Pricing On Fiber Optic Patch Panels-ICC Blank Patch Panels- ICC Blank Fiber Optic Patch Panel- Blank Patch Panels

American Tech Supply carries a complete line of fiber optic patch panels and fiber optic enclosures that are compatible with the Corning Fiber Optic Enclosure Line of products including our Corning (compatible) fiber optic patch panels, outdoor fiber optic enclosures,wallmount fiber optic panels and rackmount fiber optic patch panel fiber optic enclosures which are designed for direct termination of up to 144 fibers. We carry a full line of fiber optic enclosures and fiber optic patch panels from Century, Emerson-Fiberconn, Fiber Connections, Corning, ADC and others.The RAC series patch panel accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control.

American Tech Supply carries ICC's blank fiber optic patch panels that can be loaded any combination of SC fiber optic adapters, ST fiber optic adapters, MTRJ fiber optic adapters or LC fiber optic adapters.

Complete List Of Fiber Optic Assembly- Jumper Pricing

ICFORPP1RM-Fiber Optic Blank Patch Panel, 3-Panel, 1 RMS


Panel is designed to accommodate fiber optic adapter panels.

 

ICC's Fiber Optic Patch Panels Are Available in the following sizes: Click On any one of the below links for additional product information:

SC-Fiber Optic Patch Panel 12 ports

SC-Fiber Optic Patch Panel 24 ports

ST-Fiber Optic Patch Panel 24 ports

SC-ST Fiber Optic Patch Panel 12 ports

MTRJ-Fiber Optic Patch Panel 24 port duplex

Fiber Optic Blank Patch Panel with 3 openings, 1RMS

Fiber Optic Blank Patch Panel with 6 opening, 2RMS

 

Fiber Optic Enclosures-Fiber Optic Patch Panels- Wall Mount Fiber Optic Patch Panels- 24 Port Fiber Optic Patch Panels-Indoor Fiber Optic Patch Panels - 48 Port Fiber Optic Patch Panels-72 Port Fiber Optic Patch Panels- 144 Port Patch Panels- Rack Mount Fiber Optic Patch Panels- Fiber Optic Frames- Fiber Optic Main Distribution Frame -Network Bays- Open Bay Frame Systems

American Tech Supply carries a complete line of fiber optic patch panels and fiber optic enclosures that are compatible with the Corning Fiber Optic Enclosure Line of products including our Corning (compatible) fiber optic patch panels, outdoor fiber optic enclosures,wallmount fiber optic panels and rackmount fiber optic patch panel fiber optic enclosures which are designed for direct termination of up to 144 fibers. We carry a full line of fiber optic enclosures and fiber optic patch panels from Century, Emerson-Fiberconn, Fiber Connections, Corning, ADC and others.The RAC series patch panel accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. We also offer a large variety of fiber optic connector adapters that are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management. Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module pre-assemblies are available for easy fiber installation and management.

We also specialize in custom fiber optic enclosures- call us or more information at (866) 342-3721 for all you fiber optic patch panel and fiber optic enclosure needs. Remember- we meet or beat all USA Based Pricing!

West Coast (866) 342-3721-------East Coast (866) 650-DATA

We Supply FTTH Projects-SBC-Verizon Fiber To The Curb/Home Fiber Optic-OSP-Fiber Test Equipment

Front & Rear Loading Fiber Optic Patch Panels
Our new fiber optic enclosures by Contech and fiber patch panels are available in multiple configurations with high density port counts in a minimum of space, which provide an extremely organized above the floor infrastructure and manageable cable reconfiguration. ConTech features a 256 port high density panel with either LC, MT-RJ, or MU connector configurations in the same foot print for migration ease from one connector style to another. Also available are high density 12 to 48 port 1 rack unit panels with ribbon array connectivity MP or MTP connectors

Front & Rear Mounted Fiber Optic Enclosures Versatile cassettes High density Front access Rear access Under floor Retro-fit of existing panels LC, MT-RJ, MU, SC duplex Custom silk screening 19, 23, or 24 inch mounting Innovative wire management

