Polymer Concrete Vaults- List Of OSP CLOSURES-PRICING
All Below Vaults Available for Electrical- Data- Telecommunications- Sewer or Irrigation- Most Vaults- Underground Enclosures Can Be Shipped Within 96 Hours.
Polymer Concrete Vaults- Communications- Electrical- Irrigation Underground Enclosures Shipped Day or Within 96 Hours on Special Orders
SPECIFICATIONS: FIBERGLASS POLYMER CONCRETE-Pull Box, Junction Box, Hand Hole, Splice Box, Vaults and Transformer Pads. SPECIFICATIONS
The pull/splice box ring and cover shall be constructed of polymer concrete consisting of sand and aggregate bound together with a polymer resin. Internal reinforcement may be provided by means of steel, fiberglass, or a combination of the two. The polymer concrete material has the following minimum allowable properties: Ultraviolet Exposure: Tested in accordance with ASTM G-53 using an U.V.A. 340 bulb. Flammability Test: Tested in accordance with ASTM D-635. Accelerated Service: Tested in accordance with Procedure E, ASTM D-757. Water Absorption: Tested in accordance with Procedure E, ASTM D-570, Section 5, 6, 1, and 6.5. Impact Resistance: 72 foot-pounds in accordance with ASTM D-2444 using a “C” Tup. Compressive Strength: 11,000 psi tested in accordance with ASTM C-109 loaded at a rate between 28, 000lbs. to 41, 000 lbs. per minute. Flexural Strength: 7,500 psi tested in accordance with ASTM D-790. Tensile Strength: 1,700 psi tested in accordance with ASTM C-496. Skid Resistance: 0.50 coefficient of friction in accordance with ASTM C-1028. Chemical Resistance: Tested according to ASTM D-543, Section 7, Procedure 1 using the following chemicals:
Sodium Chloride 5%
Sulfuric Acid 0.1n
Hydrochloric Acid 0.2N
Sodium Sulfate 0.1N
Sodium Carbonate 0.1N
Sodium Hydroxide 0.1N
Transformer Oil Per ASTM D-543
Kerosene Per ASTM D-543
MATERIALS: BASE Thickness Tolerance +/- 1/16” to 1/8” Flexural Strength 17,000-18,000 psi Flex Modulus .59-.65 psi x 106 Tensile Strength 9,100-10,500 psi Impact Strength (notched Izod) 15-17 ft lbs/inch Glass Length 1” random orientation Resin Type Non-Isopthalic Filler gypsum Water Absorption <1%
The standard product line is designed and manufactured to perform to and comply with the following standards for loading:
Western Underground Committee Recommended guide 3.6 for 10,400# loading for incidental, non deliberate light vehicular traffic.
ANSI/SCTE 77 2007 Tier 8 (12,000# Test Load) Tier 15 (22,500# Test Load) and Tier 22 (33,750# Test Load) Specification for Underground Enclosure Integrity.
Polymer concrete/polymer concrete-fiberglass products are not intended for use in constant traffic areas.
The following test methods have been used in evaluating the physical and chemical properties of the hybrid fiberglass/polymer concrete product line:
Impact Properties (Izod) ASTM D 256 ASTM D 2444 Compressive Strength ASTM C 109 Tensile Strength ASTM C 190 Flexural Strength ASTM C 293 Chemical Resistance ASTM D 543 Simulated Sunlight ASTM D 1501 Vicant Softening Temperature ASTM D 1525 Water Absorption ASTM D 570 Ultra Violet Resistance ASTM G 53 Brittleness Temperature ASTM D 746 Flammability ASTM D 635 Static Coefficient of Friction ASTM C 1028
What is Polymer Concrete?
Polymer concrete is similar to conventional concrete in that it contains selected blends of aggregates and fillers which are held together utilizing a binder. The aggregates include silica, quartz, granite, limestone, and other high quality material. Conventional concrete uses a combination of cement and water for the binder. In polymer concrete the binder is a high strength, corrosion resistant, thermosetting resin. This resin system requires a curing agent (catalyst) which when combined with the resin, transfers the resin and curing agent from a liquid to a solid (thermoset polymer) which bonds to the aggregate, various fillers and internal reinforcement. The polymer concrete is reinforced with fiberglass for superior strength and rigidity.
