MRV Products Fiber Optic and GMX Products
Multimode Fiber-Optic Modules MRV provides a wide variety of SFP and
GBIC modules for fiber optic communications, including data and video support.
Multimode optical interfaces (generally 850nm) are designed for short distance,
low cost communications. Multimode SFPs are used in several applications:
- Copper-to-Fiber - using an pluggables-based media converter, a switch or
router with copper interfaces can be attached to multimode fiber optic cabling
to reach longer distances (for example up to 500m for Gigabit Ethernet, as
opposed to 100m for copper)
- Connect to a switch or router with a multi-mode interface, and then,
through a Media Converter, convert to singlemode. This allows traditionally
short-distance systems to extend to long distances.
- In WDM systems, it is required to convert the signal from the host system
(switch or router) to a specific wavelength. Since the host system is often a
multimode fiber (especially in high-speed Ethernet, Fibre Channel, and SONET
applications), it is important to have a multimode fiber optic connection
option to the WDM system.
Extended Multimode (MMX) Fiber-Optic
Modules MRV provides a unique Multimode Extension (MMX) solution to
extend the reach of high-speed data networking protocols over traditional
multimode fiber. FDDI networks (100Mbps) allowed up to 2km rings to be created,
which led to a large number of 2 km fiber plant installations in campus
environments. MMX technology can extend Gigabit Ethernet beyond 2 km, allowing
simple upgrades of FDDI backbone networks to Gigabit Ethernet. The typical usage
of MMX pluggables would be in a media converter to connect a copper or standard
multimode system to 2 km fiber link.
Single-Mode Fiber-Optic
Modules MRV provides an enormous range of single-mode fiber optic
provides an enormous range of single-mode fiber optic interfaces in the SFP form
factor, including solutions for virtually every known data and video protocol,
and even protocol independent solutions. Single-mode SFPs and GBICs are used in
a variety of applications:
- Copper-to-Fiber - using an SFP-based media converter, a switch or router
with copper interfaces can be attached to single-mode fiber optic cabling to
reach extremely long distances (for example up to 80km for Gigabit Ethernet,
as opposed to 100 m for copper or 500 m for multimode fiber)
- Distance extension - in an SFP-based signal repeater/regenerator, two
single-mode SFPs are used to extend the distance of fiber optic links up to
hundreds of kilometers.
- Connect to a switch or router with a multi-mode interface, and then,
through an SFP-based Media Converter, convert to single-mode. This allows
traditionally short-distance systems to extend to long distances.
- In WDM systems, it is required to convert the signal from the host system
(switch or router) to a specific wavelength. In some cases, the host system is
a single-mode fiber (especially in SONET OC-48 applications), so it is
important to have a single-mode fiber-optic connection option to the WDM
system.
Single Fiber Solutions MRV provides a unique
capability of both transmitting and receiving data on a single fiber. This
feature is critical for many Fiber-to-the-X (FTTX) environments, where a single
fiber is laid to each customer. MRV's single-fiber solutions cover a range of
protocols and distances, and even include single- fiber WDM. For Ethernet
applications, MRV provides SFP modules that directly connect to a bi-directional
fiber interface. MRV Also provides a wide variety of specialty patch cables to
combine wavelengths and multiplex transmit and receive
signals.
Products
|
|
MRV Products
By Category
Out-of-Band Console & Power Management
Pluggables
Wave Division Multiplexing
By Product Line
OptiSwitch
TereScope
Pluggables Cost
Savings
Pluggables Technology
Pluggables Products
Pluggables Systems
Pluggables Solutions
|