Outside Plant Fiber Enclosures Click Here

Lan Racks

ICC Fiber Optic Enclosures

36 Port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Patch Panel Part No. ATSRAC-1X- Price $87.00
Dimensions: Width = 17'', Depth = 12'', Height = 1.75''
Weight (unloaded): 10.3 lbs.
Port Capacity: 6-36
Features: 1U rackmount can be loaded with up to 3 panels with 6 to 36 port capacity. Reversible mounting bracket for 19'' or 23'' racks. 16-gauge steel with black powder finish coat. Steel door at front and at rear with ¼ turn latches. Top lid removable at both front and rear. Cable management spools in the rear of the enclosure and cable management rings to the front for jumper management. Sliding tray for access to both front and rear. Large entry points at front for easy jumper management, as well as "D" shaped cutouts at rear for access of backbone cable. Accessory pack included with additional cable management, label holders and screws for securing to rack and top panels. Labeling kit included for clear and precise identification of ports.
Lead time: In Stock, Immediate Shipment

ATS 19” Rack Mount Fiber Optic Enclosure

 

The 12 Port and 24 Port Rack Mount Enclosures from ATS are used to house fiber terminations and accommodate patching of fiber links.

• The rear panel workspace has two cable retention rings for storage of excess fiber.
• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATS at 1-866-342-3721 to order in black 16 gauge steel.

Part No. ATSRAC-12-OP ATS19" 12 Port Rack Mount Enclosure, Holds 2 ( 6 Packs ) Price $ 56.00

Part No. ATSRAC-24-OP ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 75.00

New is a ATS-RS24 and ATS F1-RS72 rack mount splice and termination enclosure. Allows for patching on top and convenient organization of splice trays in the bottom shelf. Both 24 and 72 patch and splice versions are available. Call ATS at (866) 342-3721 to order in black 16 gauge steel. .

• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATS at (866) 342-3721 to order in black 16 gauge steel.

Part No. ATSRS-24 ATS 19" 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ) Price $ 189.00 each

Part No. ATSRS ATS 72 Port Rack Patch & Splice Enclosure ) Price $ 270.00 each

The ATS Rack Mount Enclosure is designed for low or high density patching applications. This sturdy 16 gauge aluminum rack enclosure is available in 24, 48, 72, 96 and 144 port versions in standard beige. This unit provides a lift-off door with front and back access to the slideout tray. The ATS Rack Mount Enclosure features a smoked Lexan front door. Call ATS at 1-866-342-3721 to order in black 16 gauge steel.

• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATS at (866) 342-3721 to order in black 16 gauge steel.
• ATS-F1RM144X - 144 Port Rack Mount Enclosure, unloaded, holds 24 six packs, 13 1/2"D x 17 1/8"W x 15"H, 19lbs.  
• ATS-F1RM24XA - 24 Port Rack Mount Enclosure, unloaded, holds 4 six packs, 13 1/4"D x 17 1/8"W x 3 1/2"H, 12lbs.
• ATS-F1RM48X - 48 Port Rack Mount Enclosure, unloaded, holds 6 eight packs, 13 1/4"D x 17 1/8"W x 4 3/4"H, 14lbs.
• ATS-F1RM72X - 72 Port Rack Mount Enclosure, unloaded, holds 12 six packs, 13 1/4"D x 17 1/8"W 7 1/8"H, 17lbs.

Part No. ATS-F1RM144X- ATS 144 Port Rack Mount Enclosure, Holds 24 ( 6 Packs ) Price $ 245.00 each

Part No. ATS-F1RM24XA -ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 99.00 each

Part No. ATS-F1RM48X- ATS 48 Port Rack Mount Enclosure, Holds 6 ( 8 Packs ) Price $ 112.00 each

Part No.ATS-F1RM72X ATSATS 72 Port Rack Mount Enclosure, Holds 12 ( 6 Packs ) Price $170.00 each ------------------------ FIS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ---- --

24 port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Optic Patch Panel Part No. ATSRAC-12X-Price $96.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-24
Features: 2U rackmount can be loaded with 2 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

48 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATSRAC-24X- Price $100.50
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-48
Features: 2U rackmount can be loaded with 4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

72 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATS RAC-2X- Price $105.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-72
Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Sliding tray for high-density situations. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

144 Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X Price- $173.25
Dimensions: Width = 17'', Depth = 12'', Height = 7''
Weight (unloaded): 11.5 lbs.
Port Capacity: 6-144
Features: 4U enclosure can be loaded with 12 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder finish coat.
Lead time: In Stock, Immediate Shipment

 

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATS WAC-1X
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Fiber Optic Wall Mount Enclosure- Pact Panel.Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

------------------------------------

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

144 Port Fiber Optic Enclosure- Fiber Optic Patch Panel

Part No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.--------

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

144 Port Fiber Optic Enclosure- Fiber Optic Patch Panel

Part No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.

