cable, vdsl, patch

Calcium Sulphate Access Floor

Design

The high-density NORTEC calcium sulphate panels are manufactured with selected raw materials in a patented single-pulse pressing procedure. This combination guarantees a consistently high-quality product. As reinforcing material, only nontoxic, unbleached cellulose fibers of primary and secondary cellulose are used. This enables us to manufacture a product of consistently superior quality. The panel can be supplied with or without an edge band (dependent on the floor covering applied); these being tapered for easier installation of the integrated panel system. The underside may be additionally lined with galvanized steel sheet or aluminum foil.

Calcium sulphate panel

The support elements used have been specially developed for use with access flooring. The main components of these panels are gypsum and high-quality cellulose fibers. Various thicknesses of the panels, as well as special formats, round off the NORTEC line of products. To be able to manufacture standard access floor panels with extra static requirements, and without increasing the thickness of the panels, a special manufacturing process was developed to meet growing demands.

Design of the edges

The edges of the panels are tapered down at 5?, which enables simple removal and exchange of the integrated panel system. As an option, the panels can be jacketed with a high-quality plastic compound edge, which offers a defined electrostatic conductivity.

Coating of the lower face of the panel

The increased strength of ST-type panels is based on 0.5 mm (0.02”) thick galvanized steel sheet on the lower face of the panel.

Floor coverings

Generally, all common access floor coverings are suited. In the standard design, the edge is, with elastic coverings, pulled up to the upper surface of the covering (exception: knobby floor coverings). When applying loosely laid floor coverings, we recommend providing the carrier panels with an appropriate coating.

Special features

Individual panel thickness The panel edges are beveled downward, simplify mounting and replacement of the panels Meet the strictest requirements of fire safety F60 To increase the eventual load capacity, the lower surface of the panel may be coated with an iron plate The panel edges are covered with plastic, which provides optimal board contact Stringers and other optional components of the system make it possible to increase the strength of the construction

Range of use

Computer rooms and control rooms Industrial and factory rooms Training and research rooms Office and designing areas

Construction

Optional surface coating Protective edging of the panel depending on the coating type Calcium sulfate panel For panels with lower coating (ST-type) ? iron plate coating Panel (fiber-strengthened gypsum) Gusset for the support top Lateral edge (optional) Access floor support Support base Main floor

Fire resistance

The steadily increasing demand for using incombustible materials to reduce risk of fire in buildings makes the Hyperline Calcium Sulphate Access Floor a very valuable solution, which offers both functional and safety advantages. Superior fire resistance and alevel of comfort are the main features of the Hyperline Calcium Sulphate Access Floor ? a most intelligent solution.

High degree of flexibility Standard panel thicknesses between 0.9” to 1.6” (24 to 40 mm), as well as unique material combinations are available to accommodate any specific load-bearing requirement ? tailor-made solutions can be offered as standard. Acoustic characteristics The material structure, design features, and high precision production of the access floor panels provide excellent acoustic values. The great walking properties offer a high degree of comfort and create the perfect working environment. Electrostatic characteristics Electrostatic charges are dissipated, regardless of panel material, by the inherent design features. The ohmic resistance defined in this way allows grounding compliance in accordance with VDE 0100 using suitable floor coverings. Air ventilation Either plastic or metal ventilation components can be fitted into the calcium sulphate panel, or steel ventilation panels can be installed instead of NORTEC panels, in order to accommodate the requirements of the sub-floor air conditioning system. Ecology Due to the environmentally-friendly production process, and the use of ecologically safe materials, 90 to 97% of the Hyperline panels will be recyclable at the end of their life ? a very important ecological consideration today.

System specifications

System designation	NORTEC
Type	MS13-ST-ST		MS15-ST-ST		MH18-ST		MS20-ST
Description
Panel/material	Calcium sulphate panel with bevelled edges, steel sheet on bottom and top sides				Calcium sulphate panel, optionally with edge trim, steel sheet on bottom side
Dimensions	600 x 600 mm (23.6” x 23.6”)
Panel thickness	14 mm (0.55”)		16 mm (0.6”)		18.5 mm (0.7”)		20.5 mm (0.8”)
System weight1	29 kg/m2? (5.9 lbs/ft2)		32 kg/m2? (6.6 lbs/ft2)		33 kg/m2(6.8 lbs/ft2)		36 kg/m2?(7.4 lbs/ft2)
Substructure with construction heights?> 500 mm (19.7”)	Steel pedestals RO stringer
Construction height2	From 22 mm (0.86”), special flooring system for areas undergoing renovations with extremely low finished floor heights
Load capacity rating (Nominal load)	See "STATICS" supplement
Fireproofing3?Building Material Class of the panel	A1 (non-combustible)
Soundproofing4	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering		With floor covering(VM = 26 dB)
Rated degree of longitudinal sound reduction	42 dB	-	-	50 dB	-		50 dB
Sound insulation index	-	-	-	-	-		-
Rated footfall sound level	-	22 dB	-	53 dB	-		53 dB
Degree of improvement in footfall sound	-	-	-	22 dB	-		22 dB
Suitability of coverings	Loosely laid tiles
Electric conductivity5	>= 106?O

1) Floor height 150 mm (5.9”) (FFH), without covering
2) Clear height, special heights available on request
3) According to DIN 4102/EN 13 501
4) VDI 3762 must be followed
5) The values are affected by the floor covering

