Ideal Product Categories

About Us

cable, vdsl, patch

 

Hyperline- Ideal Industries Cutters - Coax/Twisted Pair Cutters - Twisted Pair Cutters - Coax Cutters - Fiber Cutters Fiber Optic Test Equipment- Ideal Industries


American Tech Supply is now an authorized Hyperline distributor

From copper to fiber, the Hyperline system of products includes everything you need for installation, termination, testing and troubleshooting. And our level of technical expertise, training and customer support ensures that your total cost of ownership is kept to a minimum.

The access floor stringers

Stringer Stringer
Stringer Stringer

Description
Stringers can be used to reinforce the static properties of the raised floor. There is a clip type, a bolted type, and clamp type stringers to choose from.?
RO, RL (light) and RM (medium) stringers are made of cold-bent, galvanized steel sheet. The cross-sectional form of the RO-type is similar to that of a curved spring clamp. This allows the stringer to be installed by pressing vertically from the top. With the RL- and RM-types, the crosssectional form of which is U-shaped, there are springs located on the sides to prevent metallic rattling. Slots in the top side of the stringers are ideal for bolting with drilling screws.

RO-type (light), RL-type (average), RM-type (reinforced) stringers are made of galvanized steel plate by means of cold bending method.?
The form of fastening of RO-type light stringers enables the stringers of this type to withstand considerable horizontal loads.?
Average and reinforced stringers of RL- and RM-type with U-shaped unit-to-unit fastening form have springs on the lateral shores. The holes on the upper face of the stringer are designed for bolt clamp.
Average RL-type stingers are used to reinforce the system horizontally and vertically. The allowable loading on the system is up to 500N.?
Reinforced RM-type stringers are used to reinforce the system horizontally and vertically. The allowable loading on the system is up to 2000N.

Application
The RO stringer is used only for reinforcing systems horizontally. The RL-type stringer is suitable for reinforcing systems both horizontally and vertically. The load-bearing capacity is improved by approximately 500 N.
The RM-type stringer is also suitable for reinforcing systems both horizontally and vertically. The load-bearing capacity is improved by approximately 2.000 N.

Specifications:
Stringer type RO RL RM
Dimensions 7.5x26x7.5 mm (0.3"x1"x0.3") 35x26x35 mm (1.4"x1"x1.4") 54x26x54 mm (2.1"x1"x2.1")
Length 536 mm (21.1") 539 mm (21.2") 539 mm (21.2")
Thickness 0.6 mm (0.02") 1.0 mm (0.04") 1.0 mm (0.04")
Concentrated load Transverse stability 500 N 2000 N

?

 

 

 

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

 

 

 

 

 

 



Patch Panels

Work Area Outlets

Keystone Jacks

Modular Plugs

Cross Connection

Fiber Optic

Cable Managers

Patch Cords

Cables

Installation Accessories

Tools

Racks and Cabinets

Power Distribution Units

Access Floors

Defem Wire Mesh Cable Trays and CombiRack System

Axelent Cable Trays

 

BIF-Bend Insensitive Fiber