ATS "Six" Packs

 

Available are ATS adapter panels with pigtails for splicing.  This kit includes 1, 6, or 8 pack loaded adapter panel with pigtails.  Connector styles are indicated and standard length of pigtails are 3 meters.  Pigtails are TIA-568-A color coded.  Contact your ATS sales associate at 1-866-342-3721 for custom adapter/pigtail kits.

 

Singlemode Six Pack Kits - 3 meters

• ATSP6SCSM - (1) SC SM 6 pack with 6 SC/UPC pigtails
• ATSP6FCSM - (1) FC SM 6 pack with 6 FC/UPC pigtails
• ATSP6STSM - (1) ST SM 6 pack with 6 ST/UPC pigtails
• ATSP8SCSM - (1) SC SM 8 pack with 8 SC/UPC pigtails
• ATSP6DSCSM - (1) Duplex SC SM 6 pack with 12 SC/UPC pigtails

Multimode Six Pack Kits - 3 meters

• ATSP6SCMM  - (1) SC MM 6 pack with 6 SC pigtails
• ATSP8SCMM - (1) SC MM 8 pack with 8 eight SC pigtails
• ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

ATSP6SCSM-1-SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price$ 160.00

ATS-P6STSM-1-SC Multimode 6 Pack with 6-SC/UPC Pigtails Price $ 50.00

ATSP8SCSM-1-SC Singlemode 6 Pack with 6-SC/UPC Pigtails Price $ 81.00

ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00

ATSP8SCMM-1-ST Singlemode 6 Pack with 6-ST/UPC Pigtails Price $ 82.00

ATSP6STMM-1-SC Singlemode 8 Pack with 8-SC/UPC Pigtails Price $ 99.00

ATS Snap Six- Packs For Distribution Frames

These pre-terminated adapter panels provide convenience to technicians splicing into fiber distribution frames.  Available in 6 or 12 fiber bundles with TIA-598-A standard color code, these bundled fibers provide cable management from patchpanel to splice bays. Standard 3 meters. Contact ATSat 1-866-342-3721 for custom lengths and different connector style adapter panels

 

Singlemode Six Pack- Eight Pack Kits - 3 meters

• ATSC6LSSP - (6) adapters, SC/UPC, 6 fiber pigtail, SM, 3 meters
• ATSSC6LSSP - (6) duplex adapters, SC/UPC, 12 fiber pigtail, SM, 3 meters
• ATSC6APCSP - (6) adapters, SC/APC, 6 fiber pigtail, SM, 3 meters
• ATSC6DLSP - (6) duplex adapters, LC/UPC, 12 fiber pigtail, SM, 3 meters
• ATST6LSSP - (6) duplex adapters, ST, 12 fiber pigtail, SM, 3 meters

• Multimode Six Pack- 8 Pack Kits - 3 meters
• ATSC6LMSP - (6) duplex adapters, SC, 12 fiber pigtail, MM, 3 meters
• ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

PRICING:

ATSC6LSSP - 1 SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price $ 190.70 each

ATSC6APCSP - 1 SC Singlemode 6 Pack with SC/APC Pigtails Price $ 95.50 each

ATSC6DLSP - 1-LC Duplex Singlemode 6 Pack with 12-LC/APC Pigtails Price $ 190.70 each

ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00

ATST6LSSP-1ST Multimode 6 Pack with 6 ST/PC Pigtails$ 86.00 each

ATST6LSMP -1 -ST Multimode 6 Pack with 6 ST/PC Pigtails Price $ 58.00 each

 

Pricing For Six Pack-8 Pack Plates For Wall & Rack Mount Fiber Optic Enclosures

 

