Fiber
Optic Modems-T1/E1
Fiber Optic Modems- T3/ E3 Fiber Optic Modems- Async/Sync Fiber
Optic Modems- Fiber Optic Transceivers- Fiber Optic Multiplexers-
Ethernet Media Converters- Telephone Extenders-Fiber Optic Media
Converters
American
Tech Supply carries a complete line of fiber optic modems from several
different manufacturers.Data, Voice, Ethernet, T1/E1, T3/E3 &
Audio for campus & intra-building fiber optic networks. General
products include Fiber Optic Modems & Multiplexers; Fiber Optic
Data/Telephone Multiplexers; Fiber Ethernet Switches, Transceivers
& Media Converters and Ethernet/Fiber/RS-232 Telephone Extenders.
Specialty products include Industrial-Hardened Ethernet and Multi-Drop
Fiber Modems & Multiplexers for SCADA, Traffic Control, Security
& Process Control applications.
Fiber Optic Modems are often used to link various process control
systems in manufacturing plants, refineries, etc. It is also used
to connect Remote Terminal Units to SCADA hosts or controllers in
Utility environments.
Multi-Interface Sync/Async Fiber Optic Modems
(Model TC1705) Prices Start at $695.00 ea.
TC1705R Rackmount Cards
(Housed in TCRM192 Rackmount Card Cage)
Applications
The TC1705 Multi-Interface Fiber Optic Modem is intended
for applications requiring high data rates and handshaking.
The TC1705 is the ultimate "configure-it-as-you-need-it"
fiber optic modem. Ideal for applications requiring multiple interfaces,
high data rates or full handshaking, it supports synchronous and
asynchronous data rates up to 256Kbps.It supports most popular electrical
interfaces including RS-232, RS-422, RS-485 (2-wire or 4-wire),
RS-530, V.35 and TTL. Electrical interfaces are modular and can
be easily changed before or after installation.
Distances up to 80km* are possible
depending on various factors including electrical interface, optical
transmitter, number of fiber optic connectors and fiber type and
quality. Power redundancy is standard. Optical redundancy is optional.Diagnostics
are extensive and include a built-in Test Signal Generator, local
& remote loopback tests and LEDs for Power, Alarm, Tx, Rx and
all applicable control signals. The Test Signal Generator verifies
both device and fiber optic link operation. Available for multimode
(850/1300nm) or single mode (1300/1550nm), the TC1705 is compatible
with all popular sizes and types of fiber optic cable. Fiber optic
connectors are ST or FC. Electrical connectors are DB25 female.
Power is standard 12VDC, optional 24VDC, -48VDC, 125VDC or 115/230VAC
with an external power cube.
The TC1705 is available in two versions:
TC1705R Rackmount Card for installation in a 19" rack assembly
(TCRM192 or TCRM196) or TC1705S Standalone version. Standalone or
rackmount versions can be mixed or matched on either end. There
are two optional versions (Model TC1705T) for extreme temperature
applications (-20° to 70°C & -40° to 80°C).
Data Rates up to 256Kbps
Distances Up to 80km*
All Popular Electrical Interfaces
Built-In Test Signal Generator
Local & Remote Loopback
Interchangeable Interface
Supports 5 RS-232 Control Signals
Multimode & Single Mode Mode (850/1300/1550nm)
Built-In Power Redundancy
Local Dry Contact Alarm Relay
Standalone/Wallmount or Rackmount
High Temperature (-20°C to 70°C & -40° to 80°C)
Versions Optional
"High Speed" Sync/Async Fiber
Optic Modems
(Model TC1710) Prices Start at $895.00 ea.
Data Rates up to 10Mbps
Distances Up to 80km*
All Popular Electrical Interfaces
Built-In Test Signal Generator
Local & Remote Loopback
Interchangeable Interface
Multimode & Single Mode Mode (1300/1550nm)
Built-In Power Redundancy
Local Dry Contact Alarm Relay
Standalone/Wallmount or Rackmount
Temperature Hardened (-20°C to 70°C & -40° to 80°C)
Versions Optional
Applications
The TC1710 High Speed Fiber Optic Modem is intended for applications
requiring high data rates and handshaking.
Telephone fiber modem, telephone fiber converter, telephone to
fiber multiplexer, telephone fiber mux, analog phone to fiber, POTS,
2-wire
"Quick-Talk" RS-232 or Fiber
Telephone Extenders
(Model TC1900/TC1901*) Prices Start at $980.00 ea.
Extend Telephone Link via Fiber
or Async RS-232
Async Baud Rate From 19.2Kbps
16 LEDs/4 DIP Switches for Diagnostics
PBX and Key System Compatible, FXO/FXS Selectable
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
Built-In Dry Contact Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC, or 115/230VAC with Power Adapter
Applications
The TC1900/1901 is often used to extend telephone service in campus
networks, power plants, substations, etc or use an existing service
data channel to set up a telephone link. It is also used to set
up "Hot Links" telephone service via existing RS-232 links
on satellite, fiber optic or microwave networks. Other applications
include using the inherent benefits of fiber optics to reduce noise/EMI
or maximize security/isolation.
home
| cables | switches
| Contact Us our team
| locations
|