The 1.6/5.6 Series is a European design and are well suited for the connection of both analog radio frequency and
digital signals. They operate from 0-1GHz and are designed with 75 Ohms impedance.
Due to their mechanical sturdiness and coupling mechanism they are recommended in equipment where there is a
particular need for resistance against environmental and mechanical stress.
They are available for a wide variety of flexible cable applications and are built in accordance with IEC 169-13 and DIN 47295.
The crimp version is also available to ensure high reliability in assembly and a lower cost installation. Furthermore, if
quick installation method is needed, the IDC version, which does not require soldering (insulation displacement contact), is
available as well. For the IDC version the operation frequency range goes from 0 up to 5Ghz.
APPLICATIONS
Base Stations
Cable Assemblies
Computer/LAN
Digital Distributors
Routers
Switching Equipment
Telecom
Wireless
SCREW
SLIDE-ON
PLUG
JACK
PLUG
JACK
PLUG-IN
PLUG
JACK
MECHANICAL CHARACTERISTICS
COMPONENT
FINISHING
MATERIAL
Jack Contact
Plug Contact
Insulator
Internal Parts
Other Parts
Au £ 2m on Ni
Au £ 2m on Ni
-
Ag 4 - 6m on Ni
Ni 3m
Beryllium copper
Brass
PTFE Teflon
-
Brass
DIMENSIONS - Subject to change without previous notice.
ELECTRICAL CHARACTERISTICS
Curve 1: Cable-mounted connector
Curve 2: Connector in isolation
Impedance
Operation Frequency
Reflection Coefficient
Contact Resistance
(plug-jack cable mounted)
- Internal to Conductor
- External to Conductor
Insulation Resistance in CNTP
Voltage Test
Operation Temperature
Handling and Insertion Test
75 V
£1000 Hz
Figure to the right
£4 mV
£2 mV
³106 MV
1,000V rms, 50Hz
- 55 to +150ºC
DIN 47295
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
INTERFACE STANDARDS
JACK SCREW TYPE
PLUG SCREW TYPE
JACK SNAP TYPE
PLUG SNAP TYPE
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
PANEL DRILLING DIMENSIONS
TYPE F1
TYPE F2
TYPE F3
TYPE F4
TYPE F5
TYPE F6
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
DIMENSIONS FOR CABLE CUTTING
Assembly type M1 - Dimensions for cable cutting for assembly in straight connectors (plug / jack)
Dimensions in mm
Assembly type M2 - Dimensions for cable cutting for assembly in angular connectors (plug and jack)
Dimensions in mm
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
STRAIGHT JACK FOR PANEL (SCREW ON), DRILLING TYPE F1
ASSEMBLY IN CABLE: M1
FIGURE
CODE
CABLE
OBSERVATIONS
67.08.01
67.08.02
67.08.00
77.92.00
78.79.02
78.79.00
78.79.01
67.08.07
67.64.00
67.64.02
77.91.00
67.08.04
67.08.03
77.90.00
0.4/2.5
0.4/2.5 2YC(ms)CY
0.4/2.6
0.5/3.0
0.7/4.4 2YC(ms)CY
0.7/4.4 2YCCY
0.7/4.4 2YCY
1.0/6.5 2YCCY
1.2/4.4 CCI TUBE
2.6/9.5 CCI TUBE
24 AWG
Amphenol _ 21 _ 597
RG 187 A/U
RG 59/U (0.6 x 3.7)
TZC 75024
0.45/2.0
0.3/1.8 T
0.3/1.4 DT
0.4/2.0 T
RG 6 A/U
CLAMP.
67.08.20
67.08.13
67.08.16
67.08.17
*67.08.05
STRAIGHT JACK FOR PANEL (SNAP ON), DRILLING TYPE F1
ASSEMBLY IN CABLE: M1
FIGURE
CODE
CABLE
OBSERVATIONS
67.14.01
67.14.00
67.14.12
67.14.13
67.14.14
67.14.15
77.69.00
67.14.02
77.53.00
77.84.00
0.4/2.5 2YC(ms)CY
0.4/2.6
0.3/1.8 T
3C 2W
3C 2T
0.3/1.9 DT
0.5/0.3 D2YC(ms)CY
0.4/2.5 2YCY
RG 187 A/U
RG 59/U (0.6/3.7)
CLAMP.
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE JACK FOR PANEL (SCREW ON), DRILLING TYPE F3
ASSEMBLY IN CABLE: M2 - FOR 1.5mm PANELS
FIGURE
CODE
CABLE
OBSERVATIONS
67.72.02-0
67.72.07-0
67.72.03-0
67.72.04-0
67.72.09-0
67.72.12-0
SQUARE BODY.
