Shop By Brand
MicroDucts, MicroDucts Locatable, InnerDuct
MicroDucts Locatable 16/12mm – Dura-Line
Minimums may be required.
Call for Price
Compare
Perfect for Drops in FTTH applications, MicroDucts with a location wire for easy identification in the ground.
FEATURES
- Locatable MicroDuct drop
- 1 x 20 AWG insulated copper locate wire
- Multiple sizes to facilitate a wide variety of fiber drops
- Accommodates fiber drops from 1.2mm to 11mm and flat drop
- Larger sizes to a fit pre-connectorized drop
- Ruggedized with oversheath for harsh conditions
- Available in continuous lengths to facilitate placement
- Permanent SILICORE®ULF lining to lower friction and ease drop placement
- Additional sizes available upon request
DETAILS
- Footage/Meter Markings
- Internal Ribs
- Silicore® ULF
| Weight | 0.074 lbs |
|---|---|
| Dimensions | 1 × 0.06 × 0.05 ft |
Related products
-
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler SDR 1.660″ – Dura-Line
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.
SKU: 20000120 -
-
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 1000ft
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000132 -
InnerDuct Accessories, Couplers, InnerDuct
3.00″ Shur-Lock II Coupler SDR 3.500″ – Dura-Line
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.
SKU: 20000173
