|
MPO Cassettes-MPO Fiber Optic Cassettes- MPO Fiber Optic Cassette Module- Multimode MPO Cassettes- Single Mode MPO Cassettes
FIBER OPTIC Cable ASSEMBLY- Fiber Optic Patch Cord PRICING BELOW
Indoor Outdoor Fiber Optic Jumpers- Fiber Optic Assemblies-Indoor Outdoor Cables
Our MPO fiber optic cassetes are a high density preterminated fiber optic system designed exclusively for data centers, storage area networks, and local area networks. This system allows for maximum density in limited spaces while reducing installation time by 75%. MPO fiber optic cassette modules act as a transition point between backbone cables terminated with 12 fiber MPO connectors.
Our MPO fiber modules allow up to 72 fibers to be terminated in only one rack space, reducing rack space requirements by two thirds over a conventional field terminaed fiber backbone. These modules allow valuable rack space to be maximized for high density systems.
A preterminated MPO cassette system can reduce installation time by 75%. Cable termination is performed in the factory, leaving only the installation of the cables and modules. Factory termination guarantees the best connector quality, insertion loss, and overall performance. All system components are 100% optically tested at the factory making field testing unneccesary.
High Density 12-Fiber MPO Cassette Modules
Fiber Optic Plug and Play (PnP) cassettes are designed with pre-terminated fiber and multi-fiber Plug-in Connectors (MPO). They allow the quick addition of new devices in a computerized system, without the need for reconfiguration or manual installation of other external devices. Internally, each fiber is routed and connected within the cassette to its appropriate port on the front end of the unit. Using ICC's fiber cassettes allow the end user to save significant amounts of time.
We have instock most on the fiber optic assemblies and fiber optic patch cables listed below. ATS provides the highest level of fiber optic patch cords connectivity for all your fiber interconnect applications. Manufactured and tested to the tightest specifications, Bour patch cords exceed Telcordia GR-326 requirements. Our precision zirconia ferrules and environmentally rugged connectors and cable assemblies ensure lasting, repeatable connections.Our fiber optic patch cables are optically tested and visually inspected to ensure that fiber optic return loss, insertion loss, and end-face geometry requirements are satisfied. Our proprietary fiber optic connector polishing processes and fiber optic cable assembly techniques provide minimal back reflection and ultra low insertion loss. All ATS supplier facilities worldwide are ISO 9000 registered. American Tech Supply also carries military grade fiber optic assemblies. These military grade fiber optic assemblies use M28876-27 Connectors offer rugged military and industrial multifiber optical connectors for shipboard, indoor and outdoor requirements. These connectors are designed to perform in a wide range of environmental conditions. Plugs and receptacles have several key options to prevent configuration problems in systems using multiple connectors. The M28876 series products are available with cadmium-plated aluminum and stainless steel. For less critical environments, an aluminum with cadmium plate over electroless nickel may be used. Stainless steel may be an excellent solution for applications where contact with salt spray and other corrosive elements is possible. The M28876 series of connectors uses the M29504/14 & /15 terminals.
American Tech Supply Now stocks the newest 10 gigabit fiber optic cable assemblies, multifiber assemblies,MTP fiber optic assemblies, indoor outdoor fiber optic assemblies, mode conditioning fiber optic assemblies and of course we welcome all custom fiber optic assmblies- info.
American Tech Supply can normally ship all our fiber optic jumpers and fiber optic assmblies below the SAME DAY- provided we get your order before 1pm Pacific Time. We GUARANTEE THE LOWEST PRICES ON ALL OUR FIBER OPTIC PATCH CABLES incuding our singlemode jumpers, multimode jumpers, LC jumpers, ST jumpers, SC jumper, MTRJ jumpers, custom fiber optic assemblies-and fiber optic adapters.
ATS also offer EXTREME DISCOUNTS for all fiber optic assembly orders over 50 pcs. Some discounts for single mode jumpers aand multimode jumpers can befrom 50% to 75% on orders for 50pcs and more.We offer even more discounts for ORDERS OF 100 PCS AND MORE-AT ONE TIME. Call us for additional savings. American Tech Supply also can provide you with most custom assemblies with 24 hour turnaround. Call us for quantity discount pricing. American Tech Supply will meet or beat any written quote from any supplier in the United States! We are American Operated!!