FRONT BODY
NICKEL PLATED.
CLAMP.
67.72.13-0
67.72.14-0
67.72.16-0
67.72.10-0
67.72.08-0
67.72.06-0
67.72.01-0
67.72.00-0
67.72.05-0
67.72.16-0
0.4/2.5
0.5/3.0
0.4/2.6
0.4/2.5 2YC(ms)CY
0.7/4.4 2YCCY
FLEX 2
0.3/1.9 DT
0.3/1.8 T
3C 2W
3C 2T
0.7/4.4 2YC(ms)CY
0.7/4.4 2YCY
24 AWG
Amphenol _ 21 _ 597
RG 187/U
RG 59/U
3C2T
CABLE
FIGURE
CODE
OBSERVATIONS
RIGHT ANGLE JACK FOR PANEL (SCREW ON), DRILLING TYPE F3
ASSEMBLY IN CABLE: M2 - FOR 1.5mm PANEL
67.72.02-1
67.72.07-1
67.72.03-1
67.72.04-1
67.72.09-1
67.72.12-1
67.72.13-1
67.72.14-1
67.72.16-1
67.72.10-1
67.72.08-1
67.72.06-1
67.72.01-1
67.72.00-1
67.72.05-1
67.72.16-1
0.4/2.5
0.5/3.0
0.4/2.6
0.4/2.5 2YC(ms)CY
0.7/4.4 2YCCY
0.3/1.9 DT
0.3/1.8 T
3C 2W
3C 2T
0.7/4.4 2YC(ms)CY
0.7/4.4 2YCY
24 AWG
Amphenol _ 21 _ 597
RG 187/U
RG 59/U
3C2T
SQUARE BODY.
FRONT BODY
GOLD PLATED.
CLAMP.
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE JACK FOR PANEL (SCREW ON), DRILLING TYPE F1 - ASSEMBLY IN CABLE: M2
FIGURE
CODE
CABLE
OBSERVATIONS
67.71.02-0
67.71.03-0
67.71.04-0
67.71.06-0
67.71.07-0
67.71.12-0
67.71.13-0
67.71.14-0
67.71.15-0
67.71.10-0
67.71.11-0
67.71.09-0
67.71.08-0
67.71.01-0
67.71.00-0
67.71.19-0
67.71.17-0
67.71.16-0
67.71.05-0
0.4/2.5
0.4 x 2.6
0.4/2.5 2YC(ms)CY
24 AWG
0.5 x 3.0
FLEX 2
0.3/1.8 T
3C2W
3C2T
0.3/1.9 DT
0.7/4.4 2YC(ms)CY
1.0/6.5 2YCCY
0.7/4.4 2YCCY
0.7/4.4 2YCY
Amphenol _ 21 _ 597
RG 187/U
TZC 75024
0.8/3.7
0.4/2.0
RG 59/U (0.6/3.7)
CABLE
SQUARE BODY.
FRONT BODY
NICKEL PLATED.
CLAMP.
FIGURE
CODE
OBSERVATIONS
67.71.02-1
67.71.03-1
67.71.04-1
67.71.06-1
67.71.07-1
RIGHT ANGLE JACK FOR PANEL (SCREW ON), DRILLING TYPE F1 - ASSEMBLY IN CABLE: M2
67.71.12-1
67.71.13-1
67.71.14-1
67.71.15-1
67.71.10-1
67.71.11-1
67.71.09-1
67.71.08-1
67.71.01-1
67.71.17-1
67.71.16-1
67.71.19-1
67.71.00-1
67.71.05-1
0.4/2.5
0.4 x 2.6
0.4/2.5 2YC(ms)CY
24 AWG
0.5/3.0
FLEX 2
0.3/1.8 T
3C 2W
3C 2T
0.3/1.9 DT
0.7/4.4 2YC(ms)CY
1.0/6.5 2YCCY
0.7/4.4 2YCCY
0.7/4.4 2YCY
Amphenol _ 21 _ 597
0.8/3.7
0.4/2.0
TZC 75024
RG 187/U
RG 59/U (0.6 x 3.7)
SQUARE BODY.
FRONT BODY
GOLD PLATED.
CLAMP.
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE JACK FOR PCB
FIGURE
CODE
DESCRIPTION
SCREW TYPE.
PANEL DRILLING TYPE F5.