System specifications

System designation	NORTEC
Type	MU24-ST		MS30		MU30-ST		MU30-ST-ST
Description
Panel/material	Calcium sulphate panel with bevelled edges, steel sheet on bottom		Calcium sulphate panel with bevelled edges		Calcium sulphate panel, optionally with edge trim with steel sheet on bottom side		Calcium sulphate panel, optionally with edge trim with steel sheet on bottom and top side
Dimensions	600 x 600 mm (23.6” x 23.6”)
Panel thickness	24.5 mm (1”)		30 mm (1.18”)		30.5 mm (1.2”)		31 mm (1.22”)
System weight1	42 kg/m2? (8.6 lbs/ft2)		47 kg/m2? (9.6 lbs/ft2)		52 kg/m2? (10.7 lbs/ft2)		55 kg/m2? (11.3 lbs/ft2)
Substructure with construction heights> 500 mm (19.7”)	Steel pedestals RO stringer
Construction height2	28 ? 2 000 mm (1.1” ? 7 8.7”)						28 ? 1 450 mm?(1.1” ? 57.1”)
Load capacity rating (Nominal load)	See "STATICS" supplement
Fireproofing3?Building Material Class of the panel	A1 (non-combustible)
Soundproofing4	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering		With floor covering?(VM = 26 dB)
Rated degree of longitudinal sound reduction	49 dB	50 dB	48 dB	48 dB	48 dB		48 dB
Sound insulation index	62 dB	-	62 dB	-	62 dB		-
Rated footfall sound level	65 dB	47 dB	73 dB	47 dB	73 dB		47 dB
Degree of improvement in footfall sound	-	-	-	-	-		-
Suitability of coverings	Textile coverings, Elastic coverings, Loosely laid tiles, WOODline		Textile coverings, Elastic coverings, Loosely laid tiles, WOODline, STONEline				Loosely laid tiles
Electric conductivity5	>= 106?O

1) Floor height 150 mm (5.9”) (FFH), without covering
2) Clear height, special heights available on request
3) According to DIN 4102/EN 13 501
4) VDI 3762 must be followed
5) The values are affected by the floor covering

System specifications

System designation	NORTEC
Type	MS36		MU36-ST		MX40		MS38-ST
Description
Panel/material	Calcium sulphate panel, optionally with edge trim		Calcium sulphate panel, optionally with edge trim with steel sheet on bottom		Calcium sulphate panel, optionally with edge trim		Calcium sulphate panel, optionally with edge trim with steel sheet on bottom
Dimensions	600 x 600 mm (23.6” x 23.6”)
Panel thickness	36 mm (1.4”)		36.5 mm (1.44”)		40 mm (1.6”)		38.5 mm (1.5”)
System weight1	56 kg/m2? (11.5 lbs/ft2)		61 kg/m2? (12.5 lbs/ft2)		62 kg/m2(12.7 lbs/ft2)		61 kg/m2? (12.5 lbs/ft2)
Substructure with construction heights> 500 mm (19.7”)	Steel pedestals RO stringer
Construction height2	28 ? 2 000 mm(1.1” ? 7 8.7”)		28 ? 1 450 mm (1.1” ? 57.1”)
Load capacity rating (Nominal load)	See "STATICS" supplement
Fireproofing3?Building Material Class of the panel	A1 (non-combustible) F60/REI 60
Soundproofing4	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering		With floor covering?(VM = 26 dB)
Rated degree of longitudinal sound reduction	50 dB	51 dB	49 dB	-	49 dB		-
Sound insulation index	62 dB	-	62 dB	-	62 dB		-
Rated footfall sound level	70 dB	52 dB	70 dB	-	70 dB		-
Degree of improvement in footfall sound	14 dB	28 dB	14 dB	-	14 dB		-
Suitability of coverings	Textile coverings, Elastic coverings, Loosely laid tiles, WOODline, STONEline
Electric conductivity5	>= 106?O

1) Floor height 150 mm (5.9”) (FFH), without covering
2) Clear height, special heights available on request
3) According to DIN 4102/EN 13 501
4) VDI 3762 must be followed; values of the 36 mm (1.4”) panel tested
5) The values are affected by the floor covering

System specifications

System designation	NORTEC
Type	MS36-H12-CM		MU36-ST-RM		MS36-CL		MH36-CL
Description
Panel/material	Calcium sulphate panel, optionally with edge trim		Calcium sulphate panel, optionally with edge trim with steel sheet on bottom side		Calcium sulphate panel, optionally with edge trim
Dimensions	600 x 600 mm (23.6” x 23.6”)
Panel thickness	36 mm (1.4”)		36.5 mm (1.44”)		36 mm (1.4”)
System weight1	63 kg/m2?(12.9 lbs/ft2)						65 kg/m2(13.3 lbs/ft2)
Substructure with construction heights?> 500 mm (19.7”)	Steel pedestals Grid: 600x1200 mm (23.6”x47.2”) CM-profile		Steel pedestals RM stringer		Steel pedestals CL-profile
Construction height2	28 ? 1450 mm (1.1” ? 57.1”)
Load capacity rating (Nominal load)	See "STATICS" supplement
Fireproofing3?Building Material Class of the panel	A1 (non-combustible)				A1 (non-combustible) supplement F30 / REI 30
Soundproofing4	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering	With floor covering(VM = 26 dB)	Without floor covering		With floor covering(VM = 26 dB)
Rated degree of longitudinal sound reduction	50 dB	51 dB	49 dB	-	50 dB		51 dB
Sound insulation index	62 dB	-	62 dB	-	62 dB		-
Rated footfall sound level	70 dB	52 dB	70 dB	-	70 dB		52 dB
Degree of improvement in footfall sound	14 dB	28 dB	14 dB	-	14 dB		28 dB
Suitability of coverings	Textile coverings, Elastic coverings, Loosely laid tiles, WOODline, STONEline
Electric conductivity5	>= 106?O

1) Floor height 150 mm (5.9”) (FFH), without covering
2) Clear height, special heights available on request
3) According to DIN 4102/EN 13 501
4) VDI 3762 must be followed
5) The values are affected by the floor covering

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives