Please Call For Pricing Due To Oil & Resin Prices- We have 100% Best Price Guarantee On Most Innerduct- (866) 650-DATA (866) 650-3282
American Tech Supply can supply you with Low Smoke Zero Halogen Duct and LSZH innerduct in
RISER - ZERO HALOGEN CONDUIT.UL Listed in the USA and Canada.
The ENDOCOR RISER -Low Smoke ZERO HALOGEN CONDUITS and LSZH innerducts are specifically designed for use in premise and rapid transit
applications that require zero halogen content and flame retardance requirements.
To achieve flame retardance, many conduits utilize compounds that contain halogens such as chlorine and fluorine.
In a fire, these compounds release an acid gas, which is extremely corrosive and potentially damaging to sensitive
electronic equipment.
The Endot ENDOCOR RISER - ZERO HALOGEN CONDUIT halogen free conduit system minimizes acid gas generation
thus minimizing corrosivity for these sensitive applications.
In addition ENDOCOR RISER - ZERO HALOGEN CONDUIT is corrugated for the lowest pulling friction and greatest degree
of flexibility and is available in either standard orange or white color (special colors available - minimum amounts
may apply).
A UL Listed Polyester pull tape is standard in all sizes.
ENDOCOR RISER - ZERO HALOGEN CONDUIT provides an easy method of cable installation and cable protection.
. Applicable Specifications: Product Name: Endocor RI, UL Listed Riser Raceway Product Use: Conduit for Fiber Optic Cables used in Building wiring applications Chemical Name Base Resin: Nylon 6 Copolymer Resin Chemical Family: Natural Thermoplastic Nylon 6 Impact Modified Resin
ACCEPTANCE CRITERIA
TEST METHOD
VALUE
UL STANDARD 2024 (UL TEST 1666)
Maximum Flame Propagation Height
UL 2024, sec. 9
4.25 ft.
Maximum Damage Height
UL 2024, sec. 9
6.75 ft.
MECHANICAL PROPERTIES
Tensile Strength, Yield
ASTM D638
7,800 PSI
Flexural Modulus
ASTM D790
9,200 PSI
THERMAL PROPERTIES
Melting Point
ASTM D789
420 F
ENDOCOR RISER - ZERO HALOGEN CONDUIT is available as a CORRUGATED conduit in sizes from
½" through 2".
PART NUMBER CHART FOR ZERO HALOGEN RISER CONDUIT
TYPE CLASS Type of Innerduct NOMINAL REEL TAPE/ROPE COLOR
DIAMETER /COIL
I RI = RISER INNERDUCT 050 = 1/2" 21 = WOOD 34" 17 = UL Listed 900# WK 2 = ORANGE
I RS = RISER SPLIT 075 = 3/4" 22 = WOOD 48" 7 = WHITE
100 = 1" 23 = WOOD 78"
125 =1 1/4" 24 = WOOD 84"
150 =1 1/2" 41 = COIL
200 = 2"
BOLD LETTER AND NUMBERS ARE THE PART NUMBER LIGHTER TYPE IS ONLY A DESCRIPTION
PART NO. O.D. I.D.
I RI 050 0.850” (2.16 cm) 0.650” (1.65 cm)
I RI 075 1.125” (2.86 cm) 0.850” (2.16 cm)
I RI 100 1.400” (3.56 cm) 1.050” (2.67 cm)
I RI 125 1.600” (4.06 cm) 1.250” (3.18 cm)
I RI 150 1.900” (4.83 cm)` 1.500” (3.81 cm)
I RI 200 2.350” (5.97 cm) 1.900” (4.83 cm)
This Maxcell innerduct lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.American Tech Supply now carries Maxcell's new fabric innerduct which is similar to the Maxcell fabric innerduct but has several major differences to the Maxcell innerduct product which will be covered below. Maxcell is the very popular fabric innerduct product that have successfully offered several advantages over standard HDPE especially offering up to 80% fill ratios over standard innerduct. Maxcell also has several differences over innerduct in the type of composite materials that it is manufactured from as well as the type of cellular structure.