Lightweight-as much as 90% lighter than concrete enclosures of the same size
Cost effective-usually lower installed cost and low life cycle costs.
Non- conductive and non-flammable-polymer concrete and fiberglass do not conduct electricity, therefore affording a high degree of safety.
Corrosion resistant
Good long-term durability with respect to freeze and thaw cycles.
Rapid curing at ambient temperatures.
High tensile, flexural, and compressive strengths.
Corrosion resistant-resistant to alkaline, acids, weathering and aggressive solutions.
Standard Duty 10K Enclosures
Heavy Duty-20K Enclosures
Part Number
List Price
Trade Price
ATS Price
Call Please
Part Number
List Price
Trade Price
ATS Price
Call Please
10
x
15
ATS101512S
Box & Cover Assy
ATS101512H
Box & Cover Assy
ATS1015S
Cover
ATS1015H
Cover
ATS101512S
Box
ATS101512H
Box
ATS101518S
Box & Cover Assy
ATS101518H
Box & Cover Assy
ATS1015S
Cover
ATS1015H
Cover
ATS101518S
Box
ATS101518H
Box
11
x
18
ATS111812S
Box & Cover Assy
ATS111812H
Box & Cover Assy
ATS1118S
Cover
ATS1118H
Cover
ATS111812S
Box
ATS111812H
Box
ATS111818S
Box & Cover Assy
ATS111818H
Box & Cover Assy
ATS1118S
Cover
ATS1118H
Cover
ATS111818S
Box
ATS111818H
Box
12
x
12
ATS121212S
Box & Cover Assy
ATS121212H
Box & Cover Assy
ATS1212S
Cover
ATS1212H
Cover
ATS121212S
Box
ATS121212H
Box
ATS121218S
Box & Cover Assy
ATS121218H
Box & Cover Assy
ATS1212S
Cover
ATS1212H
Cover
ATS121218S
Box
ATS121218H
Box
ATS121224S
Box & Cover Assy
ATS121224H
Box & Cover Assy
ATS1212S
Cover
ATS1212H
Cover
ATS121224S
Box
ATS121224H
Box
13
x
24
ATS132412S
Box & Cover Assy
ATS132412H
Box & Cover Assy
ATS1324S
Cover
ATS1324H
Cover
ATS132412S
Box
ATS132412H
Box
ATS132415S
Box & Cover Assy
ATS132415H
Box & Cover Assy
ATS1324S
Cover
ATS1324H
Cover
ATS132415S
Box
ATS132415H
Box
ATS132418S
Box & Cover Assy
ATS132418H
Box & Cover Assy
ATS1324S
Cover
ATS1324H
Cover
ATS132418S
Box
ATS132418H
Box
ATS132424S
Box & Cover Assy
ATS132424H
Box & Cover Assy
ATS1324S
Cover
ATS1324H
Cover
ATS132424S
Box
ATS132424H
Box
17
x
30
ATS173012S
Box & Cover Assy
ATS173012H
Box & Cover Assy
ATS1730S
Cover
ATS1730H
Cover
ATS173012S
Box
ATS173012H
Box
ATS173018S
Box & Cover Assy
ATS173018H
Box & Cover Assy
ATS1730S
Cover
ATS1730H
Cover
ATS173018S
Box
ATS173018H
Box
ATS173022S
Box & Cover Assy
ATS173022H
Box & Cover Assy
ATS1730S
Cover
ATS1730H
Cover
ATS173022S
Box
ATS173022H
Box
ATS173024S
Box & Cover Assy
ATS173024H
Box & Cover Assy
ATS1730S
Cover
ATS1730H
Cover
ATS173024S
Box
ATS173024H
Box
ATS173030S
Box & Cover Assy
ATS173030H
Box & Cover Assy
ATS1730S
Cover
ATS1730H
Cover
ATS173030S
Box
ATS173030H
Box
24
x
36
ATS243618S
Box & Cover Assy
ATS243618H
Box & Cover Assy
ATS2436S
Cover
ATS2436H
Cover
ATS243618S
Box
ATS243618H
Box
ATS243624S
Box & Cover Assy
ATS243624H
Box & Cover Assy
ATS2436S
Cover
ATS2436H
Cover
ATS243624S
Box
ATS243624H
Box
ATS243630S
Box & Cover Assy
ATS243630H
Box & Cover Assy
ATS2436S
Cover
ATS2436H
Cover
ATS243630S
Box
ATS243630H
Box
ATS243636S
Box & Cover Assy
ATS243636H
Box & Cover Assy
ATS2436S
Cover
ATS2436H
Cover
ATS243636S
Box
ATS243636H
Box
ATS243642S
Box & Cover Assy
ATS243642H
Box & Cover Assy
ATS2436S
Cover
ATS2436H
Cover
ATS243642S
Box
ATS243642H
Box
30
x
48
ATS304818S
Box & Cover Assy
ATS304818H
Box & Cover Assy
ATS3048S
Cover
ATS3048H
Cover
ATS304818S
Box
ATS304818H
Box
ATS304824S
Box & Cover Assy
ATS304824H
Box & Cover Assy
ATS3048S
Cover
ATS3048H
Cover
ATS304824S
Box
ATS304824H
Box
ATS304836S
Box & Cover Assy
ATS304836H
Box & Cover Assy
ATS3048S
Cover
ATS3048H
Cover
ATS304836S
Box
ATS304836H
Box
American
Tech Supply, a registered CCR contracting supply company
has teamed up with Opterna, Pencell, Century, Alcoa,
