Rack Mount
Showing all 24 results
-
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
12U Phantom Class® Open Frame Swing-Out Rack
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures12U Phantom Class® Open Frame Swing-Out Rack
The 12U Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rackmount equipment up off the floor, and it can easily support up to 150 lbs. The 90 degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.
- One set of 10-32 tapped rails
- 150 lb. weight capacity
- 20″ usable mounting depth
- 19″ EIA compliant
- Ships knocked down
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-800-12 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
12U V-Line Wall Mount Rack – 18″ Depth
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures12U V-Line Wall Mount Rack – 18″ Depth
The Kendall Howard 12U 18″ Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 12U 18″ Deep V-Line Wall Mount Rack.
- 18″ usable depth
- Cage Nut or 10-32 Tapped Rails
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-301-12 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
12U Wall Mount Rack
The Kendall Howard 12U Wall Mount Rack was the first of its kind! It did not take long for this rack to become the standard that all wall mount racks are measured against. The two-piece design offers unlimited flexibility. This innovative design can adjust to any width so it can house either 19″ EIA or 23″ EIA rackmount equipment. The generous 18″ depth has enough room for cables, switches, routers, and so much more. Whether you are mounting it under a desk, on a wall, or to the ceiling, the 12U Modular Wall Mount Rack is perfect for any application.
- 18″ maximum depth
- 350 lb. weight capacity
- EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-001-12 -
Rack Mount, Wall Mount, Fiber Optic Enclosures
15U 18” Deep Open Frame Wall Rack
The 18” Deep Open Frame Wall Rack has a feature-rich, dual frame design making it easy for IT technicians to install. This sturdy, open frame rack permits 18” of usable depth to house network switches, patch panels, A/V devices, and other non-rackmountable equipment. For convenient cable routing in and around the installed equipment, use any of the cable lacing points found on the top and bottom of this 2-piece open wall rack. The 18” Deep Open Frame Wall Rack is sleek, with a simplistic design, making it a strong and durable solution for your next network system.
- Two-piece design
- 18” usable depth
- 10-32 tapped rails
- Includes 25 rack screws
- Ships knockdown
- 130 lb. weight capacity
- 19” EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-500-15 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
16U V-Line Wall Mount Rack – 12″ Depth
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures16U V-Line Wall Mount Rack – 12″ Depth
Kendall Howard V-Line Open Frame Fixed Wall Mount Racks are the perfect low cost solution that IT installers and A/V technicians use every day. Kendall Howard knockdown 16U Fixed Wall Racks are incredibly easy to assemble and install.
- 12″ usable depth
- Cage Nut or 10-32 Tapped Rails
- Self-squaring design
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-300-16 -
Rack Mount, Cable Tray, Data Cabinets and Racks, Fiber Optic Enclosures
1U 20″ Rack Mountable Sliding Shelf
Rack Mount, Cable Tray, Data Cabinets and Racks, Fiber Optic Enclosures1U 20″ Rack Mountable Sliding Shelf
The Kendall Howard 1U 20″ Rack Mountable Sliding Shelf is perfect for servers, keyboards, KVM’s, switches, or any other component that you want the ability to slide out, either for convenience or to access the back of the equipment. The built-in front lip makes sliding the shelf in and out easy, and the 4-point adjustable mounting make this sliding rack shelf a smart addition to any network rack or cabinet.
- 20″ depth
- 100 lb. weight capacity
- Adjustable mounting depth
- 17.72″ maximum slide extension
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1922-3-300-01 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
21U V-Line Wall Mount Rack – 18″ Depth
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures21U V-Line Wall Mount Rack – 18″ Depth
The Kendall Howard 21U 18″ Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 21U 18″ Deep V-Line Wall Mount Rack.
- 18″ usable depth
- Cage Nut or 10-32 Tapped Rails
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-301-21 -
Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
27U LINIER® Server Cabinet Vertical Rail Kit – Cage Nut
Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures27U LINIER® Server Cabinet Vertical Rail Kit – Cage Nut
The LINIER® 27U Vertical Kit gives installers the ability to integrate additional cage nut style mounting rails into a LINIER® Full Size Server Cabinet. When installing network, security, or low-voltage electrical equipment sometimes additional mounting points are required. This additional set of rails will provide the added mounting functionality you need.
- Fully adjustable
- Includes two 27U cage nut style rails
- Can be used with the LINIER® Full Size Server Cabinets
- Installation hardware included
- Made in the USA
- 5-Year Limited Warranty
SKU: 3160-3-001-27 -
Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
2U Rack Mountable Drawer
The Kendall Howard 2U Rack Mountable Drawer provides a secure space within your rack or cabinet for storing files, electronics, software, cables, testers, and more. By storing equipment within the rack, you’ll save time running back and forth to retrieve it. The locking drawer will ensure your peripherals are protected from damage or unauthorized tampering.