88.04.00
SCREW TYPE WITH SOLDERING
TERMINAL FOR THE COAXIAL MESH.
PANEL DRILLING TYPE F5.
88.04.05
SCREW TYPE WITH STRAIGHT
CENTRAL CONDUCTOR.
PANEL DRILLING TYPE F6.
88.04.20
SCREW TYPE WITH STRAIGHT
CENTRAL CONDUCTOR AND SOLDERING TERMINAL FOR THE COAXIAL MESH.
PANEL DRILLING TYPE F6.
88.04.25
SNAP TYPE.
PANEL DRILLING TYPE F5.
88.04.40
SNAP TYPE WITH SOLDERING TERMINAL
FOR COAXIAL MESH.
PANEL DRILLING TYPE F5.
88.04.45
SNAP TYPE WITH STRAIGHT
CENTRAL CONDUCTOR.
PANEL DRILLING TYPE F6.
88.04.60
SNAP TYPE WITH STRAIGHT CENTRAL CONDUCTOR AND SOLDERING TERMINAL
FOR COAXIAL MESH.
PANEL DRILLING TYPE F6.
88.04.65
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE JACK FOR PCB
FIGURE
CODE
DESCRIPTION
SCREW TYPE, PANEL DRILLING TYPE F5,
WITH NICKEL PLATED FRONT BODY.
88.04.32-0
SCREW TYPE, DRILLING TYPE F5,
WITH GOLD PLATED FRONT BODY.
88.04.32-1
STRAIGHT JACK FOR PCB
FIGURE
CODE
DESCRIPTION
SCREW TYPE.
PANEL DRILLING TYPE F5.
88.04.30
STRAIGHT PLUG FOR CABLE
FIGURE
CODE
CABLE
DESCRIPTION
67.70.01
67.70.02
67.70.03
67.70.00
67.70.04
67.70.05
67.70.06
67.70.07
67.70.08
67.70.09
67.70.10
67.70.11
67.70.12
67.70.13
67.70.14
AMPHENOL-21-597
0.4/2.5
0.4/2.6
RG 187/U
0.4/2.5 2YC(ms)CY
RG 59/U
24 AWG
0.5/3.0
0.7/4.4 2YCY
0.7/4.4 2YCCY
0.7/4.4 2YC(ms)CY
0.3/1.8 T
3C 2T
0.3/1.9 DT
3C 2W
CLAMP.
ASSEMBLY IN CABLE M2.
SNAP TYPE.
88.98.00
77.80.00-0
67.12.14
67.12.20
67.12.13
67.12.12
67.12.03
67.12.02
67.12.01
67.12.00
67.75.03
77.80.00
78.76.01
*88.03.05
*88.10.00
78.76.00
88.03.00
RG 187/U
0.7/4.4 2YCCY
3C 2T
TZC 75024
0.45/2.0
3C 2W
0.3/1.8 T
0.3/1.9 DT
0.4/2.4 2YC(ms)CY
0.4/2.5
0.4/2.6
RG 6 A/U
0.5/3.0
0.7/4.4 2YCY
RG 6 A/U
1.0/6.5 2YCCY
0.7/4.4 2YCCY
RG 59 B/U
CLAMP.
ASSEMBLY IN CABLE M1.
SCREW TYPE.
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE PLUG FOR CABLE (SNAP)
ASSEMBLY IN CABLE: M2
FIGURE
CODE
CABLE
DESCRIPTION
77.34.01-0
77.34.02-0
77.34.03-0
77.76.00-0
67.02.00-0
67.02.01-0
67.05.00-0
77.77.00-0
77.78.04-0
77.78.02-0
77.34.00-0
67.46.00-0
0.4/2.5
0.4/2.6
0.4/2.5 2YC(ms)CY
RG 59/U (0.6 x 3.7)
0.7/4.4 2YCCY
0.7/4.4 2YCY
RG 187/U
24 AWG
0.3/1.9 DT
0.3/1.8 T
Amphenol _ 21 _ 597
RG 187/U
SQUARE BODY.
CLAMP.
