Fiber Optic Converter-Singlemode
Converters- Multimode Converters-
WDM's- Wave Division Multiplexer-Fiber Optic Repeater- Fiber Optic
Transceivers- Fiber Optic Multiplexers- Ethernet Media Converters-
Telephone Extenders-Fiber Optic Media Converters- DOUBLE
YOUR FIBER CAPACITY
American Owned
and Operated
ATEK carries a complete line of fiber optic transmission
products including fiber optic modems, fiber optic transceivers,
fiber optic media converters, T1/E1 fiber optic modems, T3/E3 fiber
optic modems and multiplexers, from several different manufacturers
including Allied Telesyn, CXR, Canoga Perking, Versitron, TCC, Telco
Systems, and others. Our General products include Fiber Optic Modems
& Multiplexers; Fiber Optic Data/Telephone Multiplexers; Fiber
Ethernet Switches, Transceivers & Media Converters and Ethernet/Fiber/RS-232
Telephone Extenders. The MAXI fiber optic converter will convert
or repeat all popular wavelengths including 850nm, 1300nm or 1550nm
over single mode or multimode fiber optic cable. It is compatible
with most communication technologies including Ethernet, Token Ring,
TAXI, OC1/OC3, ATM, FDDI and SONET.
Rack Mount Version
"Maxi"
Fiber Optic Mode Converter/Repeater
(Model TC3005) Prices Start at $995.00 ea.
*
Data Rates up to 200 Mbps
* Distances up to 100km
* Local & Remote Loopback
* Local Dry Contact Alarm Relay
* Test Signal Generator
* 8 Diagnostic LED Indicators
* Built-In Audible Alarm Buzzer
* Built-In Redundant Power Supply
* Standalone or Rackmount (Interchangeable)
Applications
The
MAXI Mode Converter is used to convert multimode to single mode,
or visa versa, in a variety of LAN and Telephony communication environments
including PABX, Ethernet, Token Ring, FDDI, ATM & SONET (OC1
& OC3). This conversion is done to cross-connect different fiber
types, regenerate optical signals and/or extend transmission distances.
![](TC3005appdiagram.gif)
Description
The
TC3005 "MAXI" Multimode-to-Single Mode Fiber Optic Converter
converts multimode formats to single mode formats, or vice versa,
for data transmission up to 200 Mbps. Transmission distances to
more than 100km are possible with the Laser 1550nm option (34dB
loss budget).
The
MAXI will convert or repeat all popular wavelengths including 850nm,
1300nm or 1550nm over single mode or multimode fiber optic cable.
It is compatible with most communication technologies including
Ethernet, Token Ring, TAXI, OC1/OC3, ATM, FDDI and SONET.
The
MAXI provides users with several key features including Local &
Remote Loopback, a Test Signal Generator, Dry Contact Relay Alarm,
Audible Alarm Buzzer, Power Redundancy, and standalone or rackmount
modularity.
The
Test Signal Generator and Dry Contact Alarm are particularly beneficial.
The Signal Generator (160 Mbps) helps technicians conduct various
installation tests including fiber link verifications. The Dry Contact
Alarm Relay, which includes an audible alarm buzzer, identifies
Optical Signal Loss on either the multimode or single mode ends.
Power
redundancy is load sharing and switches over automatically in the
event of a failure. Power can be either 12VDC (standard), 24VDC,
-48VDC, or 115/230VAC with an external power cube. Standalone versions
are modular, i.e. used either in a standalone case or in a Rack
Mount assembly. Standard connectors are ST or FC type.
Four
DIP switches and eight LED indicators are provided to help installation
and troubleshooting. An extreme temperature version (-20° to
70°C), Model TC3005T, is also available.
Combination
WDM & Fiber Optic Mode Converter/Repeater
(Model TC3007) Prices Start at $,1895 ea.
*
Doubles Existing Fiber Cable Capacity
* Converts Multimode to Single Mode (or Single Mode Repeater)
* Data Rates up to 200 Mbps
* Distances up to 50km
* Local Dry Contact Alarm Relay
* Test Signal Generator & 8 Indicators
* Local & Remote Loopback
* Built-In Audible Alarm Buzzer
* Built-In Redundant Power Supply
* Standalone or Rackmount (Interchangeable)
Applications
Because
of its multiplexing capability, the TC3007 is often used to increase
existing fiber optic cable capacity in LAN or Telephony environments
that require connecting different fiber types or wavelengths, regenerating
optical signals and/or extending transmission distances. Typical
environments include PABX, Ethernet, Fast Ethernet, Token Ring,
FDDI, ATM and SONET (OC1 & OC3).