- 100 lb. weight capacity
- Smooth ball bearing slides
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1922-3-100-02 -
Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
3U 16″ Component Shelf – 2 Pack
The Kendall Howard 3U 16″ Component Shelf takes on a lot of weight for its size. Rated to hold up to 150 lbs., this heavy duty shelf is perfect for supporting large non-rack mountable equipment such as tower computers, servers, monitors, and UPS’s
- Two pack
- 16″ depth
- 19″ EIA compliant
- 150 lb. weight capacity
- Made in the USA
- Limited Lifetime Warranty
SKU: 1906-3-203-03 -
Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
3U Rack Mountable Drawer
Kendall Howard Rackmount Drawers include a built-in lock and have a maximum load capacity of 100 pounds. The easy to remove slides make installation simple and easy.
- 100 lb. weight capacity
- Smooth ball bearing slides
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1922-3-100-03 -
Rack Mount, Fiber Optic Enclosures, Uncategorized
41U Knockdown 4-Post Open Frame Rack
Kendall Howard manufactures the 41U Knockdown 4-Post Open Frame Rack – one of the strongest adjustable open frame knockdown racks on the market today. Our unique, heavy duty, square tube steel design assembles with just a few bolts and makes this racking system affordable, versatile, and easy to ship. Its knockdown design makes it able to ship in a small wooden crate and ship out as a small package that can be delivered the next day. For a reliable and convenient racking solution, the 41U Knockdown 4-Post Open Frame Rack is a great option.
- Fully adjustable rails from 3″ to 36″
- Levelers included
- Assembles in less than 30 minutes
- Cage nut style rails
- 2,000 lb. weight capacity (Holds 1,000 lbs. on casters)
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1940-3-001-41 -
Rack Mount, Fiber Optic Enclosures
45U 4-Post Adjustable Rack
For an adjustable 4-point solution ideal for data centers and wiring closets, go with the 4-Post Adjustable Rack. Its usable depth can adjust from 26” to 38” so you’re not left with a fixed depth. To adjust the depth, simply move each bracket to your desired depth and secure the hardware in place. If you need a larger solution, gang multiple 4-Post Adjustable Racks together by using the ganging holes found on each side. You can even gang both the 24U and 45U size racks together because the holes align. For installations that require connections be made above the rack, such as trunk cabling or ladder racks, simply go through the completely open frame at the top. The 4-Post Adjustable Rack features eight ¼-20 x 0.5” grounding studs on the inside of the four rails that allow you to ground your equipment directly to those studs. Also included with the rack are serrated tooth washers that, when tightened, dig in and remove paint from the rack, establishing electrical continuity throughout the rack. With its strength, durability, and adjustability the 4-Post Adjustable Rack is a sure fit for your next installation.
- Adjustable usable depth from 26” to 38”
- 10-32 tapped rails
- Includes 50 10-32 rack screws
- Includes eight 1/4-20 grounding studs
- Ships knocked down in one box
- Gangable
- 1,600 lb. weight capacity
- 19” EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1940-3-100-45 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
48″ Performance Plus Accessory Bar Kit
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures48″ Performance Plus Accessory Bar Kit
Performance Plus® Accessory Bars are designed to work with the Performance Plus® LAN Stations/Workbenches. These bars make it easy to mount LCD Monitor Mounts and Power Strips to your workstation. The Accessory Bars adjust to any height, and also act as a cable lacing bar. Five options are available to accommodate the various sizes of the Performance Plus® LAN Stations/Workbenches.
- Installs in minutes
- Mount LCD monitors
- Attach power strips
- Adjusts to any height (in 1″ increments)
- Made in the USA
- Limited Lifetime Warranty
SKU: 7000-3-548-00 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
4U Pivot Frame Wall Mount Rack
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures4U Pivot Frame Wall Mount Rack
The 4U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rack mount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections – a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12″ depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.
Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rack mount Brackets.
- Optional Pivot Frame Wall Mount Rack Cover available (Sold separately)
- Optional Pivot Frame Stationary Rack mount Brackets available (Sold separately)
- Includes 12 10-32 rack screws
- 10-32 tapped rails
- 12″ depth
- 90 degree swing down
- 75 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-400-04 -
Rack Mount, Fiber Optic Enclosures
4U Rack Mountable Drawer
Kendall Howard Rackmount Drawers include a built-in lock and have a maximum load capacity of 100 pounds. The easy to remove slides make installation simple and easy.
- 100 lb. weight capacity
- Smooth ball bearing slides
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1922-3-100-04 -
Rack Mount, Wall Mount, Data Cabinets and Racks, Fiber Optic Enclosures
60″ Performance Plus Accessory Bar Kit
Rack Mount, Wall Mount, Data Cabinets and Racks, Fiber Optic Enclosures60″ Performance Plus Accessory Bar Kit
Performance Plus® Accessory Bars are designed to work with the Performance Plus® LAN Stations/Workbenches. These bars make it easy to mount LCD Monitor Mounts and Power Strips to your workstation. The Accessory Bars adjust to any height, and also act as a cable lacing bar. Five options are available to accommodate the various sizes of the Performance Plus® LAN Stations/Workbenches.