RIGHT ANGLE PLUG FOR CABLE (SCREW)
ASSEMBLY IN CABLE: M2
FIGURE
CODE
CABLE
DESCRIPTION
67.11.01-0
67.11.04-0
67.11.05-0
67.11.06-0
67.11.07-0
67.11.02-0
67.11.00-0
78.80.02-0
78.80.00-0
78.80.01-0
*67.23.00-0
67.63.00-0
88.06.00-0
77.79.00-0
77.79.01-0
77.79.02-0
77.30.00-0
67.22.00-0
0.4/2.5
0.3/1.8 T
0.3/1.9 DT
0.4/2.0
TZC 75024
0.4/2.5 2YC(ms)CY
0.4/2.6
0.7/4.4 2YC(ms)CY
0.7/4.4 2YCCY
0.7/4.4 2YCCY
1.0/6.5 2YCCY
24 AWG
RG 59/U (0.6/3.7)
0.5/3.0
3C 2W
3C 2T
Amphenol _ 21 _ 597
RG 187/U
SQUARE BODY.
CLAMP.
BODY Æ1/2"
SQUARE BODY.
CLAMP.
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE PLUG (SCREW)
ASSEMBLY IN CABLE: M2
FIGURE
CODE
CABLE
DESCRIPTION
78.82.00-0
78.82.01-0
78.80.07-0
78.80.08-0
77.87.00-0
77.88.01-0
77.89.00-0
77.93.00-0
77.94.00-0
77.95.00-0
77.95.01-0
77.96.00-0
0.7/4.4 2YCCY
0.7/4.4 2YCY
1.2/4.4 CCI Tube
2.6/9.5 CCI Tube
RG 59/U
24 AWG
0.5/3.0
3C 2W
3C 2T
0.3/1.8 T
0.3/1.9 DT
0.3/1.9 DT
SQUARE BODY.
CLAMP.
STRAIGHT PLUG FOR PANEL, DRILLING TYPE F4 (SNAP)
ASSEMBLY IN CABLE: M1
FIGURE
CODE
CABLE
DESCRIPTION
67.73.03
67.73.04
67.73.05
67.73.06
67.73.07
67.73.08
67.73.09
67.73.10
67.73.14
67.73.15
0,4/2,6
0,4/2,5 2YC(ms)CY
RG 59/U
24 AWG
0,5/3,0
0,7/4,4 2YCY
0,7/4,4 2YCCY
0,7/4,4 2YC(ms)CY
AMPHENOL-21-597
0,4/2,5
CLAMP.
STRAIGHT PLUG FOR PANEL (SNAP), PANEL DRILLING TYPE F1, 1.5mm
FIGURE
CODE
CABLE
DESCRIPTION
67.75.03
RG 6 A/U
67.73.11
0,4 / 2,6
CLAMP.
67.73.12
0,7 x 4,4 2YCCY
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE PLUG FOR PANEL (SNAP),
PANEL DRILLING TYPE F4 - ASSEMBLY IN CABLE: M2
FIGURE
CODE
CABLE
DESCRIPTION
67.15.00-0
0.4/2.6
67.15.01-0
0.4/2.5
CLAMP.
77.89.00-0
0.5/3.0
78.82.00-0
0.7 x 4.4 2YCCY
STRAIGHT PLUG FOR CABLE (SCREW)
FIGURE
CODE
CABLE
DESCRIPTION
67.23.01
0.4/2.5 2YCY
67.23.03
0.45/2.0
CRIMP.
67.23.02
0.25/1.4
STRAIGHT JACK FOR CABLE (SCREW), DRILLING TYPE F2
FIGURE
CODE
CABLE
DESCRIPTION
67.18.01-0
0.4/2.5 2YCY
CRIMP.
NICKEL PLATED FRONT BODY.
67.18.03-0
0.45/2.0
67.18.04-0
(IN DEVELOPMENT)
0.25/1.4
STRAIGHT JACK FOR CABLE (SCREW), DRILLING TYPE F2
FIGURE
CODE
CABLE
DESCRIPTION
67.18.01-1
0.4/2.5 2YCY
CRIMP.
GOLD PLATED FRONT BODY.
67.18.03-1
0.45/2.0
67.18.04-1
(IN DEVELOPMENT)
0.25/1.4
RF connectors
169-13 IEC
1.6 / 5.6 (75 V) Series
RIGHT ANGLE PLUG FOR CABLE (SCREW)
FIGURE
CODE
CABLE
DESCRIPTION
67.75.02-0
0.25/1.4
CRIMP.
67.75.01-0
0.4/2.5 2YCY
RIGHT ANGLE JACK FOR CABLE (SNAP), DRILLING TYPE F2
FIGURE
CODE
CABLE
DESCRIPTION
67.78.03-0
0.3/1.8
NICKEL PLATED
FRONT BODY.
CRIMP.
67.78.02-0
0.25/1.4
67.78.01-0
0.4/2.5 2YCY
RIGHT ANGLE JACK FOR CABLE (SNAP), DRILLING TYPE F2
