Shop By Brand
F/UTP, Copper Cables, Proterial
F/UTP Drybit Category 6 Indoor-Outdoor Cable
Conduit that originates indoors but passes through or under a concrete slab is often subject to water infiltration. National Electric Code (NEC) 2017 Edition, Article 100 and the BICSI Telecommunication Distribution Methods Manual (TDMM) define these environments as wet locations since the slab and the associated conduit are subject to saturation by water. Standard plenum or riser rated cables can’t be used in these situations since water will have a catastrophic effect on both their electrical and physical performance. The typical solution has been to use outdoor cable in the conduit and then transition to the appropriately rated cable type once indoors. Drybit™ Category 6 cable from Proterial Cable America eliminates the time and cost associated with transitioning from outdoor cable to indoor-rated cable.
Call for Price
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
Product Highlights
- REACH & RoHS compliant.
- Made in USA.
- Guaranteed minimum performance.
- Tested from 1 to 555 MHz.
- UL Verified TIA-568-D.2
- UL Verified (UL B627696) for long term water submersion.
- UL Listed for use in plenum areas.
- UV resistant jacket.
- Specifically designed for below-grade conduit or other environments where water is likely to infiltrate.
- Ideal for industrial & harsh environments.
- Resistant to over 2,000 chemicals.
- No-gel construction simplifies termination.
- Drybit Barrier ensures optimum electrical performance even in harsh environments.
- Available in both UTP and FUTP.
- Standard jacket color is black. Custom colors available.
Product Details
Part Number
Plenum: 30315-8
F/UTP: 30277-8
F/UTP: 30277-8
Manufacturing Location
This product is produced and manufactured in the USA
Cable Rating
Plenum
Construction
Dual Layer Jacket, Plenum-rated Fluoropolymer Insulation
Shield
DryBitTM Barier or DryBitTM Barier with integrated sheild
Jacket Material
Low-smoke, flame-retardant thermoplastic
Jacket Colors
Standard Black; Custom Available
Calculated Cable O.D.
UTP: 0.310 inches (7.87 mm)
F/UTP: 0.310 inches (7.87 mm)
F/UTP: 0.310 inches (7.87 mm)
Cable Weight
UTP: 54.70 lb/1000ft (24.8 kg/305m)
F/UTP: 56.0 lb/1000ft (25.4 kg/305m)
F/UTP: 56.0 lb/1000ft (25.4 kg/305m)
Applications
HDBase-T
5 Gigabit Ethernet (IEEE 802.3bz)
2.5 Gigabit Ethernet (IEEE 802.3bz)
Gigabit Ethernet (IEEE 802.3ab)
100 Mbps Ethernet (IEEE 802.3u)
1000 Mbps ATM
622 Mbps ATM
15W PoE (IEEE 802.3af)
30W PoE+ (IEEE 802.3at)
60W PoE++ (IEEE 802.3bt Type 3)
100W PoE++ (IEEE 802.3bt Type 4)
5 Gigabit Ethernet (IEEE 802.3bz)
2.5 Gigabit Ethernet (IEEE 802.3bz)
Gigabit Ethernet (IEEE 802.3ab)
100 Mbps Ethernet (IEEE 802.3u)
1000 Mbps ATM
622 Mbps ATM
15W PoE (IEEE 802.3af)
30W PoE+ (IEEE 802.3at)
60W PoE++ (IEEE 802.3bt Type 3)
100W PoE++ (IEEE 802.3bt Type 4)
Storage Temperature
-40°C to +70°C (-40°F to +158°F)
Installation Temperature
0°C to +60°C (+32°F to +140°F)
Operation Temperature
-40°C to +70°C (-40°F to +158°F)
Electrical
Input Impedance
100 ± 15Ω (1.0 to 250 MHz)
Maximum Conductor Resistance
9.38 Ω/100 meters @ 20°C
Voltage Rating
300 Volts
Maximum Delay Skew
45 ns/30 meters
Nominal Velocity of Propagation (NVP)
70%
Ampacity
Refer to catalog for chart
Conductor
Gauge
23 AWG
Conductor Type
Bare Copper
Number of Conductors
8 (4-Pair)
Packaging
Quantity
1,000 foot
Reverse sequential footage markings standard on a 1,000 ft packages
Reverse sequential footage markings standard on a 1,000 ft packages
Features
Related products
-
Plenum, Copper Cables, Proterial
Plenum Category 6 XS Cable
The XS™ cable is Hitachi’s new entry-level Category 6 cable. The XS cable is UL Verified, sweep tested to 555 MHz and delivers electrical performance that exceeds the ANSI/TIA 568.D-2 standard.
Made in the U.S.A. at Hitachi’s Manchester, New Hampshire facility, the XS cable includes a number of design features intended to speed installation while also maximizing shipping capabilities and warehouse space. The XS CMP (plenum) utilizes a smaller box than previous designs, thus enabling more efficient use of space for both shipping and storage. Changes to the CMR (riser) version are underway and their completion will be in the near future. The XS contains no center spline typically found in Category 6 cables. This fillerless design results in one of the smallest outside diameters available for a Category 6 cable. This small outside diameter also permits the highest conduit fill rates of all Proterial Category 6 cables and one of the highest in the industry. The XS pulls smooth from the Reelex box and lays flat when dispensed. These characteristics enhance the installer experience by offering easier and faster pulls during installation. Its 24 AWG conductors help in limiting its outside diameter while also supporting Power over Ethernet applications such as the popular IEEE 802.3 af and at and the more demanding IEEE 802.3bt. It is also Hitachi’s greenest cable. It utilizes a brown box of 100% recycled cardboard for both CMP and CMR cables. This product package, since it has no chemical or waxy coatings, requires less resources to enter the recycle stream. It’s fillerless design also requires less materials than those with fillers and almost all of the materials used in its construction are from New England or northeast based companies.
Like all of Hitachi’s indoor Category 6 cables, the XS cable is eligible for our Lifetime product and performance warranty. The XS is available in a wide range of colors.
SKU: 30237-8-XXY -
F/UTP, Copper Cables, Proterial
F/UTP Category 6A Outdoor Single Jacket Cable
Proterial Cable America has a long history of designing and manufacturing advanced copper and fiber optic communication cables. Our Category 6A Outside Plant (OSP), cables are robust and designed to offer reliable performance regardless of the conditions in which they were installed. The outer jacket is made from a tough polyethylene to protect the cable core from water and the harsh sun. A gel-filled inner core prevents the migration of any water that may have breached the outer layers of protection. They are designed to support applications such as Gigabit and 10 Gigabit Ethernet as well as deliver power to outdoor Power over Ethernet (PoE) devices. Our Category 6A outdoor cables, like all other PCA copper and fiber communication cables, are made at the Manchester, New Hampshire facility.
SKU: 30348-8-XXY
