOTS, 1RMS

Part No.: ICCMSCMA41

The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws

HORIZONTAL FINGER DUCT FRONT 2RMS
 
 
Panel, Horizontal, Front, 24-Slots, 2RMS
Part No.: ICCMSCMA42

The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front of a rack. Includes #12 mounting screws

HORIZONTAL FINGER DUCT FRONT/BACK 1 RMS
 
 
Panel, Horizontal, Front/Back, 24-SLOTS, 1RMS
Part No.: ICCMSCMA61

ICCSMSCMA62- Horizontal Finger Duct

ICCMSCMA62 Finger Ducts on Front & Rear, 2 RMS The 2 RMS finger duct panel features 24 slotted ducts designed to provide horizontal cable management on the front and back of a rack. Includes #12 mounting screws.

Price $ 52.26 Call For additional discounts (866) 650-DATA

Our ICC Finger duct panels are compatible with most racks and wall mount brackets and ICC's finger ducts are used for general purpose control panel wiring and to route and protect wiring in communication closets. The non-slip cover conceals all wiring and is easy to install. The duct and cover form a flush sidewall providing increased capacity and improved aesthetics. Slotted ducts allow horizontally routed cable and patch cords to be placed vertically to designated ports along the width of the rack. Panels include a cover to conceal cables. Configurations are available for front and front & rear cable management. Package includes 12-24 x 5/8 inch pilot point rack screws, for use with distribution racks.


ITEM NUMBER DESCRIPTION
MSCMA41 Finger Ducts on Front, 1 RMS
MSCMA42 Finger Ducts on Front, 2 RMS
MSCMA61 Finger Ducts on Front & Rear, 1 RMS
MSCMA62 Finger Ducts on Front & Rear, 2 RMS


RMS = Rack Mount Space, 1.75 Inches


Specifications

Made of rigid PVC
• UL Recognized continuous use temperature: 50 °C (122°F)
• UL94 Flammability Rating of V-0
• Provided with mounting holes
• Conforms with NFPA 79-2002 section 14.3.1 requirement for flame retardant material

Features & Benefits
• Wide finger/slot design provides greater sidewall rigidity and can be used with a wide range of wire bundle sizes
• Rounded edges protects hands and wiring/cabling from abrasion
• Non-slip cover stays in place during shipment, vibration and when in vertical orientation, eliminating rework
• Flush cover design holds 5% more wires than traditional duct designs
• Double scoreline allows quick modification for larger cabling bundles saving installation time leading to a lower installed cost
• Specially formulated lead-free material eliminates health concerns associated with PVC that contains lead

• Restricted slot design retains wire in slot for fast, easy wire installation or removal

Vertical Finger Duct- Vertical Cable Management Ducts

Part No.: ICCMSCMA12-

PANEL, VERT FINGER DUCT, DBL, 35 H, 3X3

3x3 Dual Vertical Finger Duct Panel

 

ICC's Dual 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.

Part No.: ICCMSCMA22-Vertical Fiber Duct- Vertical Cable Management Duct

ICC's Dual 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers to help facilitate installation.

PANEL, VERT FINGER DUCT, DBL, 35 H, 4X5
4x5 Dual Vertical Finger Duct Panel

Part No.: ICCMSCMA82-Vertical Fiber Duct- Vertical Cable Management Duct

VERT FINGER DUCT FRONT/BACK 78" (CENTER MOUNT)

78" ht., 4"x5" slotted, front, center mount design

ICC's Dual 4x5 Vertical Finger Duct Panel comes 78 in height and provides vertical cable management for the front and back of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on cover to help facilitate installation.

 

Part No.: ICCMSCMA11-Vertical Fiber Duct- Vertical Cable Management Duct

PANEL, VERTICAL FINGER DUCT, 35 , 3X3

3x3 Vertical Finger Duct Panel

ICC's 3x3 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes ?easy to remove? covers to help facilitate installation.

Part No.: ICCMSCMA21-Vertical Fiber Duct- Vertical Cable Management Duct

ICC's 4x5 Vertical Finger Duct Panel comes 35 in height and provides vertical cable management for the front of the rack. It comes complete with mounting brackets and screws. Package also includes snap-on covers.

PANEL, VERTICAL FINGER DUCT, 35 , 4X5
4x5 Vertical Finger Duct Panel

 

Home | Cables | Switches | Contact Us | Our Team | Locations

 

 

 

 

 

Data Cabinets

2 Post-4 Post Racks

Rack Mount Shelves

Raceway

Cable Management

MPO Cassettes

MTP Fiber Cassettes

Fiber Optic Assemblies-Fiber Optic Jumpers

Fiber Optic Enclosures