cable, vdsl, patch

Calcium Sulphate Access Floor Comfort

NORTEC comfort floor system combines all the advantages of a raised floor system with sub-floor heating. This solution offers great freedom to planners and architects, as there is no need for radiators. If the room gets too warm, NORTEC comfort can also be used to cool the room. As there is no drying time for the NORTEC comfort floor system, it is immediately ready for use after installation. Range of use Training and research rooms Office and designing areas Commercial and private residential constructions Renovation projects Projects with short construction times Special features The performance ratings can be matched to the particular project Heating and cooling is possible Floor coverings Textile coverings Elastic coverings STONEline Ceramic, Natural stone, Artificial stone

NORTEC comfort MX44-AL-C

Heating: Heat-flow density (without floor covering): 85 W/m2 Excess temperature of heating agent (DIN 4725-4): 17.2 K Surface temperature: 84.2?F (29?C) Water content: 0.058 l/rm Temperature lag R?, floor covering [m2K/W] (Reference values): Carpet 0.07 ? 0.23 Ceramic tiles 0.02 PVC 0.01 Active area approx. 75%

NORTEC comfort MX44-AL-S

Heating: Heat-flow density (without fl oor covering): 85 W/m? Excess temperature of heating agent (DIN 4725-4): 15.5 K Surface temperature: 84.2?F (29?C) Water content: 0.058 l/rm Temperature lag R?, fl oor covering [m?K/W] (Reference values): Carpet 0.07 ? 0.23 Ceramic tiles 0.02 PVC 0.01 Active area approx. 75%

System specifications

System designation	NORTEC comfort
Type	MX44-AL-C	MX44-AL-S
Panel/material	Calcium sulphate panel with factory-installed heating and cooling lines,? aluminum foil on bottom side
	with 0.4” (10 mm) calcium sulphate panel on top side for thermal distribution	with natural stone on top side for thermal distribution
Dimensions	600 x 600 mm (23.6” x 23.6”)
Panel thickness	44 mm (1.7”)
System weight1	62 kg/m2?(12.7" lbs/ft2)	70 kg/m2?(14.3" lbs/ft2)
Substructure with construction heights> 500 mm (19.7”)	Steel pedestals RO stringer
Construction height2	28 ? 1450 mm (1.1” ? 57.1”)
Load capacity rating (Nominal load)	See "STATICS" supplement
Fireproofing3?Building Material Class of the panel	A1 (non-combustible) F30 / REI 30
Heating capacity	85 W/m2?(7.9 W/ft2)
Permissible system pressure	<= 8.3 bar
Suitability of coverings	Textile coverings, Elastic coverings	STONEline

1) Floor height 150 mm (5.9”) (FFH), without covering
2) Clear height, special heights available on request
3) According to DIN 4102 / EN 13 501

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives