Outside Plant OSP

About Us
cable, vdsl, patch

 

Polymer Concrete Enclosures-Polymer Concrete VaultsOutside Plant Products-Above Grade Enclosures- Outside Plant Cable- Underground Vaults-Grade Level Enclosures-Pull Boxes-Handholds- Underground Enclosures- OSP Enclosures

Ask about our USA Made CAT6- CAT 6A and CAT 7 Patch Cords

American Tech Supply is now a proud distributor of New Basis OSP Vaults and enclosures.These enclosures have polymer concrete sides, rings and covers. The sides and rings are wrapped with fiberglass mesh inside and out.Tapered enclosures have sides that flare out. Advantages include: more interior space in the enclosure, resistance to frost heave and efficiency of shipping (tapered enclosures typically nest allowing more to fit on a pallet than straight sided enclosures.Fiberglass enclosures have fiberglass sides with cast on polymer concrete rings and covers. They are available rectangular or round, and many are available with tapered sides. These enclosures offer our highest strength to weight ratios and meet or exceed the same load performances as enclosures made entirely of polymer concrete.  

Polymer Concrete Enclosures

POLYMER CONCRETE
These enclosures have polymer concrete sides, rings and covers. The sides and rings are wrapped with fiberglass mesh inside and out, in accordance with many State Departments of Transportation (DOT’s). Sizes are expressed as Width X Length X Depth in inches. For example 17X30X24 is a 17” by 30” cover on a 24” enclosure.
Tapered:
Tapered enclosures have sides that flare out. Advantages include: more interior space in the enclosure, resistance to frost heave and efficiency of shipping (tapered enclosures typically nest allowing more to fit on a pallet than straight sided enclosures).
06" x 08" x 06"
11" x 18" x 12"
11" x 18" x 18"
12" x 12" x 12"
12" x 12" x 24"
13" x 24" x 12"
13" x 24" x 15"
13" x 24" x 18"
17" x 30" x 18"
17" x 30" x 24"
24" x 36" x 18"
24" x 36" x 24"
24" x 36" x 36"
24" x 36" x 48"
30" x 48" x 18"
30" x 48" x 24"
30" x 48" x 30"
30" x 48" x 36"
30" x 48" x 48"
36" x 60" x 24"
36" x 60" x 36"
48" x 48" x 48"
48" x 96" x 48"
   

 

 

 

 

 

 

 




FIBERGLASS / POLYMER CONCRETE

FIBERGLASS/POLYMER CONCRETE
These enclosures have fiberglass sides with cast on polymer concrete rings and covers. They are available rectangular or round, and many are available with tapered sides. These enclosures offer our highest strength to weight ratios and meet or exceed the same load performances as enclosures made entirely of polymer concrete.

For rectangular enclosures sizes are expressed as Width X Length X Depth in inches. For example 17X30X24 is a 17” by 30” cover on a 24” enclosure..

For round enclosures sizes are expressed as Diameter of Cover X Depth in inches. For example a 22x00x36 is a 22” diameter cover on a 36” deep enclosure.

These dimensions are nominal, for exact dimensions see drawing.
Round:
Round enclosures work well for coiling extra cable or fiber in the enclosure. Round enclosure holes can be “auger dug,” and round covers can never fall inside the enclosure!
13" x 24" x 12"
13" x 24" x 12"
13" x 24" x 18"
13" x 24" x 18"
17" x 30" x 12"
17" x 30" x 12"
17" x 30" x 18"
17" x 30" x 18"
17" x 30" x 24"
17" x 30" x 24"
17" x 30" x 30"
17" x 30" x 34"
24" x 36" x 18"
24" x 36" x 18"
24" x 36" x 24"
24" x 36" x 24"
24" x 36" x 36"
24" x 36" x 36"
30" x 48" x 18"
30" x 48" x 18"
30" x 48" x 24"
30" x 48" x 24"
30" x 48" x 30"
30" x 48" x 36"
30" x 48" x 36"
30" x 60" x 30"
36" x 60" x 18"
36" x 60" x 18"
36" x 60" x 30"
36" x 60" x 30"
36" x 60" x 36"
36" x 60" x 36"
Round

 

 

 

 

 

 

 

 

 

 


 

 


 


High Density Plastic

High Density Plastic
These enclosures have high density plastic sides, rings and covers. They are available rectangular or round. Many sizes are available with straight or tapered sides.

For rectangular enclosures, sizes are expressed as Width x Length x Depth in inches. For example 17x30x24 is a 17" by 30" cover on a 24" enclosure.

For round enclosures, sizes are expressed as Diameter x 00 x Depth in inches. For example: 22x00x36 is a 22" round cover on a 36" deep enclosure.

These dimensions are nominal, for exact dimensions see drawing.
Round:
Round enclosures work well for coiling extra cable or fiber in the enclosure. Round enclosure holes can be “auger dug,” and round covers can never fall inside the enclosure
Rectangular
13" x 24" x 15"
14" x 19" x 12"
14" x 20" x 15"
17" x 30" x 15"
17" x 30" x 18"
17" x 30" x 30"
17" x 30" x 36"
 
Round
06" x 00" x 10"
10" x 00" x 10"
   

 

 


 

 

 

 

 

 

 

 




Polymer Concrete Pads

POLYMER CONCRETE
Above ground cabinets require anchoring foundations and a way for cable or wire to enter the cabinet.

NewBasis can engineer pads to accommodate virtually any cabinet, allowing for faster and less expensive field installations.

Please contact customer service so we can design a pad for your application.

 

 

 

 

 

 


Hardware - Nameplates - Accessories

Hardware
This hardware is made of stainless steel or solid brass. Please see individual product drawing for specific material information and dimensions.
Nameplates
These nameplates are designed for all NewBasis Polymer Concrete covers. If you require nameplates for plastic enclosures please contact customer service.
Accessories
These accessories are designed to work with all NewBasis products and covers except cast iron man hole covers. The penta head socket fits the optional, tamper resistant, penta head bolts. Cable arms fit into racks on the inside of enclosures and serve as cable winding posts or as equipment holders.
Hardware
Nameplates
Accessories

 

 

 

 

 

 

 

 

 

 

 

Covers

Covers
NewBasis covers are designed to fit in NewBasis enclosures. Our polymer concrete covers are often used to replace conventional concrete covers which are much more prone to breakage. We recommend test fitting one of our covers if you want to replace covers made by another manufacturer. These covers do not include bolts and washers. If you want hardware select hex head or penta head hardware bolt kit at bottom of available covers.
Covers
PCC1324P1
PCC1324P1
PCC1324P1
PCC1730P1
PCC1730P1
PCC2436P1
PCC2436P1
PCC2436P1
with Power EMS
PCC3048P1
PCC3048P1
PCC3048P1
PCC3048P2
PCC3048P2
PCC3048P2
PCC3660P2
PCC3660P2
SMCC1212P1
?


 

 





 

 

 



Bolt Kits




Outside Plant Products-Outside Plant Cable- OSP Vaults-Underground Vaults-Grade Level Enclosures-Pull Boxes-Handholds- Underground Enclosures- OSP Enclosures- OSP Enclosure Sizes- Most can Ship in 2-3 Days- Polymer Concrete Specifications

New- Protect Your OSP- Below Ground Equipment with Lockjaw! Available At ATS- More Info!

  Polymer Concrete Vaults

Nema Rated Enclosures

Here are our MOST COMMON VAULT SIZES- Lead Times 1-5 Days From Production/Stock to Shipping

Please view our OSP Closure Page with the sizes we carry. Our turnaround with our partner manufacturer in Arkansas will allow you to receive your custom osp vault or osp enclosure in less than one- third of the lead time and at the same time same at least 20%- Call us at (866) 342-3721 and visit our osp dimensions page here.

