Shop By Brand
Distribution Network Solutions
Showing all 15 results
-
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
Extended Kit with 250 and 900 Fiber holders (includes cleaver and stripper)
-
-
-
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
PowerGuide® ShortSpan DT Cables
Item Number
PowerGuide® ShortSpan DT CablesDescription
PowerGuide® ShortSpan DT Cables
Applications
ADSS, Aerial, FTTx
Features and Benefits- Industry-first, gel-free ADSS cable for cleaner, faster and less costly deployments
- Efficient, cost-effective solution for short cable spans ranging up to 1.150 feet (350 meters)
- Lighter weight, dry cable helps cut cable end preparation time
- Enables significant cost savings from the use of less costly attachment hardware
- Allows up to a 10% greater span length capability
- Fiber counts up to 144
- Single polyethylene outer jacket for fast, convenient cable preparation (suitable for distribution and low-voltage applications)
- Cleaner work environment helps support faster splicing with higher yields
- Small round profile minimizes wind and ice loading
- Environmentally-friendly cable helps reduce waste and the need for special cleaning solvents
- Single cable outer diameter for fiber counts of 2 to 60 for simplified hardware selection and splicing
- Available with OFS AllWave® Zero Water Peak (ZWP) Single-Mode, TrueWave® RS Low Water Peak (LWP) and multimode fibers
- Highly durable and reliable for short spans including FTTH deployments, distribution networks, direct use in ducts, aerial-to-duct transitions and aerial-to-underground installations
SKU: PowerGuide® ShortSpan DT Cables -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
PowerGuide® ShortSpan DT Cables
Item Number
PowerGuide® ShortSpan DT CablesDescription
PowerGuide® ShortSpan DT Cables
Applications
ADSS, Aerial, FTTx
Features and Benefits- Industry-first, gel-free ADSS cable for cleaner, faster and less costly deployments
- Efficient, cost-effective solution for short cable spans ranging up to 1.150 feet (350 meters)
- Lighter weight, dry cable helps cut cable end preparation time
- Enables significant cost savings from the use of less costly attachment hardware
- Allows up to a 10% greater span length capability
- Fiber counts up to 144
- Single polyethylene outer jacket for fast, convenient cable preparation (suitable for distribution and low-voltage applications)
- Cleaner work environment helps support faster splicing with higher yields
- Small round profile minimizes wind and ice loading
- Environmentally-friendly cable helps reduce waste and the need for special cleaning solvents
- Single cable outer diameter for fiber counts of 2 to 60 for simplified hardware selection and splicing
- Available with OFS AllWave® Zero Water Peak (ZWP) Single-Mode, TrueWave® RS Low Water Peak (LWP) and multimode fibers
- Highly durable and reliable for short spans including FTTH deployments, distribution networks, direct use in ducts, aerial-to-duct transitions and aerial-to-underground installations
SKU: PowerGuide® ShortSpan DT Cables -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AllWave® Zero Water Peak (ZWP) Fiber
Specialty Optical Cables, Distribution Network Solutions, OFS OpticsAllWave® Zero Water Peak (ZWP) Fiber
Item Number
AllWave® Zero Water Peak (ZWP) FiberDescription
AllWave® Zero Water Peak (ZWP) FiberAward-winning AllWave Zero Water Peak (ZWP) Single-Mode Fiber provides low optical loss across the entire wavelength spectrum from 1260 nm to 1625 nm. A patented manufacturing process permanently removes the water peak defect for a fiber that offers the lowest loss of all commercial low water peak (LWP) fibers in the industry.
Product Description
Compliant to the latest ITU-T G.652 A – D requirements, AllWave ZWP Fiber offers dramatically improved performance in almost every characteristic over conventional single-mode fiber, including increased available spectrum, low optical loss, superior macrobend performance and ultra-low polarization mode dispersion (PMD). By using the industry’s tightest geometric controls and tight mode field control during manufacture, AllWave ZWP Fiber enables consistently low loss splices and improved connectorization performance. Combined with complete backward compatibility with the embedded G.652 single-mode fiber base, these features provide ultimate network design flexibility and enable cost-effective solutions to help maximize return on investment.
