Atek Communications is a national data cabinet supplier and as a data cabinet distributor can offer a wide selection of manufacturers for your specific tlelecommunications needs. Atek Communications is a data cabinet distributor and carries a complete line of data cabinets, data enclosures, open bay racks, relay racks, LAN racks, enclosures, fiber optic enclosures, Zone 4 Racks, zone 4 data cabinets and seismic cabinets for data centers, communication closets, and communications centers. We also have Zone 4 data cabinets and zone 4 realay racks for earthquake enclosures preparedness and national security. The zone 4 seismic data cabinets are a new line of proven technology from Xmark designed specifically for Zone 4 earthquake requirements. We carry zone 4 racks manufactured by ESW (formerly Encore), Quest, Hoffman, Great Lakes,Synergy, Xmark and others for Zone 4 data cabinet earthquake applications and zone 4 enclosure environments. These zone 4 racks or zone 4 enclosures are built out of 10 gauge steel and this steel welded Channel rack has been designed for the Bell System and has been tested and approved to Pacific Bell Static Seismic Test PBS-000-102PT.
Seismic Cabinets.ets.
Knurr Miracel 19" Distribution Rack – Network Rack NS 25
Miracel NS25 (Width 800mm) |
Order Number |
type |
nominal depth |
chassis depth |
installation height |
nominal height |
weight |
|
|
T [mm] |
t [mm] |
h [U] |
h [mm] |
H [mm] |
[kg] |
|
with side panels |
600 |
365 |
41 |
1852 |
2120 |
112 |
01.136.044.1 |
41 |
1852 |
2120 |
112 |
01.136.044.8 |
800 |
565 |
41 |
1852 |
2120 |
120 |
01.136.050.1 |
41 |
1852 |
2120 |
120 |
01.136.050.8 |
46 |
2052 |
2320 |
130 |
01.136.051.1 |
46 |
2052 |
2320 |
130 |
01.136.051.8 |
900 |
665 |
41 |
1852 |
2120 |
124 |
01.136.056.1 |
41 |
1852 |
2120 |
124 |
01.136.056.8 |
46 |
2052 |
2320 |
134 |
01.136.057.1 |
46 |
2052 |
2320 |
134 |
01.136.057.8 |
1000 |
740 |
41 |
1852 |
2120 |
140 |
01.127.970.1 |
41 |
1852 |
2120 |
140 |
01.127.970.8 |
without side panels |
600 |
365 |
41 |
1852 |
2120 |
103 |
01.136.244.1 |
|
|
|
|
|
800 |
565 |
41 |
1852 |
2120 |
109 |
01.136.250.1 |
41 |
1852 |
2120 |
109 |
01.136.250.8 |
900 |
665 |
41 |
1852 |
2120 |
118 |
01.136.256.1 |
41 |
1852 |
2120 |
118 |
01.136.256.8 |
1000 |
740 |
41 |
1852 |
2120 |
128 |
01.127.975.1 |
41 |
1852 |
2120 |
128 |
01.127.975.8 |
|
|
|
|
|
|
|
|
Miracel 19" Distribution Rack – Network Rack NS 25 |
|
|
|
|
|
|
■ installation of chassis runners and 19" shelves possible
■ with fixed 19" built-in unit on the front and rear
■ for built-in units in accordance with IEC 297 3
■ flexible assembly of the built-in units using T slots
■ cable entry via plinth and cover
■ heat loss discharge via ventilation dome
■ door opening angle 180°
Variants
Type 1
■ single rack (with side panels)
Type 2
■ rack for rack suite (without side panels)
For the installation of
■ 19" components on the front and rear
■ equipment with maximum width of 450 mm
■ installation accessories
Jumpering compartment
■ front 123 mm
Load rating
■ 5000 N static
Degree of protection
IP 40 (upgradeble to IP 55)
Tests
■ earthing according to VDE 0100 P 540
■ vibration test according to MIL-STD 810 E
■ IP test according to DIN 40 050 / IEC 529
Material / Finish
■ basis rack, extruded aluminium, polished
■ corner pieces, die-cast aluminium, polished
■ cover zinc-plated sheet steel, powder-coated textured
■ doors, sheet steel, ,powder-coated structure, glass infill front door, single security-glass panel, 4 mm
■ multifunctional members an 19"-extrusions sheet steel, zinc-plated
Colour
Final digit of order number .1:
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 7035 light grey
Final digit of order number .8:
■ Door trim RAL 9011 black
■ Visible surface of the cover RAL 70321 black grey
Supply schedule
type 1
1 basic unit
4 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5
2 multifunctional frame for cable clamping and universal assembly options
1 cover with ventilation dome and integrated cable entry
1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 rear doors, sheet steel, with handle and fixing for locking cylinders