ATSWAC-1X

SPECIAL! 12 Port Wall Mount Enclosure $68.88 each Huge Selection of NEMA Rated Enclosures

American Tech Supply, a registered CCR contracting supply company has teamed up with Corning, Telect,Pencell, Century, AFL Telecommunications, Commscope,Panduit, Emerson, Knurr, Hoffman, Highline,Draka USA, ADC, Carlon,Telco and several other leading fiber optic osp enclosure equipment manufacturers to offer our contractors, RBOC's, FTTH buildout companies a complete array of OSP underground vaults, underground pull boxes, underground cabinets a & underground boxes at affordable prices. We also national defense fiber optic security systems customers including any defense department or government entity a fiber optic intrusion prevention system called the Fiber Sentinel that will help prevent hackers or malicious intruders to break into our national defense using fiber optic technologies. We also carry a complete array of fiber optic enclosures to house all your fiber optic equipment inside the building as well as outside.

OSP Fiber Vaults - OSP Vaults-Fiber Optic Vaults-FTTH Vaults-FTTH Enclosures- OSP Fiber Enclosures- OSP Enclosures
The Advanced Splice Vault (ASV) is a versatile transition point for splicing optical cables near the cable entrance of a network facility. This low-profile splicing solution provides enhanced cable management, multiple cable entrance points, and a broad range of termination solutions to accommodate today’s dynamic networks.

We now carry Multilink Enclosures!

OSP- Outside Plant Fiber Splice Vaults

Telect’s Advanced Fiber Splice Vault (ASV) provides a lockable, light-weight, metal enclosure for isolating splices between Outside Plant (OSP) cable to IntraFacility Cable (IFC). They are available in three sizes to accommodate from 144 fiber terminations, 288 fiber terminations, 576 fiber terminations up to 864 fiber optic splices. ASVs mount to interior walls or unistruts nearby OSP cable entrance. Cables enter the ASV through knockouts on top, bottom, and/or sides. They can be clamped internally and where necessary grounded to bus bars.

576 Termination Splice Vault

864 Termination Splice Vault

AFL Telecommunications-AFL OSP Enclosures

AFL- AFL Telecommunications Fiber Closures

Just click on any of the OSP fiber optic enclosures below.ATS carries several models of OSP enclosures from several manufacturers including the CMPH which is a versatile OSP closure designed for both new provisioning installations as well as rehabilitation of existing access points housed in metallic enclosures. The CMPH’s superior structural strength, outstanding environmental protection and ease of installation combine to create a long-life housing that reduces operational expenses. Highline Products is proud to introduce a new line of 15”, 24” and 32” transformer pads. Our innovative, patented, design results in a product that is extremely strong and durable, yet lightweight. These products are manufactured at our ISO9000 certified plant using compression molding tools and a specially formulated SMC (sheet molding compound). This process assures consistent product quality as well as other benefits.

 

Fiberglass Underground Vaults- Fiberglass Above Ground Vaults & Enclosures

AFL Telecommunications OSP Closures Pull Boxes

Vaults Transformer Pads OSP Cable

AFL Telecommunications-AFL OSP Enclosures- AFL OSP Fiber Optic Enclosures

AFL-LL-400b Optical Splicing Enclosures

ATS carries several models of OSP enclosures, underground vaults, transformer pads from several manufacturers including the CMPH is a versatile OSP closure designed for both new provisioning installations as well as rehabilitation of existing access points housed in metallic enclosures. The CMPH’s superior structural strength, outstanding environmental protection and ease of installation combine to create a long-life housing that reduces operational expenses.