Applications
Campus Backbones, FTTx, Local Access, Long Haul, Metro Access, Metro Edge
Features and Benefits- 50% increase in usable optical spectrum enables 16-channel CWDM and DWDM support
- Minimizes attenuation across the full wavelength spectrum and provides low, stable loss in the 1400 nm band
- Ultra-low PMD allows speed and distance upgrades
- Macrobend performance superior to the G.652.D standard
- Long-term attenuation reliability by using high-purity synthetic silica
SKU: AllWave® Zero Water Peak (ZWP) Fiber -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AllWave® Zero Water Peak (ZWP) Fiber
Specialty Optical Cables, Distribution Network Solutions, OFS OpticsAllWave® Zero Water Peak (ZWP) Fiber
Item Number
AllWave® Zero Water Peak (ZWP) FiberDescription
AllWave® Zero Water Peak (ZWP) FiberAward-winning AllWave Zero Water Peak (ZWP) Single-Mode Fiber provides low optical loss across the entire wavelength spectrum from 1260 nm to 1625 nm. A patented manufacturing process permanently removes the water peak defect for a fiber that offers the lowest loss of all commercial low water peak (LWP) fibers in the industry.
Product Description
Compliant to the latest ITU-T G.652 A – D requirements, AllWave ZWP Fiber offers dramatically improved performance in almost every characteristic over conventional single-mode fiber, including increased available spectrum, low optical loss, superior macrobend performance and ultra-low polarization mode dispersion (PMD). By using the industry’s tightest geometric controls and tight mode field control during manufacture, AllWave ZWP Fiber enables consistently low loss splices and improved connectorization performance. Combined with complete backward compatibility with the embedded G.652 single-mode fiber base, these features provide ultimate network design flexibility and enable cost-effective solutions to help maximize return on investment.
Applications
Campus Backbones, FTTx, Local Access, Long Haul, Metro Access, Metro Edge
Features and Benefits- 50% increase in usable optical spectrum enables 16-channel CWDM and DWDM support
- Minimizes attenuation across the full wavelength spectrum and provides low, stable loss in the 1400 nm band
- Ultra-low PMD allows speed and distance upgrades
- Macrobend performance superior to the G.652.D standard
- Long-term attenuation reliability by using high-purity synthetic silica
SKU: AllWave® Zero Water Peak (ZWP) Fiber -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AllWave® FLEX ZWP Fiber
Item Number
AllWave® FLEX ZWP FiberDescription
AllWave® FLEX ZWP FiberAllWave FLEX Zero Water Peak (ZWP) Single-Mode Fiber is the first ZWP G.652.D fiber to offer optimized bend performance for any application where small bend diameters may occur. Fully compliant with ITU-T G.657.A, AllWave FLEX ZWP Fiber is completely compatible with all conventional single-mode fibers.
Product Description
While AllWave FLEX ZWP Fiber retains all the benefits of AllWave ZWP Fiber, it also maintains very low bending loss across the full 1260 nm – 1625 nm wavelength spectrum while also ensuring long-term fiber strength and reliability. In fact, this fiber offers five times better bend performance than conventional single-mode and Leading Low Water Peak (LWP) fibers.The macrobending and microbending loss improvements of AllWave FLEX ZWP Fiber help (1) facilitate more compact cabinet and enclosure designs with more intricate routing; (2) protect against loss from inadvertent fiber bends; and (3) reduce potential damage from cable pulling and flexing. This bend-optimized fiber also helps to improve cable performance in demanding high-stress and low temperature environments with twice the microbend protection of conventional single-mode fibers.
