Fiber Optic Telephone Extenders

FIBER OPTIC TRANSMISSION PRODUCTS

     About Us

?2010 American Tech Supply

TC 1903 Telephone Extender- TC Telehone Extenders-Fiber Optic Telephone Extenders- Fiber Telephone Extenders

American Tech Supply carries a complete line of fiber optic telephone extenders ranging from simple "quick talk" extenders to multi-line (24 channel) PBX line extenders allowing you to use existing fiber optic cable to run your voice needs over 2 fiber strands or install fiber optic cable one time and use fiber optics for security proof voice, data, IP, video services on one media- fiber

Packaged in a small, modem-sized form factor, the TC1903 "Quick-Talk" Fiber Optic Phone Extender extends analog and POTS telephone service to remote sites.

Features

  • Extend Telephone Link with Fiber or Async RS-232
  • PBX and Key System Compatible
  • Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
  • Built-In Dry Contact Relay for External Alarm and Ringer Connection
  • 12VDC Power Supply, Optional 24VDC or 115/230VAC with Power Adapter
  • Built-In Power Redundancy
  • High Temp or Extreme Temp Options
  • Rackmount or Standalone
  • Tested and Compatible with:
  •  

    Applications

    The TC1903 is often used to extend telephone service in campus networks, power plants, substations, etc or use an existing service data channel to set up a telephone link. It is also used to set up "hot" telephone service via fiber optic networks. Other applications include taking advantage of the inherent benefits of fiber optics to reduce noise/EMI or maximize security/isolation.

Specifications

Audio Bandwidth
  1. Bandwidth300Hz to 3.4Khz
Optical
  1. TransmitterLED/ELED
  2. ReceiverPIN Diode
  3. Wavelength850nm/1300nm Multimode, 1300nm/1550nm Single Mode
  4. Fiber Optic ConnectorsST or SC
  5. Loss Budget * - 850/1300/1550nm
  6. Multimode @62.5/125µm15dB
  7. Single Mode @9/125µm20dB
Electrical
  1. Phone ConnectorRJ11 Female
  2. Ring Voltage80Vrms at 20Hz (Depending on the ringing load)
  3. FXO Input Impedance600 Ohm
  4. FXS Output Impedance600 Ohm
Visual Indicators
  1. Tx and Rx volume, Local off-hook, Remote off-hook, FXOYes
  2. FXS, Ring, Optic Rx, Electric Rx, VccA, VccB, PWR A, PWR BYes
Alarm / Ring
  1. Dry ContactNormal OPEN
Power
  1. Standard12VDC @500mA
  2. Optional24VDC or 115/230VAC with Power Cube
Temperature
  1. Operating-10°C to 50°C
  2. Optional-20°C to 70°C
  3. Storage-40°C to 90°C
  4. Humidity95% non-condensing
Physical (Standalone Unit)
  1. Height(3.53 cm) 1.39"
  2. Width(18.13 cm) 7.14"
  3. Depth(16.59 cm) 6.53"
  4. Weight(544 gm) 1.2 lbs

Fiber Optic Telephone Extenders & Analog Multiplexers

    Fiber Telephone Extender Fiber Telephone Extender Async RS232

    Compatible with PBXs & Key Systems, the TC1900/1 "Quick-Talk" Phone Extender extends voice over Async RS-232 or Fiber into a voice network by plugging in an analog telephone.

    Applications

    The TC1900/1901 is often used to extend telephone service in campus networks, power plants, substations, etc or use an existing service data channel to set up a telephone link. It is also used to set up "hot" telephone service via existing RS-232 links on satellite, fiber optic or microwave networks. Other applications include using the inherent benefits of fiber optics to reduce noise/EMI or maximize security/isolation.

 

    Telephone-over-Ethernet Extender (10BaseT)

    The TC1910 Ethernet Telephone Extender provides toll quality telephone service over LANs. Compatible with POTS Key Systems and PBXs, it has a built-in Codec that digitizes voice and converts to packets for transmission between local and remote TC1910s with designated IP addresses.The TC1910 is intended to provide flexible point-to-point telephone service via Ethernet Networks. It is often used by maintenance or service personnel in Campus, Traffic Control, or Utility Substation Networks.