- Installs in minutes
- Mount LCD monitors
- Attach power strips
- Adjusts to any height (in 1″ increments)
- Made in the USA
- Limited Lifetime Warranty
SKU: 7000-3-560-00 -
Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
72″ Performance Plus Accessory Bar Kit
Performance Plus® Accessory Bars are designed to work with the Performance Plus® LAN Stations/Workbenches. These bars make it easy to mount LCD Monitor Mounts and Power Strips to your workstation. The Accessory Bars adjust to any height, and also act as a cable lacing bar. Five options are available to accommodate the various sizes of the Performance Plus® LAN Stations/Workbenches.
- Installs in minutes
- Mount LCD monitors
- Attach power strips
- Adjusts to any height (in 1″ increments)
- Made in the USA
- Limited Lifetime Warranty
SKU: 7000-3-572-00 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
8U 18″ Deep Open Frame Wall Rack
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures8U 18″ Deep Open Frame Wall Rack
The 18” Deep Open Frame Wall Rack has a feature-rich, dual frame design making it easy for IT technicians to install. This sturdy, open frame rack permits 18” of usable depth to house network switches, patch panels, A/V devices, and other non-rackmountable equipment. For convenient cable routing in and around the installed equipment, use any of the cable lacing points found on the top and bottom of this 2-piece open wall rack. The 18” Deep Open Frame Wall Rack is sleek, with a simplistic design, making it a strong and durable solution for your next network system.
- Two-piece design
- 18” usable depth
- 10-32 tapped rails
- Includes 25 rack screws
- Ships knockdown
- 130 lb. weight capacity
- 19” EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-500-08 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
8U Wall Mount Rack
The Kendall Howard 8U Wall Mount Rack was the first of its kind! It did not take long for this rack to become the standard that all wall mount racks are measured against. The two-piece design offers unlimited flexibility. This innovative design can adjust to any width so it can house either 19″ EIA or 23″ EIA rackmount equipment. The generous 18″ depth has enough room for cables, switches, routers, and so much more. Whether you are mounting it under a desk, on a wall, or to the ceiling, the 8U Modular Wall Mount Rack is perfect for any application.
- 18″ maximum depth
- 350 lb. weight capacity
- EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-001-08 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
LAN Station Keyboard Tray
Easily tuck away your keyboard when not in use by installing the LAN Station Keyboard Tray. This sliding 19″ by 19″ tray accommodates most standard keyboards and is easy to install. Simply mount the LAN Station Keyboard Tray under any Performance Series® LAN Station and you’ll be able to conveniently conceal your keyboard.
- Easy to install
- 19″ by 19″ sliding tray
- Works with most standard keyboards
- Made in the USA
- Limited Lifetime Warranty
SKU: 5200-3-200-00 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
LAN Station LCD Monitor Mount
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic EnclosuresLAN Station LCD Monitor Mount
Kendall Howard LAN Station LCD Monitor Mounts make it simple to mount LCD monitors to any Kendall Howard Performance Series® Accessory Bar. They are designed to easily mount any VESA compliant monitor up to a 22″ widescreen. The Kendall Howard LAN Station LCD Monitor Mount easily pivots left to right, and allows the user to adjust the tilt up to 40 degrees up or down, depending on the size of the monitor.
- 360 degrees of swivel (portrait to landscape)
- Up to 40 degrees of tilt (varies depending on monitor size)
- 75mm and 100mm VESA compliant mounting pattern
- 40 lb. maximum load or LCDs up to 22″
- Made in the USA
- Limited Lifetime Warranty
SKU: 5200-3-510-00 -
Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
LAN Station Racking System
The LAN Station Racking System easily installs under the work surface of a Performance Series® 200 or 300 LAN Station/Workbench. These two series of workbenches have two lower shelves that help hold the Racking System in place. (The LAN Station Racking System requires a full depth lower shelf in order to install.) With the Racking System you can easily install rackmount components next to tower servers and computers, and you can turn any work station into a fully functional open frame rack. Built with a 24″ depth and cage nut style rails, this racking system has the capacity to hold up to 400 lbs. of your equipment.
- 13U
- Installs in minutes
- 24″ fixed mounting depth
- 400 lb. weight capacity
- Made in the USA
- Limited Lifetime Warranty
SKU: 5200-3-600-13 -
Rack Mount, Cable Management, Data Cabinets and Racks, Fiber Optic Enclosures
Performance Corner Accessory Bar
Rack Mount, Cable Management, Data Cabinets and Racks, Fiber Optic EnclosuresPerformance Corner Accessory Bar
Performance Series® Accessory Bars are designed to work with the Performance Series® LAN Stations/Workbenches. These bars make it easy to mount LCD Monitor Mounts and Power Strips to your workstation. The Accessory Bars adjust to any height, and also act as a cable lacing bar.
- Installs in minutes
- Mount LCD monitors
- Attach power strips
- Adjusts to any height
- Made in the USA
- Limited Lifetime Warranty
SKU: 5200-3-500-CR