ATS-Blank	ATS Blank Blank Plate with No Holes	$ 4.75
ATSSC6LM	6 Loaded-SC Duplex Multimode-Singlemode Adapters	$ 48.80
ATSFC6	6 Pack Plate (unloaded)	$ 4.75
ATSFC6APC	6 Pack Loaded with FC/APC Singlemode Adapters	$ 49.20
ATSF1FC6L	6 Pack Loaded w/FC-Multimode/Singlemode Adapters	$ 37.90
ATSF1LC6DL	6 Pack Loaded w/LC Duplex-Singlemode Adapters	$ 52.20
ATSF1LC6L	6 Pack Plate Loaded w/LC Duplex-Multimode Adapers	$ 31.45
ATSF1MTRJ6L	6 Pack Loaded w/MTRJ Multimode Adapters	$ 21.70
ATSF1SC6	6 Pack SC Plate ( Unloaded)	$ 4.75
ATSF1SC6APC	6 Pack Loaded w/SC/APC Singlemode Adapters	$ 28.90
ATSF1SC6L	6 Pack Loaded w/SC-Multimode/Singlemode Adapters	$ 19.95
ATSF1SC8	8 Pack SC Plate (Unloaded)	$ 4.75
ATSF1SC8LM	8 Pack Loaded with SC Multimode Adapters	$ 24.90
ATSF1SC8LS	8 Pack Loaded w/ SC -Singlemode Adapters	$ 35.75
ATSF1ST6	6 Pack ST Plate (Blank- Unloded)	$ 4.75
ATSF1ST6LM	6 Pack Plate Loaded w/ST -Multimode Adapters	$ 21.10
ATSF1ST6LS	6 Pack Loaded w/ ST Singlemode Adapters	$ 29.97
ATSF1ST8	8 Pack ST Plate (Unloaded)	$ 4.75
ATSF1ST8LM	8 Pack Loaded w/ ST- Multimode Adapters	$ 23.75
ATSF1ST8LS	8 Pack Loaded w/ ST-Singlemode Adapters	$ 37.75

 

 

Fiber Optic Enclosure Pricing For Enclosures Above

	Fiber Optic EnclosuresFiber Optic Patch Panels
ATSRAC-1X	Rack Mount 1U Patch Panel up to 36 Ports	$87.00
ATSRAC-12X	Rack Mount 2U Patch Panel up to 24 Ports	$96.00
ATSRAC-24X	Rack Mount 2U Patch Panel up to 48 Ports	$100.50
ATSRAC-2X	Rack Mount 2U Patch Panel up to 72 Ports	$105.00
ATSRAC-4X	Rack Mount 2U Patch Panel up to 144 Ports	$173.25
ATSWAC-2X	Wall Mount patch panel up to 24 ports	$37.49
ATSWAC-4X	Wall Mount patch panel up to 48 ports	$56.25
ATSWAC-8X	Wall Mount patch panel up to 96 ports	$122.63
ATSAP-106ST	6 Pack ST PB Insert MM/SM Adapter Panel	$10.43
ATSAP-108ST	8 Pack ST PB Insert MM/SM Adapter Panel	$14.93
ATSAP-112ST	12 Pack ST PB Insert MM/SM Adapter Panel	$24.00
ATSAP-106SC	6 Pack SC PB Insert MM/SM Adapter Panel	$13.43
ATSAP-108SC	8 Pack SC PB Insert MM/SM Adapter Panel	$24.00
ATSAP-104DSC	4 Pack Duplex SC PB Insert MM/SM Adapter Panel	$24.00
ATSAP-106DSC	6 Pack Duplex SC PB Insert MM/SM Adapter Panel	$30.00
ATSAP-106MTRJ	6 Pack MTRJ (12 fibers) Mating Sleeve MM/SM Adapter Panel	$24.00
ATSAP-112MTRJ	12 Pack MTRJ (24 fibers) Mating Sleeve MM/SM Adapter Panel	$45.00
ATSAP-106LC	6 Pack LC PB Insert adapter panel	$36.00
ATSAP-106FC	6 Pack FC PB Insert adapter panel	$24.00
ATSAP-108FC	8 Pack FC PB Insert adapter panel	$33.00
ATSAP-112FC	12 Pack FC PB Insert adapter panel	$39.00
ATSRAC-1X	Wall Mount patch panel up to 24 ports	$42.90

 

Alcoa Fiber Closures

Splice Closures are designed to simplify splice management. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant. Closures are designed and tested to Telcordia™ GR-771 requirements and Rural Utilities Service (RUS) listed.he AFL family of Aerial Weathertight Splice Closures is designed to provide a cost-effective solution for your aerial splicing needs. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant.