 

Underground Fiberglass Vaults

Fiberglass vaults Grade Level Enclosures Above Ground vaults

Grade Level Enclosures

Fiberglass Products

Compresson Molded- Spray Up Series- Transformer Pads

Fiberglass /Polymer Concrete

Pullboxes-Underground Vaults-Flat Pad- Barrel For Fiber Cable

Primary Cabinets

Single Phase Cabinets- Teo Phase Cabinet- Three Phase Cabinet

Pole Top Extensions

Plastic HDPE Boxes

Round Body- Rectangular Body

Pedlock OSP Above Ground Enclosures- Fiber Optic Closures

Buried distribution pedestals designed for superior OSP protection of fiber optic splice and storage points

--

Pedlock BDO Series Pedestals are a key element of any FTTP solution. In both greenfield and brownfield fiber deployments, BDO Pedestals provide easy access to branch and drop splice while protecting and storing loose buffer tube fiber optic cables. The exclusive BDO bracket allows technicians to mount splice trays and splitters securely with ample access to perform in-field splicing.
BDO Pedestals feature a non-metallic construction that offers super OSP protection against floods, fire, dirt, insects and impact. An expanded-capacity split base is designed to easily install around conduit-fed cable bundles in new construction (excludes 14” diameter pedestals). BDO pedestals are an ideal solution for rehabilitation of metallic enclosures, and protection of co-located copper/fiber distribution points

Part Number- Product Description
BDO 3-EG- 6” pedestal, split base, G bracket (fiber only), bond bar
BDO 4-EG8-pedestal, split base, G bracket (fiber only), bond bar
BDO 5-EG -10” pedestal, split base, G bracket (fiber only), bond bar
BDO 5-EB -10” pedestal, split base, B bracket (fiber/copper), bond bar
BDO 7-OB-14” pedestal, round base, B bracket (fiber/copper), bond bar

Copper Pedestals & Enclosures


Fiber Pedestals & Enclosures


Multi-Purpose / Co-Location Housings


Apparatus Cases


Line Conditioning / Load Coils


Cable Stubs


Riser Pipes and Wire Guards

Broadband Multiplexers


DSL Systems


T1 Channel Banks

Channel Banks
360-80 Intelligent Channel Bank (ICB)
360/363 Series T1 Channel Banks
D424/D448 Series T1 Channel Banks
VF Products
SurePath™ Automatic Protection Products

T1 Span Termination / Mini-Repeaters

T1
T1 Span Termination System (STS)
Span Termination System
STS Shelves
T1 Mini Repeaters & Plug-in Units
CiAC239A - Sealed T1 Mini Repeaters
CS239 Series T1 Mini-Span Line Repeaters
621155 and 621156 Type 239 Line Repeaters


Digital Pair-Gain Systems

2:1 DuaLine Digital Pair Gain System
4:1 QuadPOTS Digital Pair Gain System
8:1 Digital Pair Gain System
12:1 Digital Pair Gain System


Transmission and Signaling Products


Charles Fiber Pedestals & Enclosures
PEDLOCK® BDO Series Pedestals

---

 

AFL Telecommunications Fiber Closures

NEMA RATED FIBER OPTIC ENCLOSURES We can supply you with a full line of standard and special NEMA rated enclosures and components well suited for Homeland Security Product support. Our own complete fiber-optics product offering can be leveraged in certain cases to minimize lead-time and provide value added solutions in a short time period.

Take a look at the new Cableguide-Textile Duct With 85% Fill Ratios

Cable Guide

Standard Innerduct

View PDF White Paper On Cable Guide here

Cableguide's Ease Of Handling & Installation

Outdoor Rated Copper Telecom Cables:

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

 

cisco systems
Telco Systems
Anritsu
Leviton
telecom supply

 

 

- 2010 All Rights Reserved -

 

   
sides, rings and covers. The sides and rings are wrapped with fiberglass mesh inside and out, in accordance with many State Departments of Transportation (DOT’s). Sizes are expressed as Width X Length X Depth in inches. For example 17X30X24 is a 17” by 30” cover on a 24” enclosur