Please see our Indoor Outdoor FIBER OPTIC Jumper-Patch Cords Pricing Below All of our fiber optic assemblies below can be shipped the same day- if the order is placed before 1pm Pacific Time. Custom fiber optic cable assemblies take 1-3 days to ship in order to meet specific requirements and specifications.WE WILL MEET OR BEAT ANY US BASED QUOTE ON FIBER OPTIC CABLE ASSEMBLIES WITHOUT SACRIFICING QUALITY!!
We specialize in building custom fiber optic cable assemblies to meet specific requirements and specifications. You can choose from assorted fiber optic cables and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performance. As with all of our fiber optic cable assemblies, all multifiber fiber optic cable assemblies are individually inspected and tested for optical performance. In addition, we can provide CAD drawings to help you with the installation. To ensure the products' performance, our manufacturing process utilizes high quality fiber optic connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber optic cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.
West Coast Sales (866) 342-3721 East Coast Sales (866) 650-3282 American Tech Supply stocks thousands of singlemode fiber optic jumpers and singlemode fiber optic assemblies in several types including ST and SC singlemode patch cables along with a complete assortment of fiber optic patch cords including LC singlemode, SC singlemode jumpers, and ST singlemode jumpers and adapters. Our singlemode jumpers, single mode patch cables and single mode assemblies come are available in a variety of sizes. To ensure the products' performance, our manufacturing process utilizes high quality connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations. American Tech Supply also can provide you with most custom assemblies with 24 hour turnaround. Call us for quantity discount pricing. American Tech Supply will meet or beat any written quote from any supplier in the United States! We are American Operated!!
We specialize in building custom cable assemblies to meet specific requirements and specifications. You can choose from assorted cables and connectors from different manufacturers. We can terminate the connector in many different ways, which will save you money without comprising performance. As with all of our fiber optic cable assemblies, all multifiber cable assemblies are individually inspected and tested for optical performance. In addition, we provide CAD drawings to help you with the installation. You can choose from assorted fiber optic cables and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performanceTo ensure the products' performance, our manufacturing process utilizes high quality fiber optic connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber optic cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.   SEE FIBER OPTIC Jumper Pricing BelowWe carry a complete line of Fiber Optic Jumpers , Patch Panels, Fiber Optics Adapters, Singlemode & Multimode SC, ST, FC, LC, MTRJ Fiber Optic Jumpers, Fiber Optic Rack Mount Enclosures and Fiber Optic Enclosures.
Call Our Offices At (866) 342-3721 For Discounted Pricing and Custom Product Ordering- We can make fiber optic patch cords for singlemode jumpers & multimode jumpers and assemblies at any length. We normally have a 1-2 day turn around for 'custom' orders
Fiber Optic Assemblies - Fiber Optic Enclosures Call Our Knowlegeable Friendly Customer Service Reps At (866) FIBER-21
"Don't Gamble With Quality- Buy American" To
meet the growing demand for quality fiber optic solutions, American Tech Supply
offers a wide range of reliable and affordable fiber optic products. As we move
towards the future, our fiber manufacturer partners seek to solve problems in
today's crowded telecom room and work area by providing small form factor (SFF)
solutions. Our fiber work area outlet boxes fill the need for a smooth transition
in bringing fiber to the desktop. The addition of fiber optic MT-RJ products in
1999, followed by the incorporation of LC products in 2001, shows our commitment
to providing complete quality fiber solutions for all your needs. Designed to save both time and money, our fiber optic solutions are versatile and competitively priced. From the telecom room to the work area, we provides dependable, cost-effective Fiber Optic Solutions.When challenged to find reliable Fiber Optic Solutions for your business or customer, turn to ATS, where Quality Is Always Affordable.
