Hendry
Relay Racks-Hendry Racks-19" Steel Relay Racks- 23" Steel Relay Racks
American Tech
Supply carries a complete line of Hendry relay racks including 19" steel
relay racks, 23" steel racks and enclosures for very application from the
telephone closet to the network room to your co-location data center. Call us
today for a price quote at (866) 650-DATA.
We
Now Carry Hendry Racks & Newton Racks and Rack Accesories
West
Coast (866) 342-3721 ------East
Coast (866) 650-DATA
We
are Updating Our Website- Please Call Us Your Hendry Part Number and We WIll Provide
You With An Immediate Quote
19"
Steel Ceiling Mounted Relay Racks- Available in 19" and 23"
STANDARD
FEATURES
* All racks are drilled and tapped to receive guard rails, cable rings and accessories.
* Holes are provided in sides for joining racks or mounting ladder end guards.
* All racks are equipped with top angle, base angle and bolts for assembly.
* Order guard rails and accessories as required.
* Different RMU options are
available. See the Options and Ordering Information page.
SPECIFICATIONS
MATERIAL- Steel
UPRIGHTS- 3"-4.1# channel
BASE- 2-1/2" x 3-1/2"
x 1/4" angle
TOP- 2" x 2" x 1/4" angle
MTG. HOLES-
STD. 1-3/4" EIA wide, 1-1/4", 1/2", 1-1/4", 12-24 tapped
FINISH- Telephone gray, polyurethane, textured powder coating.
.
19"
Steel Floor Mounted Relay Racks- Available in 19" and 23"
SPECIFICATIONS
MATERIAL- Steel
UPRIGHTS- 3"-4.1# channel
BASE- 2-1/2" x 3-1/2"
x 1/4" angle
TOP- 2" x 2" x 1/4" angle
MTG. HOLES-
STD. 1-3/4" EIA wide, 1-1/4", 1/2", 1-1/4", 12-24 tapped
FINISH- Telephone gray, polyurethane, textured powder coating.
STANDARD
FEATURES
* All racks are drilled and tapped to receive guard rails, cable rings and accessories.
* Holes are provided in sides for joining racks or mounting ladder end guards.
* All racks are equipped with top bars, base angles and bolts for assembly.
* Racks over 8'-0" should be ordered with a top angle. Order option D.
* Order guard rails and accessories as required.
* Different RMU options are
available. See the Options and Ordering Information page.
SPECIFICATIONS
MATERIAL- Steel
UPRIGHTS- 3" x 1.41" - 4.1# channel
BASE- 3-1/2" x 6" x 5/16" angle
TOP- 1" x 3/8" bar
MTG. HOLES- STD. 1-3/4" EIA wide, 1-1/4", 1/2", 1-1/4", 12-24
tapped
FINISH- Telephone gray, polyurethane, textured powder coating.
19"
Steel Channel Mounted Relay Racks- Available in 19" and 23"
STANDARD
FEATURES
* This steel welded Channel rack has been designed for the Bell System and has
been tested and approved to Pacific Bell Static Seismic Test PBS-000-102PT.
* Overhead bracing is required for seismic installations.
* All racks are
drilled and tapped to receive guard rails, cable rings and accessories.
*
Holes are provided in sides for joining racks or mounting ladder end guards.
* Welded construction is used on the basic frame shown.
* 3" high top
angle may prevent mounting of deep equipment in top mounting space.
* Order
seismic anchor kit, 02100-19, separately.
* Order guard rails and accessories
as required.
* Different RMU options are available. See the Options and Ordering
Information page.
trans.gif
SPECIFICATIONS
MATERIAL- Steel
UPRIGHTS- 3" x 1.41" - 4.1# channel
BASE- 3-1/2" x 6" x 5/16" angle
TOP BAR- 1" x 3/8"
bar
TOP ANGLE- 2" x 3" x 1/4"
MTG. HOLES- STD. 1-3/4"
EIA wide, 1-1/4", 1/2", 1-1/4", 12-24 tapped
FINISH- Telephone
gray, polyurethane, textured powder coating
home
| cables | switches | Contact
Us our team | locations