Fiber Optic Splice Trays- ICC Fiber Optic Splice Trays-Splice Trays

American Tech Supply carries a complete line of AFL Fiber Optic Splice Trays, ADC fiber optic splice tray, Telect fiber optic splice trays, 3M fiber optic splice trays, Century fiber optic aplice trays and ICC Splice trays for use in 12 fiber optic cable splices, 24 fiber optic cable splices, 48 fiber optic cable splices, 144 to 288 fiber optic splice.

AFL's series of Fiber Optic Splice Trays offers a unique and flexible splice and storage system. Available in three industry standard config­urations (mechanical, fusion or ribbon) or as a totally universal kit, the AFL Telecommunications Fiber Optic system.

The 12-position splice tray is used as an accessory for fiber cable management products. The tray expands fiber splice capabilities. It also provides the splicing location for the fiber optic cables. The cables are left in the splice tray.The 12-position splice tray may be purchased empty or supplied with a loaded fiber frame. Splice trays are housed in splice drawers. Each ADC 8-inch (20.32 cm) splice module features eight drawers capable of holding up to two single, non-recessed, 12-position splice trays. This single-height splice tray accommodates a variety of splice chips with a capacity up to 192 splices.Splice Trays provides the most flexible and universal fiber storage system available. More info

NEW Fiber Optic Splice Trays Part Number ICFOSTFM24Splice Tray

Provides fiber splice protection for up to 24 fiber cable splices.

NEW Fiber Optic Splice Trays Part Number ICFOSTFM12 Splice Tray

Provides fiber splice protection for up to 12 fiber cable splices

 

SEE BELOW Part Numbers- Call For Pricing

For A Complete List Of Fiber Assemblies Click For A Complete List of Fiber Assemblies

Place an Order? Call Now (866) 342-3721

AFL's series of Fiber Optic Splice Trays offers a unique and flexible splice and storage system. Available in three industry standard config­urations (mechanical, fusion or ribbon) or as a totally universal kit, the AFL Telecommunications Fiber Optic Splice Trays provides the most flexible and universal fiber storage system available.

	LightLink™ 1200 Fiber Optic Splice Tray Splice Tray for storage of 12 mechanical splices. Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Clear plastic deep cover • (1) Mechanical splice holder • (10) Tie-wraps
	LightLink™ 2400 Fiber Optic Splice Tray Splice Tray for storage of 24 single fusion sleeves. Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Molded cover • (1) Single fusion splice holder • (10) Tie-wraps
	LightLink™ 2425 Fiber Optic Splice Tray Splice Tray for use in the LG-50 Sealed Closure. Stores 24 single fusion sleeves. Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base with mount bracket • (3) 8-position mass fusion splice holders
	LightLink™ 2448 Fiber Optic Splice Trays Splice Tray for storage of 24 single fusion sleeves or 4 mass fusion sleeves (48 fibers). Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Clear plastic deep cover • (1) Single fusion splice holder • (1) 4-position mass fusion holder • (10) Tie-wraps
	LightLink™ 2450 Fiber Optic Splice Tray Splice Tray for use in the LG-100 Sealed Closure. Stores 12 single fusion sleeves. Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Molded cover • (2) 6-position single fusion splice holders • (10) Tie-wraps
	LightLink™ 4800 Fiber Optic Splice Tray Splice Tray for storage of 4 mass fusion sleeves (48 fibers) plus six single fusion sleeves. Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Molded deep cover • (1) Mass/single fusion splice holder • (10) Tie-wraps
	LightLink™ 4848 Fiber Optic Splice Tray Splice Tray for storage of 12 mass fusion sleeves (144 fibers). Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Clear plastic deep cover • (1) 12-position mass fusion holder
	LightLink™ 4850 Fiber Optic Splice Tray Splice Tray for use in the LG-100 Sealed Closure. Stores 8 mass fusion sleeves (96 fibers). Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Molded deep cover • (2) 4-position mass fusion splice holders • (10) Tie-wraps
	LightLink™ 4896 Fiber Optic Splice Tray Splice Tray for storage of 96 single fusion sleeves or up to 24 mass fusion sleeves (288 fibers). Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base • Clear plastic cover • (1) 12-position mass fusion holder • (16) 6-position single splice holders • (6) 4-position mass fusion holders • (32) Tie-wraps
	LightLink™ OEE Telescoping Fiber Optic Splice Tray OEE telescoping splice tray stores up to 48 single fusion sleeves or 12 mass fusion sleeves (144 fibers). Features: • Interchangeable inserts allow for single or mass fusion or mechanical splices • Pre-molded snaps that securely hold buffer tubes or spiral wrap while splicing • In-line or butt splice capability • Pre-formed radiuses maintain bend requirements • Interlocking base and cover provides tray stability without the use of a bolt • Extended finger guides easily store and route loose fiber or ribbon Includes: • Molded base and slide assembly • Molded deep cover • (3) 4-position mass fusion splice holders • (2) 24-position single fusion splice holders