 

    Fiber Optic Telephone Extender (w/ 1-Fiber Bi-Directional Option)
    Packaged in a small, modem-sized form factor, the TC1903 "Quick-Talk" Fiber Optic Phone Extender extends analog and POTS telephone service to remote sites. The TC1903 is often used to extend telephone service in campus networks, power plants, substations, etc or use an existing service data channel to set up a telephone link. It is also used to set up "hot" telephone service via fiber optic networks. Other applications include taking advantage of the inherent benefits of fiber optics to reduce noise/EMI or maximize security/isolation

 

    The TC8938 is often used in Crash Phone network applications in airports. Up to 8 users can be linked into one phone-line conversation.

    For example, if an emergency at an airport occurs, picking up the master phone in the control tower will automatically ring all remote telephone extensions. Remote extensions could be located at local police, fire, ambulance and health facility locations. Up to 8 users can be linked into one phone-line conversation. A PBX is not required.

    ?

     

    TC8930-PBX and Key System compatible, the TC8930 Party-Line Digital Mixer allows network telephone users to have a conversation with 7 other users on the same
    Party-Line Digital Mixer (4/8 ports)The TC8930 is often used in partyline phone applications. Up to 8 users can be link into a party-line conversation.

     

    TC8800E-Telephone Analog Multiplexers
    Telephone, Analog Data Fiber Optic Multiplexer (hot-swappable 4-28 channels
    Extend up to 28 telephone, data & analog channels to remote network sites with the TC8800 Fiber Optic Multiplexer.

     

     

     

    TC8800S/R-Telephone, Analog & Data Multiplexer - TC8800S/R

    Extend up to 28 telephone, data & analog channels to remote network sites with the TC8800 Fiber Optic Multiplexer.

    TC8000- Analog , Intercom & Data Multiplexer - TC8000

    The TC8000 is a specialized 4-28 channel 2/4-Wire Analog, Audio, Intercom & Data Fiber Optic Multiplexer with hot-swappable chassis & high temperature options.

    TC8520-Telephone, Ethernet & Data Multiplexer - TC8520

    The TC8520 Telephone, Ethernet & Data Fiber Multiplexer combines 2-wire Analog POTS or 2/4-wire 600 Ohm Analog, 10/100 Ethernet & Serial Data over fiber optics.

Fiber Optic Telephone Extenders-Fiber Optic Modems-T1/E1 Fiber Optic Modems- T3/ E3 Fiber Optic Modems- Async/Sync Fiber Optic Modems- Fiber Optic Transceivers- Fiber Optic Multiplexers- Ethernet Media Converters- Telephone Extenders-Fiber Optic Media Converters

Call Us Today Toll free At (866) 342-3721 or (866) 650-DATA

Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

Our fiber optic modems are available from several different manufacturers including TC Comm, Opterna, Omnitron, Allied Telesyn, Opticomm, and others. Our Fiber Optic Transmission products are ideal for Data, Voice, Ethernet, T1/E1, T3/E3 & Audio for campus & intra-building fiber optic networks.

 

Quick Talk RS-232 TC-1900 Fiber Telephone Extender- Prices Start at $1095 each

Quick Talk TC-1900 Fiber Optic Telephone Extender

Telephone fiber modem, telephone fiber converter, telephone to fiber multiplexer, telephone fiber mux, analog phone to fiber, POTS, 2-wire

"Quick-Talk" RS-232 or Fiber Telephone Extenders
(Model TC1900/TC1901*) Prices Start at $980.00 ea.

Extend Telephone Link via Fiber or Async RS-232
Async Baud Rate From 19.2Kbps
16 LEDs/4 DIP Switches for Diagnostics
PBX and Key System Compatible, FXO/FXS Selectable
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
Built-In Dry Contact Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC, or 115/230VAC with Power Adapter

Applications
The TC1900/1901 is often used to extend telephone service in campus networks, power plants, substations, etc or use an existing service data channel to set up a telephone link. It is also used to set up "Hot Links" telephone service via existing RS-232 links on satellite, fiber optic or microwave networks. Other applications include using the inherent benefits of fiber optics to reduce noise/EMI or maximize security/isolation.