Description
The
TC3007 Multimode-to-Single Mode Fiber Optic Converter converts multimode
formats to single mode formats, or vice versa, for data transmission
up to 200 Mbps. Transmission distances to more than 50 km are possible
with the Laser 1300nm option (25dB loss budget).
The
TC3007 functions both as a Fiber Optic Mode Converter/Repeater and
a 2-Channel Wave Division Multiplexer. This benefits users by effectively
doubling existing fiber cable capacity in addition to its mode conversion/repeater
functions.
The
TC3007 will convert or repeat all popular wavelengths including
850nm, 1300nm or 1550nm. It is compatible with most communication
technologies including Ethernet, Fast Ethernet, Token Ring, TAXI,
OC1/OC3, ATM, FDDI and SONET. It is completely transparent to incoming
data and protocols.
The
TC3007 provides users with several key features including Local/Remote
Loopback, Test Signal Generator, Dry Contact Alarm, Audible Alarm
Buzzer, Power Redundancy, and Standalone or Rack Mount modularity.
The
Test Signal Generator and Dry Contact Alarm are particularly beneficial.
The Signal Generator (160Mbps) helps technicians conduct various
installation tests including fiber link verifications. The Dry Contact
Alarm, which includes an audible alarm buzzer, identifies Optical
Signal Loss on either the multimode or single mode ends.
Power redundancy is load sharing and switches over automatically
in the event of a failure. Power can be either 12VDC, 24VDC, -48VDC,
115/230VAC. Standalone versions are modular, i.e. used either in
a standalone case or in a rack mount assembly. Standard connectors
are ST or FC type. An extreme temperature version (-20° to 70°C),
Model TC3007T, is also available.
A
terminal block connector on the rear panel provides for the dry
contact relay alarm. Normally in the OPEN position, any loss of
electrical or optical signal will trigger an alarm condition and
force the switch to the CLOSED position. This relay can be used
in conjunction with an external device to monitor the condition
of the link.
![](TC3007appdiagram.gif)
Rack Mount
Version
Low
Speed Fiber Optic Mode Converter
(Model TC3020) Prices Start at $1,295.00 ea.
* Supports Burst Data
* Data Rates up to 5 Mbps
* Distances up to 30km*
* Multimode & Single Mode (850/1300/1550nm)
* Multiple Diagnostic LED Indicators
* Test Signal Generator
* Built-In Loopback Functions
* Local Dry Contact Alarm Relay
* Stand Alone or Rackmount
Applications
The
TC3020 Mode Converter is frequently used to convert multimode to
single mode, or vice versa, for various low speed devices in SCADA,
Automation and Process Control communication environments. It is
also used for Burst Data applications. This conversion is done to
cross-connect different fiber types, regenerate optical signals
and/or extend transmission distance.
Description
Intended
for low speed and Burst Data applications, the TC3020 Multimode-to-Single
Mode Fiber Optic Converter converts multimode formats to single
mode formats, or vice versa, for data transmission up to 5 Mbps.
The
TC3020 is also used to regenerate or extend optical signals. It
will convert, regenerate or extend 850nm, 1300nm or 1550nm wavelengths
up to distances of 30 km*.
Eleven
LEDs are provided for diagnostics, monitoring optic signals in both
directions and indicating system status. A Test Signal Generator
is available to help technicians conduct various installation tests
including fiber link verifications. A Dry Contact Relay Alarm is
also provided as a standard feature.
The
TC3020 works with all popular types and sizes of fiber optic cable.
Fiber optic connectors are ST or FC type. Power is 12VDC or 115/230VAC
with an external power cube. The TC3020S is a Standalone Unit. The
TC3020R is the Rackmount Card Unit that requires TCRM192 or TCRM196
Rackmount Card Cages. An extreme temperature version (-20°C
to 70°C), Model TC3020T, is also available.
A
terminal block connector on the rear panel provides for the dry
contact relay alarm. Normally in the OPEN position, any loss of
electrical or optical signal will trigger an alarm condition and
force the switch to the CLOSED position. This relay can be used
in conjunction with an external device to monitor the condition
of the link.
*Contact factory for higher requirements.
![](TC3020Sappdiagram.gif)
![](metrosplash.jpg)
Call (866) FIBER -21
|