Applications
Analog Video, Any application with transmission speeds of 40 Gb/s and beyond, At the customer premises, Closures, Drop Cables, Field management/storage apparatus located throughout the network, FTTx, High-Power Applications, Microcables, The Central Office
Features and Benefits- Improved bend performance saves space, time and money even for L-Band wavelengths up to 1625 nm
- ZWP Fiber for 50% increase in usable optical spectrum enables 16-channel CWDM and DWDM support
- Coiled into a 10 mm radius loop, fiber incurs loss of < 0.5 dB at 1625 nm and < 0.2 dB at 1550 nm
- Easier to install, handle and store in space-constrained applications
- Tight geometry for very low splice loss and improved connector performance
SKU: AllWave® FLEX ZWP Fiber -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AllWave® FLEX ZWP Fiber
Item Number
AllWave® FLEX ZWP FiberDescription
AllWave® FLEX ZWP FiberAllWave FLEX Zero Water Peak (ZWP) Single-Mode Fiber is the first ZWP G.652.D fiber to offer optimized bend performance for any application where small bend diameters may occur. Fully compliant with ITU-T G.657.A, AllWave FLEX ZWP Fiber is completely compatible with all conventional single-mode fibers.
Product Description
While AllWave FLEX ZWP Fiber retains all the benefits of AllWave ZWP Fiber, it also maintains very low bending loss across the full 1260 nm – 1625 nm wavelength spectrum while also ensuring long-term fiber strength and reliability. In fact, this fiber offers five times better bend performance than conventional single-mode and Leading Low Water Peak (LWP) fibers.The macrobending and microbending loss improvements of AllWave FLEX ZWP Fiber help (1) facilitate more compact cabinet and enclosure designs with more intricate routing; (2) protect against loss from inadvertent fiber bends; and (3) reduce potential damage from cable pulling and flexing. This bend-optimized fiber also helps to improve cable performance in demanding high-stress and low temperature environments with twice the microbend protection of conventional single-mode fibers.
Applications
Analog Video, Any application with transmission speeds of 40 Gb/s and beyond, At the customer premises, Closures, Drop Cables, Field management/storage apparatus located throughout the network, FTTx, High-Power Applications, Microcables, The Central Office
Features and Benefits- Improved bend performance saves space, time and money even for L-Band wavelengths up to 1625 nm
- ZWP Fiber for 50% increase in usable optical spectrum enables 16-channel CWDM and DWDM support
- Coiled into a 10 mm radius loop, fiber incurs loss of < 0.5 dB at 1625 nm and < 0.2 dB at 1550 nm
- Easier to install, handle and store in space-constrained applications
- Tight geometry for very low splice loss and improved connector performance
SKU: AllWave® FLEX ZWP Fiber -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AllWave® + ZWP Fiber
Item Number
AllWave® + ZWP FiberDescription
AllWave® + ZWP FiberWhen compared to conventional single-mode fiber, AllWave+ Zero Water Peak (ZWP) Single-Mode Fiber dramatically improves performance across the 1260 nm – 1625 nm spectrum. This fiber offers all the benefits of AllWave Fiber plus a 40% smaller minimum bend radius, a 50% lower bend loss and a 33% improved polarization mode dispersion (PMD) link design value.
Product Description
A combination ITU-T G.652.D and G.657.A1 compliant fiber, AllWave+ Fiber delivers low and stable loss in the 1360 nm -1460 nm E-band, enabling 16-channel CWDM, DWDM and FTTX support on a single fiber. In addition, this fiber’s bend performance far exceeds G.652.D and complies with G.657.A1, supporting a minimum bend radius of 10 mm and lower bend loss than conventional single-mode fibers.While this low bend loss improves performance and reliability, it also helps to lower installation costs by allowing the use of smaller cables and terminals. AllWave+ Fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
Applications
Campus Backbones, FTTx, Local Access, Long Haul, Metro Access, Metro Edge, Mobile backhaul
Features and Benefits- Low optical loss across the entire 1260-1625 nm spectrum
- 50% greater usable spectrum than conventional single-mode fiber
- Reduced bend loss across the bend-sensitive 1460-1625 nm S, C and L Bands
- Industry’s tightest geometric control for ultra-low splice loss and improved connector performance
- High purity synthetic silica for long-term attenuation stability and mechanical reliability
- Ultra-low fiber PMD for speed and distance upgrades
SKU: AllWave® + ZWP Fiber -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AllWave® + ZWP Fiber
Item Number
AllWave® + ZWP FiberDescription
AllWave® + ZWP FiberWhen compared to conventional single-mode fiber, AllWave+ Zero Water Peak (ZWP) Single-Mode Fiber dramatically improves performance across the 1260 nm – 1625 nm spectrum. This fiber offers all the benefits of AllWave Fiber plus a 40% smaller minimum bend radius, a 50% lower bend loss and a 33% improved polarization mode dispersion (PMD) link design value.
