CAT 3-CAT 3 LAN Cable Composite Cable

Our outdoor rated CAT 5e cable is available in 500 foot- 1000 foot reels as well as custom lengths- since the outdoor rated CAT 5e cable is based on the cost of oil-you need to call us at (866) 342-3721 to get the latest pricing. Generally the outdoor rated CAT 5e Cable costs from$ 150-$ 195 per 1000 foot reel. With custom lengths of the outdoor rated CAT 5e cable there is also a cut charge. We normally ship the same day if order is placed before 1pm PST.

CAT 5e- Cat 6- CAT 6 Cable Tutorial

So, when someone refers to 568A, are they talking about the standard, or the wiring scheme? The answer, is that it depends on the context. If they were to say "The entire office fully complies with 568A", obviously, they would be talking about the standard. If they were to say "The jacks and patch panels are all 568A", then they would be referring to the wiring scheme.

The 568 committee, with good intentions, decided to allow both wiring methods (568A & 568B) to exist within the 568A Standard. The reason was that at the time, a great deal of cabling plants had been installed to the B standard (formerly known as WECO or AT&T 258A). Even though they allowed both wiring methods, they stated in their standard that 568A wiring would be the preferred method for all new installations. Time, and popular opinion, went in the other direction. The most popular wiring method today is 568B. Having both A & B methods does nothing but cause errors and confusion. Originally, patch panels and jacks were manufactured either A or B. In most cases, they were not labeled as such. Most suppliers stocked only the B wired products. Luckily, today, almost all jacks and patch panels show diagrams for both A and B. The only difference between the two is the interchanging of the 2nd and 3rd pairs (white/orange and white/green, respectively).

So which method to choose? As we stated earlier; There is no difference, whatsoever, between the two wiring schemes, in connectivity or performance when connected form one modular device to another. The answer, is that it does not matter at all, unless you are terminating one end onto a punch block, in which case, the A method has an advantage. The main thing is that you choose one method, and stick with it. I recommend to all installers that they terminate one segment on both the jack and patch panel sides, and test for proper continuity. It has happened to many professionals, where they terminated the entire installation, and then discovered that the two ends were wired for different methods. Then they had to re-terminate all of the cables on one end completely to correct the situation.

The following charts should be very helpful in illustrating the difference between the A & B methods. For those who are not familiar with telephony, tip (T) refers to the positive (+) side, and ring (R) refers to the negative side of the circuit. The white/blue pair (the first pair in the cable) consists of two wires that are twisted together. They are the white/blue (tip) and the blue/white (ring). The white/blue wire is predominately white with a blue stripe. The blue/white is the inverse, predominately blue with a white stripe.

Category 5, 5 E, 6 and 7 Performance Specification Chart

Category 6 (CAT 6) technology is rapidly growing in the telecommunications industry’s commercial market. CAT 6 has been under development since late 1997. Originally, the wiring was intended to go from the 100 MHz capability of CAT 5 to 200 MHz, but later that was revised to 250 MHz. CAT 6 provides for other metrics as well, variables that become important at high bandwidth rates. These include crosstalk, or interference between wire pairs, and skew, the difference in timing of signals on the wires.

American Tech Supply Will Custom Cut Your OSP CAT 5e or CAT 6 Cable and Connectorize Your Outside Plant Cable- and SHIP IT THE SAME DAY! ( for an additional cost) Why Go CAT 6 Cable? Click

500 or 1000 Foot Spool Black Only Solid Cable Outdoor Rated Unshielded 4-pair unshielded twisted pair cable 24AWG stranded bare copper conductor Exceeds Cat5e specifications Rated to or above 350Mhz to provide additional performance and bandwidth Ideal for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX Verified compliant with EIA/TIA standards by UL UL/CSA listed

American Tech Supply carries thousands of types of cables from the below manufacturers for CAT 5e cable, CAT 5e Plenum, CAT 6 plenum, CAT 6 cable and Outdoor Rated CAT 5e Cable

Outdoor Rated CAT 5e and CAT 6 Patch Cords

OUTDOOR Rated CAT 5e CABLE & Patch Cords CAT 5e Outdoor Cable: Part # ATS 763108 CAT 5e Outdoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil Resistant Jacket Suitable for Burial - Unshielded with Unbonded Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper wire, enclosed in an outdoor rated, moisture and chemical resistant black polyethylene jacket. Flooding compound surrounds the twisted pairs, providing additional moisture protection. This cable is engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance criteria for 10/100/1000BaseT Ethernet applications-Extreme outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for extreme weather conditions. Can be ran exposed or buried.

ATS 763108 CAT 5e Outdoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil Resistant Jacket Suitable for Burial - Unshielded with Unbonded Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper wire, enclosed in an outdoor rated, moisture and chemical resistant black polyethylene jacket. Flooding compound surrounds the twisted pairs, providing additional moisture protection. This cable is engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance criteria for 10/100/1000BaseT Ethernet applications-Extreme outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for extreme weather conditions. Can be ran exposed or buried.

ATS 765108 CAT 6 Outdoor Cable-1000' Outdoor Rated CAT 6- Category 6-Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil Resistant Jacket Suitable for Burial - Unshielded with Unbonded Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper wire, enclosed in an outdoor rated, moisture and chemical resistant black polyethylene jacket. Flooding compound surrounds the twisted pairs, providing additional moisture protection. This cable is engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance criteria for 10/100/1000BaseT Ethernet applications-Extreme outdoor gel filled, UV rated, plenum, Cat 6e cable. Perfect for extreme weather conditions. Can be ran exposed or buried. THIS IS CATEGORY 6 -CAT 6 Outdoor cable.

