Century Rack Mount Fiber Optic Enclosures,Rack Mount Fiber Optic Enclosures, Rack Mount Fiber Optic Patch Panels, Wholesale Fiber Optic Enclosures

Fiber Optic Enclosures-Fiber Optic Patch Panels- Wall Mount Fiber Optic Patch Panels- 24 Port Fiber Optic Patch Panels-Indoor Fiber Optic Patch Panels - 48 Port Fiber Optic Patch Panels-72 Port Fiber Optic Patch Panels- 144 Port Patch Panels- Rack Mount Fiber Optic Patch Panels- Fiber Optic Frames- Fiber Optic Main Distribution Frame -Network Bays- Open Bay Frame Systems]

American Tech Supply carries a complete line ofCentury Rack Mount Fiber Optic Enclosures,Rack Mount Fiber Optic Enclosures, Rack Mount Fiber Optic Patch Panels, Wholesale Fiber Optic Enclosures that are compatible with the Corning Fiber Optic Enclosure Line of products including our Corning (compatible) fiber optic patch panels, outdoor fiber optic enclosures,wallmount fiber optic panels and rackmount fiber optic patch panel fiber optic enclosures which are designed for direct termination of up to 144 fibers. We carry a full line of fiber optic enclosures and fiber optic patch panels from ICC, Signamax, Century, Emerson-Fiberconn, Fiber Connections, Corning, Telect, Superior , ADC and others.The RAC series patch panel accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. We also offer a large variety of fiber optic connector adapters that are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management. Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management.

See our partial inventory of fiber optic enclosures below- we have listed Corning, Corning compatible, and Signamax fiber optic enclosures. We also specialize in custom fiber optic enclosures- call us or more information at (866) 342-3721 for all you fiber optic patch panel and fiber optic enclosure needs. Remember- we meet or beat all USA Based Pricing!

West Coast (866) 342-3721-------East Coast (866) 650-DATA

New Telect Fiber Optic Enclosure-click here

Century RackMount

Century Wallmount Enclosures

Century OutsidePlant Enclosures

Accessories

Part Number ATSFISR-12/Fisr-12

The 1U rack mount fiberoptic splice and termination cabinets from Century provide an economical solution for small installations where direct termination or pigtail splicing is required. These compact, durable, easy to install cabinets offer front and rear access and secure cable management. Typical uses of these cabinets include situations where outside plant cables are terminated onto the back of the connector panel or where pigtails are spliced onto the incoming cable.

Mounts in 19” and 23” racks
Flush mount or standard 5.25” projection
1 rack-unit high
Front access to all operations on a swing out shelf
Accommodates splice trays
Accepts standard adapter 6-pack panels
16 Gauge CRS construction
Durable powder coat finish in beige or optional black
Accessory Kit included with
Cable ties
Cable management clips
Labels
Splice tray mounting kit
Rack mounting screws
Installation Instructions
1.75” h X 17” w X 15” d
Also available with pre-terminated stub cables up to 200 feet long
Description
The 1U rack mount fiberoptic splice and termination cabinets from Century provide an economical solution for small installations where direct termination or pigtail splicing is required. These compact, durable, easy to install cabinets offer front and rear access and secure cable management. Typical uses of these cabinets include situations where outside plant cables are terminated onto the back of the connector panel or where pigtails are spliced onto the incoming cable.

Part Number ATSFTS-350-S/TMPart Number ATSFTS-350-TM

Description
The FTS-350 rack-mount cabinet accommodates up to 36 direct or spliced terminations. The six-pack panels are available in all common connector styles, either empty or loaded with Century Fiberoptics adapters.

As with all of our cabinets, the FTS-350 is also available with preterminated cable stub or pigtails. Our factory terminations ensure the best possible field performance.

Cable entrance is from the top and back of the cabinet. Cable mounting is easy, fast and secure.

Mounts in 19” and 23” racks
Flush mount or standard 5.25” projection
Splice and terminate up to 36 fibers
Two rack-unit high
Removable Top and Rear cover
Optional locking front door in steel or acrylic
Front access via slide-out tray
Accommodates up to three splice trays
Accepts standard adapter 6-pack panels
16 Gauge CRS construction
Durable powder coat finish in beige or optional black
Accessory Kit included with
Cable ties
Cable management clips
Labels
Splice tray mounting kit
Rack mounting screws
Installation Instructions
3.5” h X 17” w X 12” d