MULTICELL Innerduct-We can customize this product to meet your specific project needs; be it 7-way, 5-way, 4-way, 3-way or 2-way. We can package MicroDucts in an oversheath configuration for aerial, conduit, or buried applications to meet your specific needs. Versatility Fiber technology is constantly changing. By installing only the fibers you need today, you have the opportunity to utilize the latest in fiber technology as it becomes available in either a MicroCable or Blown Fiber configuration.
MULTICELL DUCT BY DURALINE
FuturePath®- By Duraline
We can customize this product to meet your specific project needs; be it 7-way, 5-way, 4-way, 3-way or 2-way. We can package MicroDucts in an oversheath configuration for aerial, conduit, or buried applications to meet your specific needs. Versatility Fiber technology is constantly changing. By installing only the fibers you need today, you have the opportunity to utilize the latest in fiber technology as it becomes available in either a MicroCable or Blown Fiber configuration.
Efficiency
By reducing wasted conduit space, MicroTechnology allows maximum utilization of all current and future telecommunications infrastructure.
Enhanced Profitability
MicroTechnology allows maximum cost-effectiveness and greatest return on investment for existing and future right-of-way expenditures.
Network Expansion
By placing several MicroDucts into the larger empty ducts (or a few MicroDucts into occupied ducts), the concerns of future expansion are addressed. Future build-outs will not interrupt existing services.
Enhanced Utilization of Capital
MicroCable comes in sizes ranging from a 2 fiber to 144 fiber count cable. Micro fiber optic cable costs are generally lower. By using the lower fiber count cable, the upfront cost is dramatically less. You would only install the MicroCable as needed to satisfy a customer’s present requirements for capacity. That way, you can keep your investment very closely tied to your present cash flow.
How it can be used...
Your needs are changing and the world is changing. You have to be able to adjust with these changes and our products allow you to do that. Today’s primary markets (Telecom, CATV and Power Utilities) need a future path for growth.
SMOOTHWALL INNERDUCTHigh Density Polyethylene Duct from PNA has been tested and proven under the most severe conditions. From extreme temperatures to abrasive and high tension applications in underground installations. HDPE from PNA provides quality service and economy in a wide range of uses. As a smooth and flexible duct for cable, HDPE is unequaled for ease of installation and continuous strength.
Multicell Installations: ATS Now carries Multicell Innerduct from Optiroad. After years of multicell innerduct and multicell duct proptypes and trials including Foduct which we introduced in California in 1993, Optiroad has designed a flexible, extremely rugged multicell innerdcut system to fit most underground fiber to the home -FTTX- FTTH and multi-fiber requirements to effectively and efficiently reduce the time and effort to install rady to use innerduct. Due to its rugged and sealed nature of the design Optiroad allows the removing and blowing of tape to install fiber cables of larger nature at a later date. COD also facilitates easy insertion of cables up to
the maximum-coiled length owing to perfect alignment of inner ducts and less friction,
as it has no connections.
OPTIROAD Multi-Cell Innerduct
Multicell Innerduct Now American Tech Supply introduces the world's most advanced multi-cell innerduct ideal for multiple fiber cable runs and ease of installation. Optiroad multicell innerduct has been used internationally for over 10 years with huge success for standard multiple fiber cable runs along with FTTH-FTTX fiber cable innerduct installations. Optiroad innerduct is also designed for earthquake resist as Optiroad innerduct has been proven safe in Earthquake and Land Subsidence owing to its strong compressive load and flexibility.