* LG-410
* LG-420
* LG-500
* LG-600

Features:

* Individual, patented, self-sizing cable grommets and strength member tie downs provide for cable additions without disturbing those previously installed
* Unique tongue-in-groove closure seal and back-to-back grommet design provides for a weathertight and insect seal
* Easy to maintain, all aerial closures are re-enterable without the need for any re-entry kits, special tools or sealants
* Designed and tested to Telcordia™ GR-771 aerial weathertight closure requirements
* Rural Utilities Service (RUS) listed

NEMA RATED Outdoor FIBER OPTIC ENCLOSURES We can supply you with a full line of standard and special NEMA rated enclosures and components well suited for Homeland Security Product support. Our own complete fiber-optics product offering can be leveraged in certain cases to minimize lead-time and provide value added solutions in a short time period

West Coast (866) 342-3721-------East Coast (866) 650-DATA

Click on Either Link For Your Needs

-------------------------------------------------

Rack Mount Enclosures---------------------------Wall Mount Fiber Enclosures

CNSLL-24&48 Fiber Termination & Splicing Shelf-CON288HD - Fiber Termination Patch Panel CNS024P-Patch & Splice Panel-CON012P - Fiber Termination Patch Panel- CON024P - Fiber Termination Patch Panel Fiber Storage Units (FSU) are used to conveniently and safely store an extra length of cable along the support strand for later use. Furnished as pairs, these FSUs feature all aluminum, baked acrylic enamel finish and all basic hardware for attachment to the support strand. Strand mount support brackets meet Telcordia® specification and are REA accepted. Galvanized strand clamping devices accommodate 1/4" to 7/16" strand and meet ASTM specifications A153 and B695. Features: * Furnished as pairs * All aluminum construction with full welded cross members * Baked acrylic enamel finish/chromate pre-finish per MIL-C-5541-B * Basic hardware (bolts, nuts and washers) for attachment of strand mount support brackets * Tie-wrap slots for securing cable from sliding * Strand-mount port brackets meet Telcordia specification and are REA accepted * Galvanized strand clamping devices accommodate 1/4" to 7/16" strand and meet ASTM specifications A153 and B695

 

Outdoor FTTH-Fiber Pedestals & Enclosures

ICC Fiber Patch Panels Click Here 12 Port-ST-25 Port ST-SC

ICC Fiber Patch Panels Click Here 12 Port- 24 Port- SC- MTRJ

Outdoor-Fiber Pedestals & Enclosures

Pedlock BDO Series Pedestals are a key element of any FTTP solution. In both greenfield and brownfield fiber deployments, BDO Pedestals provide easy access to branch and drop splice while protecting and storing loose buffer tube fiber optic cables. The exclusive BDO bracket allows technicians to mount splice trays and splitters securely with ample access to perform in-field splicing.
BDO Pedestals feature a non-metallic construction that offers super OSP protection against floods, fire, dirt, insects and impact. An expanded-capacity split base is designed to easily install around conduit-fed cable bundles in new construction (excludes 14” diameter pedestals). BDO pedestals are an ideal solution for rehabilitation of metallic enclosures, and protection of co-located copper/fiber distribution points. The CMPH is a versatile OSP closure designed for both new provisioning installations as well as rehabilitation of existing access points housed in metallic enclosures. The CMPH’s superior structural strength, outstanding environmental protection and ease of installation combine to create a long-life housing that reduces operational expenses.

A two-piece assembly features a lift-off dome and a corrugated channel base. The lift-off dome allows 360º access to internal working areas and includes self-latching locks with secondary bolt locks on both left and right side panels. The dome provides “bell jar” flood protection, eliminates intrusion of wind-blown rain and dust, and prevents unauthorized entry. The base provides ample room for entry of multiple large cables, including conduit. A spacious bottom entry allows technicians to easily slide the base over existing large cable rehabilitation applications.Internally, the CMPH features a sturdy metal bracket with craft-friendly repositionable splice bars, a cable splice support rail, and a 6-point bonding/grounding bar. The spacious internal working area accommodates copper splices of 1,800 to 3,600 pairs or passive fiber optic equipment (interconnect and splitter). The CMPH is an exceptional protection solution for copper/fiber co-locations.

Outside Plant Fiber Enclosures Click Here

 

 

Main Distribution Frames- Network Bays-Open Bay Systems

 

Additional Fiber Optic Enclosures

or visit this link for sample pricing Click Here For Fiber Optic Assembly Pricing

 

or visit this link for sample pricing Click Here For Fiber Optic Panel Pricing

Home | Cables | Switches | Contact Us | Our Team | Locations