2 side panels with quick locking
1 plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 lateral plinth trim, closed
2 plinth trims for front and rear, with airing vents and fixing for filter mat
1 complete earthing test (VDE 0100)
type 2
1 basic unit
4 19" aluminium vertical extrusions with T slot and increment slide for spring nut M5
2 multifunctional frame for cable clamping and universal assembly options
1 cover with ventilation dome and integrated cable entry
1 front door, single-winged, single security glass panel, with handle and fixing for locking cylinders
1 rear doors, sheet steel, with handle and fixing for locking cylinders
1 plinth for cable entry on the side and rear with levelling feet (0-25 mm)
2 plinth trims for front and rear, with airing vents and fixing for filter mat
1 complete earthing test (VDE 0100)
How supplied
■ assembled
Please note
Rack suites
To create a rack series with the rack number n, you require:
(n-1) racks without side panels
1 rack with side panels
In a rack suite, per connection you require a set of suite connectors BN 01.130.935.7
|
|
|
|
|
|
We now have all types of data cabinets & racks for DATA CENTERS data cabinets- more info
Atek Communications offers Newton Data Cabinets, Hoffman Data cabinets, Quest Data Cabinets, ESW Data Cabinets, Cooper Data Cabinets, B-Line Data Cabinets, Quest Data Cabinets, and cabinets from other manufacturers by request.
Quality World Class Data Cabinets, Data Enclosures and Racks From Knurr
LAN Rack Accessories- Keyboard trays-Shelves KVM Switches
We carry cable management racks, Wallmount Rack and wallmount rack solutions for applications ranging from data centers, server rooms, to all office envrironments. Not only will ATS will meet or beat all US based pricing- but will assist you in designing your network at NO EXTRA CHARGE. Call us for details at (866) 342-3721.
Wall Mount Racks and LAN Stations from ICC,Signamax, Hoffman,Ortronics,Kendall Howard and more.
Encore- ESW Data Cabinets
Advantage Series Data Cabinet
Cabinets built for the future of your data communications network. |
Zone 4 rated Data CabinetsSurvive the Big One
The MAG VII has been tested to withstand seismic stress equal to 7.1 on the Richter Scale |
Cablelogic Data Cabinet
Easily manage and access your cabling with CableLogic Enclosure Frames. |
Wallbox Data Cabinet
The entire wallbox is able to swing away from the wall, offering convenient access to equipment. |
NEMA Data Cabinet
Constructed of either aluminum or stainless steel and are designed to protect against the elements. |
Rack Mount Shelves- Rack Mount Enclosures
Rack Mount Shelves Fiber Optic Rack Mount Enclosures
Standard equipments racks are designed for 19 inch rack mount equipment. Racks are constructed of aluminum and are available in a variety of standard heights. Each rack is drilled and tapped on both the front and the rear rails with 10-32 holes on EIA spacing. Standard rack finish is black. Racks are packaged knocked down for easy shipment.
Additional Data Cabinets- Data Racks- Data Enclosures - Wall Mount Enclosures-Seismic Racks
Lan Racks
This server rack is designed for applications that require the highest quality and versatility. For rackmount or tower servers.
|
Server Racks
This server rack is designed for applications that require the maximum amount of airflow and still retain the security of locked doors. Perfect for rackmount or tower servers that run particularly hot.
|
Server Cabinets
The FRS series server rack / cabinet is designed for applications that require the highest quality and most advanced features. These server racks /cabinets provide quality, protection and security for your mission critical equipment. Excellent for servers on roll-out glides.
|
Zone 4 Racks-Seismic Racks
Based on the standard, patented frame design of our RS, RSP and FRS server rack series, this NEBS compliant configuration has been tested and certified to meet Telcordia (Bellcore) GR-63-CORE requirements for ZONE 4 seismic earthquake environments.