Our fiber optic modems are available from several different manufacturers including TC Comm, Opterna, Omnitron, Allied Telesyn, Opticomm, and others. Our Fiber Optic Transmission products are ideal for Data, Voice, Ethernet, T1/E1, T3/E3 & Audio for campus & intra-building fiber optic networks.

Telephone & Analog Multiplexers

    TC8800E-Telephone Analog Multiplexers
    Telephone, Analog Data Fiber Optic Multiplexer (hot-swappable 4-28 channels
    Extend up to 28 telephone, data analog channels to remote network sites with the TC8800 Fiber Optic Multiplexer.
    ?

    TC8800S/R-Telephone, Analog Data Multiplexer - TC8800S/R Extend up to 28 telephone, data analog channels to remote network sites with the TC8800 Fiber Optic Multiplexer.

    ?

    TC8000- Analog , Intercom Data Multiplexer - TC8000
    The TC8000 is a specialized 4-28 channel 2/4-Wire Analog, Audio, Intercom Data Fiber Optic Multiplexer with hot-swappable chassis high temperature options.

    ?

    TC8520-Telephone, Ethernet Data Multiplexer - TC8520

    The TC8520 Telephone, Ethernet Data Fiber Multiplexer combines 2-wire Analog POTS or 2/4-wire 600 Ohm Analog, 10/100 Ethernet Serial Data over fiber optics.

Fiber Optic Telephone Extenders-Fiber Optic Modems-T1/E1 Fiber Optic Modems- T3/ E3 Fiber Optic Modems- Async/Sync Fiber Optic Modems- Fiber Optic Transceivers- Fiber Optic Multiplexers- Ethernet Media Converters- Telephone Extenders-Fiber Optic Media Converters

Call Us Today Tollfree At (866) 342-3721 or (866) 650-DATA

Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

Quick Talk RS-232 TC-1900 Fiber Telephone Extender- Prices Start at $1095 each

Quick Talk TC-1900 Fiber Optic Telephone Extender

Telephone fiber modem, telephone fiber converter, telephone to fiber multiplexer, telephone fiber mux, analog phone to fiber, POTS, 2-wire

"Quick-Talk" RS-232 or Fiber Telephone Extenders
(Model TC1900/TC1901*) Prices Start at $980.00 ea.

Extend Telephone Link via Fiber or Async RS-232
Async Baud Rate From 19.2Kbps
16 LEDs/4 DIP Switches for Diagnostics
PBX and Key System Compatible, FXO/FXS Selectable
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
Built-In Dry Contact Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC, or 115/230VAC with Power Adapter

Applications
The TC1900/1901 is often used to extend telephone service in campus networks, power plants, substations, etc or use an existing service data channel to set up a telephone link. It is also used to set up "Hot Links" telephone service via existing RS-232 links on satellite, fiber optic or microwave networks. Other applications include using the inherent benefits of fiber optics to reduce noise/EMI or maximize security/isolation.

Applications
The TC1900/1901 is often used to extend telephone service in campus networks, power plants, substations, etc or use an existing service data channel to set up a telephone link. It is also used to set up "Hot Links" telephone service via existing RS-232 links on satellite, fiber optic or microwave networks. Other applications include using the inherent benefits of fiber optics to reduce noise/EMI or maximize security/isolation.

Description

The TC1900/1901 "Quick-Talk" Phone Extender can turn a fiber optic network or RS-232 circuit into a voice network simply by plugging a telephone set into an RJ-11 connector. It is compatible with most PBXs or Key Systems.

Quick-Talk is typically used to extend dial-up phone service to remote sites over a fiber optic (TC1901) or RS-232 circuit (TC1900). For example, a user can extend a secured phone link to a remote site via an existing satellite or microwave RS-232 data connection. With the optional fiber optic front end, Quick-Talk can extend a phone line up to 20 miles away.

Quick-Talk provides 2-wire FXS (foreign exchange subscriber) on the telephone side with ring down capability and FXO (foreign exchange office) on the PBX side. When both sides are set to FXS, a "Hot Link" can be established; when one side lifts up the handset, the other side starts ringing.

Available in standalone (TC1900S) or rackmount (TC1900R) versions, it is compatible with all popular types and sizes of fiber optic cable. Diagnostic aids include 16 diagnostic LEDs for indicating power, ring, FXS, FXO, and audio activity. The TC1900R PC Card version fits into TCRM191 and TCRM195 rackmount card cages.

