Shop By Brand
Data Cabinets and Racks
Caster Base
The LINIER® Caster Base provides a sturdy, mobile base that is suited to be used with any of the LINIER® Fixed Wall Mount Cabinets. The low profile base assembles in less than five minutes and adds only 2.9″ in height to your cabinet. Whether you need a compact rolling cabinet to fit under a desk, or you’re short on space and don’t want to wall mount the unit, the LINIER® Caster Base in conjunction with a LINIER® Fixed Wall Mount Cabinet provides a cost-conscious, mobile solution.
- To be used with the LINIER® Fixed Wall Mount Cabinets
- 250 lb. weight capacity
- Easy to assemble
- Made in the USA
- 5-Year Limited Warranty
$96.75
Compare
Caster Base
Features
| Low Profile Swivel Casters | The 2″ dual wheel casters swivel 360 degrees providing easy maneuverability. |
|---|---|
| Easy to Assemble | The knockdown design reduces shipping costs and takes less than five minutes to assemble. |
| Polypropylene Wheels | The polypropylene material is perfect for all flooring types as it will not scuff or damage flooring during movement. |
| Open Design | The large opening in the bottom allows access to the laser knockout in the bottom of the LINIER® Fixed Cabinet. This knockout can be used for cable routing or to install a Fan Assembly Kit. |
Specifications
| Part Number | 3140-3-001-01 |
| Width | 23.78″ |
| Depth | 23.78″ |
| Height | 4.88″ |
| Weight | 10.00 lbs. |
| Shipping Dimensions | 8″ L x 26″ W x 6″ H |
| Material(s) | Base: CRS (Cold Rolled Steel) |
| Color/Finish | Black Powder Coated Finish |
| UPC | 879447004175 |
| Warranty | 5 Year Limited Warranty |
What’s In the Box?
- QTY 2 – Front/Rear Rails
- QTY 2 – Side Rails
- QTY 4 – Swivel Casters
- QTY 16 – ¼-20 Nuts
Related products
-
Data Cabinets and Racks
4-Piece Rack Conversion Kit
The Kendall Howard 4-Piece Conversion Kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. The 4-Piece Conversion Kit allows you to also upgrade any 2-post rack to a 4-post rack with an adjustable depth of 24 – 40″. If you have to move or replace the rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 4-Piece Conversion Kit provides a safe and dependable solution.
- Provides added support to a 2-post rack
- Creates a 4-post rack with two 2-post racks
- Adjustable from 20″ to 35″
- Mounting hardware not included
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1927-3-004-00 -
Data Cabinets and Racks
8U Pivot Frame Wall Mount Rack
The 8U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rack mount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections – a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12″ depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.
Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rackmount Brackets.- Optional Pivot Frame Wall Mount Rack Cover available (Sold separately)
- Optional Pivot Frame Stationary Rack mount Brackets available (Sold separately)
- Includes 12 10-32 rack screws
- 10-32 tapped rails
- 12″ depth
- 90 degree swing down
- 75 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1915-3-400-08 -
Data Cabinets and Racks
1U 20″ Vented Rack Mountable Sliding Shelf
Kendall Howard manufactures and stocks two models of our sliding rack shelves (solid and vented), each holding up to a 100 lbs. Our sliding rack shelves are perfect for servers, keyboards, KVMs, switches, or any other component that you want the ability to slide out, either for convenience or to access the back of the equipment.
- Four mounting holes per U space
- 20″ depth
- 100 lb. weight capacity
- Mounting depth adjusts from 19″ to 28″
- 17.72″ maximum slide extension
- 19″ EIA compliant
- Rounded corners
- Easy to install
- Made in the USA
- Limited Lifetime Warranty
SKU: 1922-3-400-01 -
Data Cabinets and Racks
37U LINIER® Server Cabinet Vertical Rail Kit – 10-32 Tapped
The LINIER® 37U Server Cabinet Vertical Rail Kit can be installed in any of the LINIER® Full Size Cabinets to provide a 10-32 tapped rail solution. This tapped rail kit can replace the cage nut style rails that are included with the LINIER® Server Cabinets for installers who prefer a tapped rail mounting solution.
- Fully adjustable
- Includes two 37U 10-32 tapped rails
- Can be used with the LINIER® Full Size Server Cabinets
- Installation hardware included
- Made in the USA
- 5-Year Limited Warranty
SKU: 3160-3-002-37