|
Heavy Duty Server Racks
Server rack frame features 3 sets (6 rails) of adjustable universal vertical rackmount rails: |
Economy Server Cabinet
Complete with Perforated front
and split level rear door
42u, 39" usable depth
(33" rack depth) |
Telco Racks-Network Racks
19", 23", 24" widths
This heavy duty Telco server rack is constructed of high-grade 6063-T5 extruded aluminum. Shown with optional shelves, accessories
70", 77" and 84"h available
|
Open Server Relay Rack
This 4 post Relay Rack is ideal for rackmount servers, KVM switches, network equipment. etc. Suitable for rackmount equipment where security at the rack level is not required.
|
|
WallMount Rack Cabinet
Attractive, secure wall mount rack cabinet comes in a variety of heights and depth. This pivoting, sectional wall cabinet is ideal for larger systems in both secured and non-secured areas.
|
Modular Server Rack-Desk Top Racks
Durable, lightweight, stackable and completely portable. Great for small closets, under the desk or countertops. Never run out of rack space again!
|
Portable Rack Mount Cases
Meets Military Standard
Available Empty, with Cubed Foam or with Dividers
Wheels & pull handles
available on some
Waterproof
2.62 times the impact resistance of Pelican, and 3.32 times the impact resistance of
Hardigg Storm
|
Cable Management Racks
Cable Management Racks combine the features of a high quality relay rack, as well as effective cable routing and raceway facilities, all in one complete unit. All aluminum cable management rack allows for the mounting of a wide variety of 19 inch wide patch panels, hubs, switches, and related rack mount equipment. The rack is supplied with cable hangers, cable ties and generous provisions for organizing incoming cables for termination with effective patch cord management on the front. Racks are shipped with all assembly required plus an accessory pack that includes 20 cable ties, 16 cable hangers, 40 cuphead mounting screws, and grommeting for cable routing cutouts.
Standard equipments racks are designed for 19 inch rack mount equipment. Racks are constructed of aluminum and are available in a variety of standard heights. Each rack is drilled and tapped on both the front and the rear rails with 10-32 holes on EIA spacing. Standard rack finish is black. Racks are packaged knocked down for easy shipment.
Part Number |
Cable Management Rack Description |
1977-1032B |
Signamax Cable Management Rack, 19"W x 84"H, Black Finish, 10-32 Holes |
Cable Management Racks
Part Number |
Cable Management Rack Description |
RR-84B |
Signamax Equipment Rack, 19"W x 84"H, Black Finish, 10-32 Holes |
RR-48B |
Signamax Equipment Rack, 19"W x 48"H, Black Finish, 10-32 Holes |
RR-84 |
Signamax Equipment Rack, 19"W x 84"H, Milled Finish, 10-32 Holes |
RR-48 |
Signamax Equipment Rack, 19"W x 48"H, Milled Finish, 10-32 Holes |
41U 1930 Series Rack- Data Cabinet- -Part Number ATS41U1930
This rack is a great all around entry level racking system. Its simple design offers just about everything you need in a rack from ventilation and cooling to fully adjustable rails and removable side panels.
Features:
Standard EIA 19" Rack with cage nut style rails
Aluminum front and rear doors frames
Steel removable side doors, vertical rails, top and bottom covers
Front door with acrylate
Rear door with free air cooling
Both front and rear doors equipped with key lock for security
Removable and adjustable vertical rails
Ground screws
Lockable wheels
2 x 12cm low noise AC fan on top cover
1 x 6 outlet 110V AC power strip
Package information:
Ships LTL or common carrier
Dimensions: W.24.8� x H. 74.88� x D. 35.43�
Net Weight: 198Lbs
Shipping Weight: 220Lbs
MEAS: 39 cuftw
41U 1931 Series Rack
This rack is the best of the best in racking cabinets. Its frame is made from extruded 6063 Aluminum for maximum strength and durability. Each of these racks ships complete with all accessories included and installed complete. Our 41U rack is also EIA compliant and has a 10 year limited warranty on parts.
Features:
30" Rail to rail usable depth
Front and rear fully adjustable cage nut style rails (4 total)
Lift off side panels for easy access.
