Transformers
Showing 1–24 of 1092 results
-
Audio Transformers, Speaker Level, Transformers, Hammond
“Classic” 600 Ohm 119DA Series – (119DA)
In response to requests from the “Collins Collectors Association” we developed a high quality, matching audio transformer for older equipment with 600 ohm audio output, driving modern low impedance speakers.
Or it can also be used for driving “classic” high impedance speakers used with newer equipment. Simply turn the 119DA around – swaping primary for secondary (ie…4 or 8 ohm input – with 600 ohms out).
Features
- Large core area for excellent low frequency response
- Manufactured with high quality 29M6 laminations (for low distortion)
- Concentric wound for excellent coupling
- Isolation type transformer (ie…separate primary and secondary)
- Primary: 600 Ohms (using 6″ wire leads)
- Secondary: 8 Ohms with a 4 Ohm center tap (using solder lugs)
- Power: Rated at 12 watts
- Frequency response: 30 Hz. – 20 Khz. (+/- 1 db @ Full Power – 1 Khz. Reference)
- Weight: 1 pound, 4 oz.
- Mounting: 2 hole bracket mount – on 2 & 13/16″ mounting hole centers
- Cost: under $40.00 U.S. !
- IN STOCK – check out our Classic Distributors.
SKU: 119DA -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107B)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107B)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107B -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107D)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107D)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107D -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107E)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107E)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107E -
Audio Transformers, Signal Level, Transformers, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107G)
Audio Transformers, Signal Level, Transformers, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107G)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107G -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107H)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107H)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107H -
Signal Level, Transformers, Audio Transformers, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107J)
Signal Level, Transformers, Audio Transformers, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107J)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107J -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107L)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107L)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107L -
Signal Level, Transformers, Audio Transformers, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107N)
Signal Level, Transformers, Audio Transformers, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107N)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107N -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107P)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107P)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107P -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107R)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107R)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107R -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107T)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107T)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107T -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107V)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107V)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107V -
Transformers, Audio Transformers, Signal Level, Hammond
150mw Audio Miniature Epoxy Potted 107 Series – (107X)
Transformers, Audio Transformers, Signal Level, Hammond150mw Audio Miniature Epoxy Potted 107 Series – (107X)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 150 milliwatt (+/- 1.5 db, 300 Hz. – 50 KHz.)
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies (except 107X). See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 107B 150 ct 12 20 2 12 107D 150 ct 150 ct 20 25 12 107E 600 ct 3.2 59 0.6 6 107G 600 ct 250 ct 59 10 6 107H 600 ct 600 ct 59 75 6 107J 1K ct 600 ct 92 71 4.5 107L 10K ct 3.2 780 0.65 1.5 107N 10K ct 600 ct 680 70 1.5 107P 10K ct 1.5K ct 680 150 1.5 107R 10K ct 4K ct 680 390 1.5 107T 10K ct 10K ct 680 700 1.5 107V 25K ct 600 ct 1300 70 1 107X 100K ct 1K ct 3700 80 0 SKU: 107X -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25AGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25AGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25AGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25FGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25FGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25FGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25JGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25JGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25JGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25KGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25KGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25KGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25LGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25LGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25LGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50AGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50AGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50AGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50FGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50FGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50FGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50JGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50JGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50JGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50KGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50KGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50KGA -
Transformers, Power Transformers, Hammond
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50LGA)
Transformers, Power Transformers, Hammond24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50LGA)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50LGA