Product Description
A combination ITU-T G.652.D and G.657.A1 compliant fiber, AllWave+ Fiber delivers low and stable loss in the 1360 nm -1460 nm E-band, enabling 16-channel CWDM, DWDM and FTTX support on a single fiber. In addition, this fiber’s bend performance far exceeds G.652.D and complies with G.657.A1, supporting a minimum bend radius of 10 mm and lower bend loss than conventional single-mode fibers.While this low bend loss improves performance and reliability, it also helps to lower installation costs by allowing the use of smaller cables and terminals. AllWave+ Fiber has the same 9.2 micron mode field diameter as and is fully backward compatible with the installed base of G.652 single-mode fiber for seamless splicing, testing and faster network turn-up.
Applications
Campus Backbones, FTTx, Local Access, Long Haul, Metro Access, Metro Edge, Mobile backhaul
Features and Benefits- Low optical loss across the entire 1260-1625 nm spectrum
- 50% greater usable spectrum than conventional single-mode fiber
- Reduced bend loss across the bend-sensitive 1460-1625 nm S, C and L Bands
- Industry’s tightest geometric control for ultra-low splice loss and improved connector performance
- High purity synthetic silica for long-term attenuation stability and mechanical reliability
- Ultra-low fiber PMD for speed and distance upgrades
SKU: AllWave® + ZWP Fiber -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AccuRibbon® DC Cable
Item Number
AccuRibbon® DC CableDescription
AccuRibbon® DC CableAt first glance, you might not recognize an AccuRibbon® DC Cable. That’s because it uses the same robust sheath as the gel-filled AccuRibbon LXE Cable. However, once you open the patented core of an AccuRibbon DC Cable, the difference between a gel-filled and a completely dry cable is clear. The core of the all-dry AccuRibbon DC Cable contains absolutely no gels or messy filling compounds, which eliminates the costly labor of removing gel and oil from each fiber ribbon prior to splicing and helps your tools and your workspace stay clean and safe.
The construction of the AccuRibbon DC Cable begins with its dry central core tube, which contains a gel-free, water-blocking tape and either up to eighteen 12-fiber AccuRibbon units (12 to 216 fibers) or up to eighteen 24-fiber AccuRibbon units (240 to 432 fibers). Surrounding the central tube is an additional layer of water-blocking tape and an optional layer of armor. Completing the construction of the AccuRibbon DC Cable is a durable polyethylene (PE) jacket with integrated metallic or dielectric strength members. Ripcords are strategically located beneath the jacket for easy cable entry.
Why The AccuRibbon DC Cable?
With its innovative dry-core design, the AccuRibbon DC Cable is specifically engineered for faster, cleaner installation. Unlike traditional outside plant fiber optic cables that use gels in direct contact with optical fibers, the AccuRibbon DC Cable replaces the gel inside the central tube with a super-absorbent tape that provides water blocking “on demand”. The absence of gels allows almost effortless splice preparation and a lower overall cable weight. Why not lose the gel today?