Semi-vented locking front door with integrated glass
Fully perforated locking rear door
Bottom panels remove for cabling
Dual ultra-quite topside fans remove ambient heat
6� power strips added for convenience.
4 heavy duty swiveling lockable casters
4 leveling feet
100 cage nuts
100 rack screws
Shipping options:
LTL � call for pricing
Door to Door available (they will deliver to your offices server room
XUS84-XL Ultra Server Exclusive Features
Zone 4 Data Cabinets- Zone 4 Racks
The
Zone 4 Seismic Cabinet was extensively tested by an independent testing facility
and passed with flying colors. It was subjected to static load test conditions
and Zone 4 earthquake vibration test conditions in accordance with NEBS document
TR-000063, Issue 4, 1992. There was no visible evidence of damage or deterioration
to the cabinet as a result of the earthquake vibration test. The maximum displacement
of the cabinet did not exceed the simple amplitude of 3 inches. More information
as well as test results are available upon request.
Atek Communications carries a complete line of relay racks,ladder racks, data cabinets, raceway systems, distribution racks, cable management racks and enclosures for very application from the telephone closet to the network room to your co-location data center.We now have available Hendry rack systems and Newton racks for all you central office and data center needs. Call us today for a price quote at (866) 650-DATA. ATS , founded in 1992, has become a leading supplier of quality telecommunication equipment including computer cabinets, server racks, LAN work centers, printer stands, data cabinets, computer workstations, wire racks and KVM switches to IT centers. With offices located throughout the United States, we serve all regions of the United States and Canada. ATS specializes in providing quick solutions and quality products at discount prices that help organize and secure rackmount equipment.
.
We Now Carry Hendry & Newton Racks and Accesories
We have data cabinets (models ATS4232F ATS4240F ATS2740F ATS2732F) that can ship same day! Call us today at (866) 342-3721 for more info- or click on this link for more info on our same day data cabinet shipping. We carry data cabinets from several manufacturers that allow upis high on fine styling and value-for-money features. It has been designed and engineered specifically for easy assembly and rapid equipment integration at site.
Its innovative design is based on the use of aluminum profiles for the four vertical pillars, which are connected solidly to two welded steel end-frames. This results not only in low weight and an elegant appearance, but also permits quick assembly. Due to the rigidity provided by the steel end-frames, our data cabinet is able to handle equipment loads of up to 770 to 1500 lbs. This means it an ideal choice for mid-range use as a Server enclosure, or for network cabling purposes.
These zone 4 racks and zone 4 enclosures are designed for maximum protection for
very application from the telephone closet to the network room to your co-location
data center. Call us today for a price quote at (866) 650-DATA.
We
Now Carry Hendry Zone 4 Racks & Zone 4 Enclosures
West
Coast (866) 342-3721 East
Coast (866) 650-DATA
We
are Updating Our Website- Please Call Us Your Hendry Part Number and We WIll Provide
You With An Immediate Quote
Zone
4 Racks
Zone 4 Data Cabinets
STANDARD
FEATURES
* All racks are drilled and tapped to receive guard rails, cable rings and accessories.
* Holes are provided in sides for joining racks or mounting ladder end guards.
* All racks are equipped with top angle, base angle and bolts for assembly.
* Order guard rails and accessories as required.
* Different RMU options are
available. See the Options and Ordering Information page.
*
All racks are drilled and tapped to receive guard rails, cable rings and accessories.
* Holes are provided in sides for joining racks or mounting ladder end guards.
* All racks are equipped with top bars, base angles and bolts for assembly.
* Racks over 8'-0" should be ordered with a top angle. Order option D.
* Order guard rails and accessories as required.
* Different RMU options are
available. See the Options and Ordering Information page.
* This steel welded Channel rack has been designed for the Bell System and has
been tested and approved to Pacific Bell Static Seismic Test PBS-000-102PT.
* Overhead bracing is required for seismic installations.
* All racks are
drilled and tapped to receive guard rails, cable rings and accessories.
*
Holes are provided in sides for joining racks or mounting ladder end guards.
* Welded construction is used on the basic frame shown.
* 3" high top
angle may prevent mounting of deep equipment in top mounting space.
* Order
seismic anchor kit, 02100-19, separately.
* Order guard rails and accessories
as required.
* Different RMU options are available. See the Options and Ordering
Information page.