 

Fiber Optic Splice Trays

Description
Century Fiberoptic Splice Trays secure, organize and store spliced fibers. The 7” and 8.75” trays hold up to 12 fusion or mechanically splices fibers, and the 10” tray holds up to 24 fibers. The 5” width or the trays ensures adequate bend radius at all wavelengths. All trays come with cable ties to secure the buffer tubes to the tray.

Models
Splice Trays

 

NEW Fiber Optic Splice Trays Part Number ICFOSTFM24Splice Tray

Provides fiber splice protection for up to 24 fiber cable splices.

NEW Fiber Optic Splice Trays Part Number ICFOSTFM12 Splice Tray

Provides fiber splice protection for up to 12 fiber cable splices

 

ADC Splice Trays ADC Fiber Optic Splice Tray The 12-position splice tray is used as an accessory for fiber cable management products. The tray expands fiber splice capabilities. It also provides the splicing location for the fiber optic cables. The cables are left in the splice tray. The 12-position splice tray may be purchased empty or supplied with a loaded fiber frame. Splice trays are housed in splice drawers. Each ADC 8-inch (20.32 cm) splice module features eight drawers capable of holding up to two single, non-recessed, 12-position splice trays. This single-height splice tray accommodates a variety of splice chips with a capacity up to 192 splices. ADC Description and Part Number Splice Module Accessory Kit, Braided Sleeves and Labels E-501-L71 Call For Pricing & Availability (866) 342-3721 FEC Heat Shrink, w/ Splice Chips FEC-INCHS Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, FibrLok FST-3M Call For Pricing & Availability (866) 342-3721 Splice Tray, 24 Position, FibrLok FST-D-3   Call For Pricing & Availability (866) 342-3721 Splice Tray, 24 Position, Bare Fusion FST-D-FT Call For Pricing & Availability (866) 342-3721 Splice Tray, 24 Position, Heat Shrink Fusion FST-D-HS Call For Pricing & Availability (866) 342-3721 Splice Tray, 24 Position, Mechanical FST-D-MT Call For Pricing & Availability (866) 342-3721 Splice Tray, 24 Position, Northern Telecom QPAK FST-D-NT Call For Pricing & Availability (866) 342-3721 24 Position, Universal Raychem Chip FST-D-RCM Call For Pricing & Availability (866) 342-3721 Splice Tray, 24 Position, Rotary FST-D-RT Call For Pricing & Availability (866) 342-3721 Splice Tray, 24 Position, Universal Raychem FST-D-URCM Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, Bare Fusion, 11.75" FST-FT Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, Heat Shrink Fusion FST-HS Call For Pricing & Availability (866) 342-3721 Splice Tray, 18 Position, with (3) 6 Position Chips, Heat Shrink Fusion FST-HS-3 Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, Mechanical (Elastomeric) FST-MT Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, Northern Telecom QPAK FST-NT Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, Fiberlign Fusion FST-PLP Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, Raychem Universal Chip FST-RCM Call For Pricing & Availability (866) 342-3721 Splice Tray, 12 Position, Rotary FST-RT Call For Pricing & Availability (866) 342-3721

 

 

Home | Cables | Switches | Contact Us | Our Team | Locations