Rack
Mount Patch Panels-Rack Mount Distribution Enclosures
Rack
Mount Enclosures-Rackmount Enclosures-Rack Mount Patch Panels-Rack Mount Fiber
Optic Patch Panels- 24 Port Fiber Optic Patch Panels-Indoor Fiber Optic Patch
Panels - 48 Port Fiber Optic Patch Panels-72 Port Fiber Optic Patch Panels- 144
Port Patch Panels (866)
342-3721----------------------------------------------(866)
650-DATA American
Tech Supply's rack mount enclosures and rack mount patch panels are designed for
direct termination of up to from 24 to 144 fibers. The RAC rack mount enclosure
series accommodates up to 12 modular panels and is equipped with routing guides
to limit bend radius and enhance strain-relief control. The heavy-duty metal body
provides excellent protection for the inside fibers. A large variety of connector
adapters are offered to meet your specific requirements. MTP module cassettes
and module pre-assemblies are available for easy fiber installation and management.
Fiber
Optic Enclosure Home Page For
a Complete Listing of Fiber Optic Products Click Here Call
Today at (866) FIBER-21 |
| |
ATS's
deluxe rack mount fiber distribution enclosures manufactured
by ICC and several other manufacturers including Emerson, Alcoa, 3M and Corningare
"cost-effective" enclosures designed to administer and protect up to
48, 72, or 144 ports of fiber connectors. This
deluxe model incorporates an aesthetically pleasing smoked Lexan swing down cover.
These enclosures utilize pull out trays for total access from the front, and are
ideal for use in areas with limited access or little room behind the rack. Four
VELCRO? ties and four plastic retainer clips are included for custom cable routing,
and for providing ample fiber storage and room to maintain minimum bend radius
requirements. The enclosure is manufactured from 16AWG galvanized steel with a
textured powder coated finish. |
36
Port Rack
Mount Fiber Optic Enclosure-
Rack Mount Fiber Patch Panel Part No. ATSRAC-1X
Dimensions: Width =
17'', Depth = 12'', Height = 1.75''
Weight (unloaded): 10.3 lbs.
Port
Capacity: 6-36
Features: 1U rackmount can be loaded with up to 3 panels with
6 to 36 port capacity. Reversible mounting bracket for 19'' or 23'' racks. 16-gauge
steel with black powder finish coat. Steel door at front and at rear with ¼
turn latches. Top lid removable at both front and rear. Cable management spools
in the rear of the enclosure and cable management rings to the front for jumper
management. Sliding tray for access to both front and rear. Large entry points
at front for easy jumper management, as well as "D" shaped cutouts at
rear for access of backbone cable. Accessory pack included with additional cable
management, label holders and screws for securing to rack and top panels. Labeling
kit included for clear and precise identification of ports.
Lead time: In
Stock, Immediate Shipment
------------------------------------
24
port Rack
Mount Fiber Optic Enclosure-
Rack Mount Fiber Optic Patch Panel Part No. ATSRAC-12X
Dimensions:
Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-24
Features: 2U rackmount can be loaded with 2 panels (6-,
8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension
brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable
top lid for easy access to fiber. Spools at the rear for neat and clean cable
management.
Lead time: In Stock, Immediate Shipment
48
Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATSRAC-24X
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded):
12 lbs.
Port Capacity: 6-48
Features: 2U rackmount can be loaded with
4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available
with extension brackets for 23'' rack. 16-gauge steel with black powder finish
coat. Removable top lid for easy access to fiber. Spools at the rear for neat
and clean cable management.
Lead time: In Stock, Immediate Shipment
72
Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATS
RAC-2X
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded):
12 lbs.
Port Capacity: 6-72
Features: 2U rackmount can be loaded with
6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available
with extension brackets for 23'' rack. 16-gauge steel with black powder finish
coat. Removable top lid for easy access to fiber. Sliding tray for high-density
situations. Spools at the rear for neat and clean cable management.
Lead time:
In Stock, Immediate Shipment
144
Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X
Dimensions: Width = 17'', Depth = 12'', Height = 7''
Weight (unloaded): 11.5
lbs.
Port Capacity: 6-144
Features: 4U enclosure can be loaded with 12
panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with
extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder
finish coat.
Lead time: In Stock, Immediate Shipment