Commscope, Highline, Draka USA, Carlon,Telco and several other leading fiber optic osp enclosure equipment manufacturers
to offer our contractors, RBOC's, FTTH buildout companies a complete array of OSP underground vaults, ounderground pull boxes, undergraound cabinets a & underground boxes at affordable prices. We also have national defense fiber optic security systems for any defense
department or government entity we have a fiber optic intrusion prevention system called
the Fiber Sentinel that will help prevent hackers or malicious intruders from breaking into our national defense using fiber optic technologies. We also carry a complete
array of fiber optic enclosures to house all your fiber optic equipment inside the building as well as outside. Just
click on any of the OSP fiber optic enclosures below. And ATS
carries several models of OSP enclosures from several manufacturers including
the CMPH which is a versatile OSP closure designed for both new provisioning installations
as well as rehabilitation of existing access points housed in metallic enclosures.
The CMPHs superior structural strength, outstanding environmental protection
and ease of installation combines to create a long-life housing which reduces operational expenses.
Highline Products is proud to introduce a new line of 15”, 24” and 32” transformer pads. Our innovative, patented, design results in a product that is extremely strong and durable, yet lightweight. These products are manufactured at our ISO9000 certified plant using compression molding tools and a specially formulated SMC (sheet molding compound). This process assures consisten product quality as well as other benefits such a:
ATS
carries several models of OSP enclosures from several manufacturers including
the CMPH is a versatile OSP closure designed for both new provisioning installations
as well as rehabilitation of existing access points housed in metallic enclosures.
The CMPHs superior structural strength, outstanding environmental protection
and ease of installation combine to create a long-life housing that reduces operational
expenses.
Pedlock
BDO Series Pedestals are a key element of any FTTP solution. In both greenfield
and brownfield fiber deployments, BDO Pedestals provide easy access to branch
and drop splice while protecting and storing loose buffer tube fiber optic cables.
The exclusive BDO bracket allows technicians to mount splice trays and splitters
securely with ample access to perform in-field splicing. BDO Pedestals feature
a non-metallic construction that offers super OSP protection against floods, fire,
dirt, insects and impact. An expanded-capacity split base is designed to easily
install around conduit-fed cable bundles in new construction (excludes 14
diameter pedestals). BDO pedestals are an ideal solution for rehabilitation of
metallic enclosures, and protection of co-located copper/fiber distribution points
Part
Number and Product Description
BDO
3-EG --------------6 pedestal, split base, G bracket
(fiber only), bond bar
BDO 4-EG --------------8 pedestal, split base, G bracket (fiber only), bond bar
BDO 5-EG
-------------10 pedestal, split base, G bracket (fiber only), bond bar
BDO
5-EB ---------10 pedestal, split base, B bracket
(fiber/copper), bond bar
BDO 7-OB--------14 pedestal, round base, B bracket (fiber/copper), bond bar
We can supply you with a fullline of standard
and special NEMA rated enclosures and components well suited for Homeland Security
Product support. Our own complete fiber-optics product offering can be leveraged
in certain cases to minimize lead-time and provide value added solutions in a
short time period.