PVC INNERDUCT: American Tech Supply now carries a complete line of PVC innerduct as well.-Call For Info. Also much of our new 2 inch- 3 inch and 4" HDPE innerduct is now in stock. All Schedule 40. 80 and related duct hipped from Ohio, Texas, Tampa, FL and Utah. PVC Duct
THE
BELOW PRICES ARE TYPICAL SUGGESTED PRICES- DUE TO THE PRICE OF OIL-
THE PRICES CAN FLUCTUATE DAILY-PLEASE CALL (866) 342-3721 FOR UP
TO DATE PRICING- WE TRY AND SHIP COILED 250 FOOT AND 500 FOOT PLENUM
INNERDUCT SAME DAY!
Call us for a quote at (866) 342-3721
We are now QUOTING & Shipping HDPE 1"-2"-3"-4" HDPE Innerduct:
ROCKAWAY, NJ - We also specialize in last minute rapid turnaround and delivery. our new corrugated slit duct is made of low-density polyethylene plastic for greater flexibility when joining and racking innerducts. Easy to use, it slides readily over fiber optic cable and inside innerduct. The slit duct is offered in 250-foot lengths that can be cut for application in the field. It is available in high-visibility orange in sizes from 1/2" ID through 2" ID.innerduct, corrugated inneduct, and plenum innerduct that is also ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct.
BELOW PRICES ARE TYPICAL SUGGESTED PRICES- DUE TO THE PRICE OF OIL, PRICES CAN FLUCTUATE DAILY-PLEASE CALL (866) 342-3721 FOR UP TO DATE PRICING
Part Number
Description
Packaging
List Price- Please Call For Discounts
ICS 050 41 01 02-250
1/2 " Corrugated Split Duct
250 Foot Coil
$ .45 Foot
ICS 075 41 01 02-250
3/4" Corrugated Split Duct
250 Foot Coil
$ .55 Foot
ICS 100 41 01 02-250
1" Corrugated Split Duct
250 Foot Coil
$ .68 Foot
ICS 125 41 01 02-250
1 1/4" Corrugated Split Duct
250 Foot Coil
$ .85 Foot
ICS 150 41 01 02-250
1" Corrugated Split Duct
250 Foot Coil
CALL
ICS 150 41 01 02-250
1" Corrugated Split Duct
250 Foot Coil
CALL
Please note due to the ever changing prices of oil per barrel, prices may fluctuate and are subject to change so please call first for the very latest in price changes. You may phone us tollfree at (866) 342-3721 or click on the chat button at the top of the page to talk with one of our representatives.
American Tech Supply also carries HDPE -high density polyethylene innerduct in sizes ranging from 1/2" to 6" and is avaialable ina multitude of colors. Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.
ATS also carries Ribbed wall innerduct which innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.
Our Tracer wire innerduct provides a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.
UL Listed-We Now Offer Pre- Installed Fiber Cable In Our Innerduct
Ask Us For Details- (866) 342-3721 or (727) 547-2200
ATS can ship many HDPE innerduct and HDPE duct products the same day, however on special orders and colors please be advised that we require 7-10 days to process your innerduct order. Thank you.
1/2" TO 6" Innerduct Diameter Sizes
Colors and Identification
Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.
Other Identification
Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
Custom imprints such as company name, project name or any other special identification markings also available
Options
Lubrication
Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
Pre-installed pull tape, tracer tape
Smooth Wall Innerduct 1/2" to 6" Diameter
Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.
Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Our ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.
Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.
Figure 8 DuctSmooth Wall Innerduct 1/2" to 6" Diameter
Our figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct.
