Shop By Brand
InnerDuct Accessories, Micro, Tools, InnerDuct
0.75″ Pulling Grip for MicroDucts and Cables – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Low-profile and made from Dual Polymer and Kevlar construction, the mesh Pulling Grip is an extremely strong, yet convenient means of pulling various sizes of MicroDucts or cables.
Call for Price
Compare
Low-profile and made from Dual Polymer and Kevlar construction, the mesh Pulling Grip is an extremely strong, yet convenient means of pulling various sizes of MicroDucts or cables.
FEATURES
- Rated up to 700lbs
- Convenient pulling loop
- 60″ total length
- Abrasion resistant with minimal fraying
- Can be used repeatedly
- Add minimal overall diameter to the MicroDuct or cable
- 0.50″ (blue) can accommodate Microduct or cable diameters .375″ to .750″ (9.5mm to 19mm)
- 0.75″ (yellow) can accommodate MicroDuct or cable diameters .750″ to 1.25″ (19mm to 31.8mm)
| Weight | 1 lbs |
|---|
Related products
-
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20002173 -
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler HYB 1.590″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000121 -
InnerDuct Accessories, Couplers, InnerDuct
2.50″ Shur-Lock II Coupler SDR 2.875″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000172 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000036