In addition to being gel free, AccuRibbon units support the use of mass-fusion splicing to speed fiber termination. The inherent high fiber density of AccuRibbon units also helps to maximize the number of fibers that can be deployed in available duct space. Deploying the most fibers possible in a limited space and terminating them quickly and cheaply are critical to cost-effective deployments – AccuRibbon DC Cables can help you do both.
Applications
Aerial, Direct Buried, Drop, Mass-Fusion Splicing
Features and Benefits- Totally gel-free fiber optic cable design for cleaner, faster installations
- A significantly lighter weight cable for faster and easier deployment
- AccuRibbon core maximizes optical fibers per duct and supports mass-fusion splicing
- Metallic and dielectric sheath options support lashed aerial, direct buried, and duct installations
- Deploy up to 432 optical fibers in a one-inch ID duct
- RDUP (formerly RUS) listed; compliant with ANSI/ICEA, Telcordia Technologies, and IEC specifications for reliable performance
- Available with OFS AllWave® Zero Water Peak (ZWP) Single-Mode Optical Fiber, as well as TrueWave® RS Low Water Peak (LWP) Single- Mode Optical Fibers
SKU: AccuRibbon® DC Cable -
Specialty Optical Cables, Distribution Network Solutions, OFS Optics
AccuRibbon® DC Cable
Item Number
AccuRibbon® DC CableDescription
AccuRibbon® DC CableAt first glance, you might not recognize an AccuRibbon® DC Cable. That’s because it uses the same robust sheath as the gel-filled AccuRibbon LXE Cable. However, once you open the patented core of an AccuRibbon DC Cable, the difference between a gel-filled and a completely dry cable is clear. The core of the all-dry AccuRibbon DC Cable contains absolutely no gels or messy filling compounds, which eliminates the costly labor of removing gel and oil from each fiber ribbon prior to splicing and helps your tools and your workspace stay clean and safe.
The construction of the AccuRibbon DC Cable begins with its dry central core tube, which contains a gel-free, water-blocking tape and either up to eighteen 12-fiber AccuRibbon units (12 to 216 fibers) or up to eighteen 24-fiber AccuRibbon units (240 to 432 fibers). Surrounding the central tube is an additional layer of water-blocking tape and an optional layer of armor. Completing the construction of the AccuRibbon DC Cable is a durable polyethylene (PE) jacket with integrated metallic or dielectric strength members. Ripcords are strategically located beneath the jacket for easy cable entry.
Why The AccuRibbon DC Cable?
With its innovative dry-core design, the AccuRibbon DC Cable is specifically engineered for faster, cleaner installation. Unlike traditional outside plant fiber optic cables that use gels in direct contact with optical fibers, the AccuRibbon DC Cable replaces the gel inside the central tube with a super-absorbent tape that provides water blocking “on demand”. The absence of gels allows almost effortless splice preparation and a lower overall cable weight. Why not lose the gel today?
In addition to being gel free, AccuRibbon units support the use of mass-fusion splicing to speed fiber termination. The inherent high fiber density of AccuRibbon units also helps to maximize the number of fibers that can be deployed in available duct space. Deploying the most fibers possible in a limited space and terminating them quickly and cheaply are critical to cost-effective deployments – AccuRibbon DC Cables can help you do both.
Applications
Aerial, Direct Buried, Drop, Mass-Fusion Splicing
Features and Benefits- Totally gel-free fiber optic cable design for cleaner, faster installations
- A significantly lighter weight cable for faster and easier deployment
- AccuRibbon core maximizes optical fibers per duct and supports mass-fusion splicing
- Metallic and dielectric sheath options support lashed aerial, direct buried, and duct installations
- Deploy up to 432 optical fibers in a one-inch ID duct
- RDUP (formerly RUS) listed; compliant with ANSI/ICEA, Telcordia Technologies, and IEC specifications for reliable performance
- Available with OFS AllWave® Zero Water Peak (ZWP) Single-Mode Optical Fiber, as well as TrueWave® RS Low Water Peak (LWP) Single- Mode Optical Fibers
SKU: AccuRibbon® DC Cable