Quick-Talk is available with RS-232 or optical interfaces. The optical interface is available in multimode (850/1300nm) or single mode (1300/1550nm) versions, with ST, FC or SC connectors. A local dry contact relay is also provided for external alarm and ringer connection.

Power is 12VDC or 115/230VAC with an external power cube. 24VDC is optional. Power redundancy is standard. Electrical connectors are RJ-11 Female for both the telephone set & RS-232 connections.
*For ordering purposes, the TC1900 is the RS-232 version. TC1901 is the fiber version.

Order Today-Call (866) FIBER-21

TC1910 Fiber Optic Telephone Extender--Prices Start at $995.00

TC1910 Fiber Optic Telephone Extender

Extends Telephone Link via 10 Base-T Ethernet Connection
Connects to Full Duplex Devices: Switches, Routers, Bridges, Transceivers, etc.
Automatic Power-Up, Recovery Connection
Web-Based Configuration Interface
PBX & Key System (POTS) Compatible, FXO/FXS
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
18 LEDs for Diagnostics & Status Monitoring
Built-in Dry Contact Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC or 115/230VAC with Power Adapter

Description

The TC1910 Ethernet Telephone Extender enables telephone service over a LAN via 10Base-T Ethernet connections. It has a built-in Codec that digitizes voice and converts to packets for transmission between local and remote TC1910s with designated IP addresses. It is compatible with PBX and Key Systems (POTS).

LAN connections can be made by most types of Full Duplex Ethernet devices, including switches, routers, bridges, transceivers, etc. A Web-based Configuration user interface (most browsers including Microsoft Windows Explorer, etc.) is provided to view network settings or change IP addresses from the factory default.

Phone connection is automatic upon power-up or when network interruption is restored. Depending on network traffic, multiple pairs of TC1910s can be used to set up individual point-to-point telephone links. A hardened temperature version (-20° to 70°C), Model TC1910T, is available for harsh environments.

The TC1910 provides Toll Quality sound within voice bandwidths from 300Hz to 3.4KHz. Two types of voice applications are supported: one, connecting to a PBX for outside telephone service; two, setting up a "hot link" point-to-point connection, e.g. between two work stations, within a LAN. Two-wire FXS (foreign exchange subscriber) is provided on the telephone side with ring down capability and FXO (foreign exchange office) on the PBX side.

Eighteen LEDs for network status, phone status, power and volume are provided to enhance status monitoring and diagnostics. Dry contacts for external alarm and ringer are standard.

The TC1910 is available in standalone (TC1910S) or rackmount (TC1910R) versions. The rackmount versions fit into TCRM191 or TCRM195 19" Rackmount Card Cages. Power is 12VDC or 115/230VAC with an external power cube. 24VDC power is optional. Power redundancy is standard. Phone connectors are RJ-11 Female and 10Base-T connectors are RJ-45 Female


Call Us Today Tollfree At (866) 342-3721 or (866) 650-DATA

Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives

 

 

 

 

 

 

 

Bend Bright Fiber Assemblies

 

Fiber Optic Adapters

foa8mm01.gif (11826 bytes)

 

Fiber Optic Connectors

 

Fiber Optic Attenuators

 

 

Fiber Optic Media Converters

Fiber Optic Enclosures

Fiber Optic Cables

Fiber Optic Test Equipment

Mode Conditioning Cables

Fan Out Cables

MPO Cassettes

 

 

Fiber Cables With Pulling Eye (Custom)

MTP Singemode 12 Fiber Ribbon

Bend Bright Fiber Assemblies

 

Fiber Optic Adapters

foa8mm01.gif (11826 bytes)

 

Fiber Optic Connectors

 

Fiber Optic Attenuators

 

 

Fiber Optic Media Converters

Fiber Optic Enclosures

Fiber Optic Cables

Fiber Optic Test Equipment

Mode Conditioning Cables

Fan Out Cables

MPO Cassettes

Fiber Optic Enclosures

OSP Closures

Fiber Optic Adapters

foa8mm01.gif (11826 bytes)

Fiber Optic Connectors

Fiber Optic Attenuators