Part Number ATSFTS-525-TM
The FTS-525 Series of 3U high rack-mounted fiber splice and termination cabinets from Century Fiberoptics are compact, durable and easy to assemble. Designed for maximum flexibility, the series includes variety of functional options and accessories. The units are easily configured to meet termination, interconnection or crossconnection requirements. The FTS-525 cabinets can be used on frames with either front or back access and will accept cables from the front, rear, top or bottom. Access to the front is through the removable hinged door. A removable back cover provides rear access. An optional lock is available for the front door. The cabinets can be configured for splicing only, termination only, or a combination of both. Flexible design allows mixing of connector types and the installation of only the adapters needed for the current application. Adapter panels accommodate ST, SC, FC, LX.5, LC, E2000, and other adapter types

Features
19” and 23” rack mounting
Stackable
Top and bottom cable entry
Accommodates fiber splice trays
Cable storage plates included
Fiber Management Kit, including tie wraps, clips, labels and rack-mounting screws
Accepts standard up to 12 6-pack adapter panels (72 terminations) or up to 6 splice trays (72 fiber splices)
16 gauge CRS construction
Durable powder coat finish in beige or optional black
5.25” h X 17” w X 12” d

The FTS-700 Series of 4U high rack-mounted fiber splice and termination cabinets from Century Fiberoptics are slightly larger than the FTS-525 cabinets, with a bit more “working space” in the back for the technician. The extra rack unit also increases the capacity of the cabinet when used in the Splice and Terminate configuration. Designed for maximum flexibility, the series includes variety of functional options and accessories. The units are easily configured to meet termination, interconnection or cross-connection requirements. The FTS-700 cabinets can be used on frames with either front or back access and will accept cables from the front, rear, top or bottom. Access to the front is through the removable hinged door. A removable back cover provides rear access. An optional lock is available for the front door. The cabinets can be configured for splicing only, termination only, or a combination of both. Flexible design allows mixing of connector types and the installation of only the adapters needed for the current application. Adapter panels accommodate ST, SC, FC, LX.5, LC, E2000, and other adapter types.

19” and 23” rack mounting
Stackable
Top and bottom cable entry
Accommodates fiber splice trays
Cable storage plates included
Fiber Management Kit, including tie wraps, clips, labels and rack-mounting screws
Accepts standard up to 12 6-pack adapter panels (72 terminations) or up to 6 splice trays (72 fiber splices)
16 gauge CRS construction
Durable powder coat finish in beige or optional black
7” h X 17” w X 12” d

The FTS-105 Series of 5U high rack-mounted fiber splice and termination cabinets from Century Fiberoptics are our largest rackmount units. They offer high capacity with the same ease of use as our smaller units. Designed for maximum flexibility, the series includes variety of functional options and accessories. The units are easily configured to meet termination, interconnection or cross-connection requirements. The FTS-105 cabinets can be used on frames with either front or back access and will accept cables from the front, rear, top or bottom. Access to the front is through the removable hinged door. A removable back cover provides rear access. An optional lock is available for the front door. The cabinets can be configured for splicing only, termination only, or a combination of both. Flexible design allows mixing of connector types and the installation of only the adapters needed for the current application. Adapter panels accommodate ST, SC, FC, LX.5, LC, E2000, and other adapter types.

Features

19” and 23” rack mounting
Stackable
Top and bottom cable entry
Accommodates fiber splice trays
Cable storage plates included
Fiber Management Kit, including tie wraps, clips, labels and rack-mounting screws
Accepts standard up to 24 6-pack adapter panels (144 terminations) or up to 12 splice trays (144 fiber splices)
Up to 72 fibers in Splice/Termination configuration
16 gauge CRS construction
Durable powder coat finish in beige or optional black
10.5” h X 17” w X 12” d

Part #'s ATSCMP-4U & CMP-2U
The CMP Series of cable management panels provide simple, organized routing for horizontal and vertical arrangement of patch cables on a 19” rack. Use them between Century Fiberoptics’s rackmounted cabinets to prevent tangled cables.

Steel construction
Durable powder coat finish
Hinged removable front cover
Available in 2U and 4U versions

Accessories:

The FPPS Series of patch panels from Century Fiberoptics provides an economical patching system for use in enclosed equipment bays or open racks when security is not required.

Many configurations are available. The FPPS-12-ST and FPPS-24-ST are pre-punched panels that will accept ST or FC adapters. Pre-punched versions are also available for LC (up to 96 ports), and SC duplex (up to 48 ports). The FPPS-72 utilizes 6-pack adapter panels with any type adapter. The FPPS-72 also features a swing-out feature for access from the front of the panel.

Models

FPPS-12-ST
FPPS-24-ST
FPPS-72
FPPS-24SCD
FPPS-48SCD
FPPS-96LC

Call Us Today For A Quote at (866) FIBER-21

Don't Gamble With Quality- Buy American

or visit this link for sample pricing Click Here For Fiber Optic Assembly Pricing

home | cables | switches | Contact Us our team | locations

cable, vdsl, patch