Plenum Available at 1-1/2" and HDPE Innerduct Available in 1/2" to 6" Sizes
Call Us at (866) 342-3721 or (866) 650-3282
Pricing for 1" & 1.25" Plenum Innerduct- Is In "RED"
[Prices do not include shipping, FOB point PA]
Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.American Tech Supply provides turnaraound for corrugated innerduct by providing rapid shipping service that we have in stock including a complete Line of ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. Our plenum innerduct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is tandard. Custom options, such as multiple colors per reel and Slit Duct, are also available.This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
Part No
Description
Ft
Price
P-100T-5000
1" Plenum Innerduct w/tape [REEL]
5000
$7650.00
P-100T-1000
1" Plenum Innerduct w/tape [COIL]
1000
$1550.00
P-100T-500
1" Plenum Innerduct w/tape [COIL]
500
$780.00
P-100T-250
1" Plenum Innerduct w/tape [COIL]
250
$399.00
P-125T-5000
1 ¼” Plenum Innerductw/tape [REEL]
5000
$8700.00
P-125T-1000
1 ¼” Plenum Innerductw/tape [COIL]
1000
$1795.00
P-125T-500
1 ¼” Plenum Innerductw/tape [COIL]
500
$899.00
P-125T-250
1 ¼” Plenum Innerductw/tape [COIL]
250
$479.00
Pricing for 1" & 1.25" HDPE Innerduct *HDPE orders under 5000 ft subject to a $60.00 reel charge, Coil prices listed
Part No
Description
Ft
Price
PEC-100T-5000
1" HDPE Innerduct w/tape [REEL]
5000
$1449.00
PEC-100T-1000
1" HDPE Innerduct w/tape [COIL]
1000
$289.00
PEC-100T-500
1" HDPE Innerduct w/tape [COIL]
500
$145.00
PEC-100T-250
1" HDPE Innerduct w/tape [COIL]
250
$72.50
PEC-125T-5000
1 ¼” HDPE Innerductw/tape [REEL]
5000
$1465.00
PEC-125T-1000
1 ¼” HDPE Innerductw/tape [COIL]
1000
$299.00
PEC-125T-500
1 ¼” HDPE Innerductw/tape [COIL]
500
$175.00
PEC-125T-250
1 ¼” HDPE Innerductw/tape [COIL]
250
$79.00
Pricing for 1-1/2" Plenum & HDPE innerduct - For Larger Diameter Sizes- Please Call (866) 342-3721 First Due To The Fluctuating Oil and Resin Wholesale Prices
Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.
American Tech Supply is a supplier of Innerduct, OSP, HDPE, Riser Rated Innerduct, Plenum Innerduct, Corrugated duct, Outside Plant Conduit, Fiber Optic Duct, ETL Verified Conduit
Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. It¹s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
** Core rebates are available for reels broken down and returned to the manufacturer. Call our offices for details
Prices reflect COD and do not include shipping or processing fees. Please add a 3% minimum charge for all credit card orders.
American Tech Supply also carried a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Rise Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Preimier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Plenum duct is offered in 1" and 1 1/4" with pre-installed pull tape for easy cable installation. The standard color is orange yet it is offered in a variety of other colors. Sequential marked footage is standard and custom options, such as multiple colors per reel and Slit Duct, are also available.
We can deliver a 500 Foot Reel of Innderduct to Most Locations In the United States For about $150.00
Per 500 Foot Coil
"Contractor Installed the wrong duct & fiber needs to be installed this weekend?
"Your local distributor has no duct in stock or has the wrong duct and needs it right away?"
"You have everything, the fiber cable, testers, jacks, but the duct- and you need it right away?"- We specialize in Rapid- 24- 48 Hour Turnaround- Call us today at (866) 650-DATA or (727) 547-2200 or click on the chat button at the top of the page
Cable Guide fabric innerduct that is equivalent to Maxcell allows you to place the maximum number of cables in any type of conduit network structure.
By taking the shape of the cables placed within, Cable Guide allows you to utilize up to 80% of available duct space
.jpg)
Multicell Installations
American Tech Supply also carries HDPE -high density polyethylene innerduct in sizes ranging from 1/2" to 6" and is avaialable ina multitude of colors. 
ATS also carries Ribbed wall innerduct which 
Our Tracer wire innerduct provides a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.
Pricing for 1" & 1.25" Plenum Innerduct- Is In "RED" 
New 85% Fill Ratio Cable Guide
.jpg)
.jpg)