Singlemode Assemblies-Multimode Assemblies Pricing Pricing As Of
Indoor Outdoor Fiber Jumpers-Indoor Outdoor Fiber Optic Jumpers- Indoor Outdoor Fiber Optic Patch Cords- Indoor Outdoor Fiber Optic Patch Cables- Indoor Outdoor Fiber Optic Patch Cables- Outdoor Indoor Fiber Optic Assemblies- Outdoor Indoor Fiber Optic Patch Cords- Indoor Outdoor Fiber Optic Jumpers- Outdoor Rated Fiber Optic Assemblies- Outdoor Rated Fiber Optic Patch Cords- Outdoor Rated Fiber Optic Assemblies- Outdoor Rated Fiber Optic Jumpers- Indoor Outdoor Fiber Optic Assembly- Indoor Outdoor Singlemode Fiber Optic Jumpers- Indoor Outdoor Singlemode Fiber Optic Assemblies- Indoor Outdoor Singlemode Fiber Optic Patch Cords- Indoor Outdoor Singlemode Fiber Optic Patch Cables- Indoor Outdoor Multimode Fiber Optic Jumpers-Indoor Outdoor Multimode Fiber Optic Jumpers-Indoor Outdoor Single mode Fiber Optic Jumpers-Indoor Outdoor Single mode Fiber Optic Jumpers-Indoor Outdoor Single mode Fiber Optic Patch Cords- Indoor Outdoor Singlemode Fiber Optic Patch Cables-Indoor Outdoor Single mode Fiber Optic Assemblies
Besides The Fiber Optic Patch Cords and Fiber Optic Jumpers Lised Above- we carry all the fiber optic patch cords and fiber optic jumpers below ST
fiber optic patch cable SMA
fiber assemblies D4
optical fiber assemblies
Multimode 62.5/125 micron Duplex Fiber Optic Cable Assemblies
BRIEF OVER VIEW OF FIBER OPTIC CABLE ADVANTAGES OVER COPPER: •
SPEED: Fiber optic networks operate at high speeds - up into the gigabits In recent years it has become apparent that fiber-optics are steadily replacing copper wire as an appropriate means of communication signal transmission. They span the long distances between local phone systems as well as providing the backbone for many network systems. Other system users include cable television services, university campuses, office buildings, industrial plants, and electric utility companies.A fiber-optic system is similar to the copper wire system that fiber-optics is replacing. The difference is that fiber-optics use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information down copper lines. Looking at the components in a fiber-optic chain will give a better understanding of how the system works in conjunction with wire based systems. At
one end of the system is a transmitter. This is the place of origin for information
coming on to fiber-optic lines. The transmitter accepts coded electronic pulse
information coming from copper wire. It then processes and translates that information
into equivalently coded light pulses. A light-emitting diode (LED) or an injection-laser
diode (ILD) can be used for generating the light pulses. Using a lens, the light
pulses are funneled into the fiber-optic medium where they transmit themselves
down the line.Think
of a fiber cable in terms of very long cardboard roll (from the inside roll of
paper towel) that is coated with a mirror. Multimode fiber gives you high bandwidth at high speeds over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. Typical multimode fiber core diameters are 50, 62.5, and 100 micrometers. However, in long cable runs (greater than 3000 feet [914.4 ml), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission. The use of fiber-optics was generally not available until 1970 when Corning Glass Works was able to produce a fiber with a loss of 20 dB/km. It was recognized that optical fiber would be feasible for telecommunication transmission only if glass could be developed so pure that attenuation would be 20dB/km or less. That is, 1% of the light would remain after traveling 1 km. Today's optical fiber attenuation ranges from 0.5dB/km to 1000dB/km depending on the optical fiber used. Attenuation limits are based on intended application. The applications of optical fiber communications have increased at a rapid rate, since the first commercial installation of a fiber-optic system in 1977. Telephone companies began early on, replacing their old copper wire systems with optical fiber lines. Today's telephone companies use optical fiber throughout their system as the backbone architecture and as the long-distance connection between city phone systems. Cable television companies have also began integrating fiber-optics into their cable systems. The trunk lines that connect central offices have generally been replaced with optical fiber. Some providers have begun experimenting with fiber to the curb using a fiber/coaxial hybrid. Such a hybrid allows for the integration of fiber and coaxial at a neighborhood location. This location, called a node, would provide the optical receiver that converts the light impulses back to electronic signals. The signals could then be fed to individual homes via coaxial cable. Local Area Networks (LAN) is a collective group of computers, or computer systems, connected to each other allowing for shared program software or data bases. Colleges, universities, office buildings, and industrial plants, just to name a few, all make use of optical fiber within their LAN systems. Power companies are an emerging group that have begun to utilize fiber-optics in their communication systems. Most power utilities already have fiber-optic communication systems in use for monitoring their power grid systems.
Call ATS Today at (866) FIBER-21 or (866) 342-3721 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
©copyright 2009 American Tech Supply
HOW TO EXTEND YOUR ETHERNET SIGNAL MORE THAN 300 FEET USING FIBER OPTIC CABLE
CALL
(866)
342-3721
Call Us For Military Spec Fiber Assemblies and Connestors-MIL-C-28876 Connector Systems 
Quick-turn multi-fiber assemblies are available in 50/125, 62.5/125 and 9/125 singlemode configurations for ST, SC, LC, MT-RJ and FC connectors. 10 Gbps 50/125 and MTP® trunk solutions are included in our Enterprise line, for these 2 items only.