Part # 765108 CAT 6 Outdoor Cable Spec's- Outdoor Cat 6 pdf

Our ATS 763108 CAT 5e Outoor Cable: ListPrice: $ 310/1000 feet, Our Price $ 189.99/1000 Feet- Discount Available!!Call (866) 342-3721

Our ATS 763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable is not the same as you can buy at 'retails stores that is rated as "indoor-outdoor'- this is the real mccoy and can be direct buried into the ground.

Order Part Number:

ATS 763108 CAT 5e Outoor Cable (Custom Lengths Available!- ATS will cut, and terminate your CAT 5e Outdoor Rated Cable- SAME DAY SHIPPINg available for additional cost.

ATS 763208 Aluminum Shielded Cable (Call For Minimum Order) -Aluminuml Shielded Cable (Call For Minimum rder)-1000FT OSP Broadband Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP cables are designed to provide extension of the LAN beyond the premises. AluminumShielded for protection against EMI/RFI. A variety of constructions are available to suit multiple environmental needs.

ATS 763308 Steel Shielded Cable (Call For Minimum Order)-1000FT OSP Broadband Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP cables are designed to provide extension of the LAN beyond the premises. Steel Shielded for protection against EMI/RFI. A variety of constructions are available to suit multiple environmental needs.The ultimate in OSP rated CAT 5e cable.

SPECIFICATIONS
ACR (Minimum)—Typical: 30.5 dB/100 m (328.1 ft.) at 100 MHz
Attenuation (Maximum)—22 dB/100 m (328.1 ft.) at 100 MHz
Conductor—24 AWG, solid, insulated copper
Insulation—HD-polyethylene;
Nominal diameter: Standard: 0.23", (0.58 cm); Armored: 0.34" (0.86 cm)
Jacket—UV-resistant, abrasion-resistant polyethylene
NEXT (Minimum)—Typical: 51.7 dB/100 m (328.1 ft.) at 100 MHz
PS-NEXT (Minimum)—Typical: 44.8 dB/100 m (328.1 ft.) at 100 MHz
Return Loss (Minimum)—Typical: 21.2 dB/100 m (328.1 ft.) at 100 Hz
Time Delay Skew (Maximum)—25 nanoseconds
Temperature— -94° to +167° F (-70° to +75° C)

American Tech Supply also offers wholesale priced CAT 5e Cable via "pallet purchasing" in 1000 foot reels for less than $40.00 per box. Plenum CAT 5e plenum at pallet pricing is from $ 70-$85.00 per 1000 foot reel.Please call for details at (866) 650-DATA.

Dielectric Cables Outdoor OSP Cables
Military Cables
Security Cables
Indoor- Outdoor Cables
Datacom/Central Office Cables

CAT 5e OUTDOOR RATED CABLE

Category 6 UTP (SuperCAT1000) plenum (805508), non-plenum (705508) and patch cables (705708) with 200 MHz bandwidth that deliver 2.4 GHz performance Equivalent TO BELDEN Media Twist Part Number 7852A at 40% Less!!

UltraPipe

UltraPipe Category 6e+ cables exceed all proposed Category 6 specifications and provides superior bandwidth performance up to 550Mhz to support broadband video and high-speed full-duplex transmission protocols. It defines a new level of performance with a 300% improvement in PowerSum Crosstalk and a 60% improvement in return loss over Category 6. UltraPipe's patented design includes the revolutionary Isolator pair separator, which resolves NEXT and ELFEXT issues required for accurate transmission using all four pairs.

6ECMP 4 pair non 3x1

6ECMR 4 pair non-plenum

6EJCM 4 pair patch cord

 

UltraMedia Cable

Engineered specifically for high-speed, full-duplex, parallel transmission protocols that dominate new technologies, UltraMedia's patented design, which includes the revolutionary Isolator pair separator, resolves ELFEXT and balance issues required for accurate transmission using all four pairs. Specified to 400Mhz, UltraMedia provides the performance margin against Category 6 requirements necessary for bandwidth intensive applications such as 3D imaging and Gigabit Ethernet.

7504 4 pair plenum

75N4 4 pair non-plenum


6NF4 4 pair outdoor

Media 6

The Commscope Media 6 meets all Category 6 specification to support broadband video and high speed, full-duplex transmission protocols that new technologies demand. Features include a flexible jacket, thousand to zero footage markers, vibrant colored pairs with a co-extruded color stripe for easy identification, and a smaller OD than typical Category 6 products

4 pair plenum

Residential Cabling Products

When it comes to residential cabling, look to CommScope to provide the solution. Our UltraHome® cables meet the needs of voice, data, and video applications in one easy-to-install product. The UltraHome family consists of coaxial cable, Category 5e unshielded twisted pair, and multimode fiber in single, Siamese, and bundled configurations designed for delivering true multimedia inside the home.

Recently, CommScope introduced their expanded Residential Cabling line. The Residential Cabling catalog contains 20 new coaxial, fiber, and UTP cables for residential voice, data, and video applications in single, Siamese, and bundled designs. CommScope's UltraHome® residential cabling products provide the foundation to support the capabilities of today's technology as well as those of the future.

 

DRAKA- Helix -Hi Temp Products

Category 6 UTP (SuperCAT1000) plenum (805508), non-plenum (705508) and patch cables (705708) with 200 MHz bandwidth that deliver 2.4 GHz performance

Enhanced Category 5e UTP (SuperCAT360) plenum (804508), non-plenum (704508) and patch cables (704708) tested to 360 MHz for extended Category 5e performance

Category 5e UTP (SuperCAT100E) plenum (803308), non-plenum (703408) and patch cables (701308) that meet all Category 5e performance criteria

Category 5e UTP for outdoor applications (All Weather SuperCAT) for direct buried, duct or aerial applications (763108) when Cat5e performance is needed to withstand weather or temperature extremes - aluminum armored (763208) and steel armored (763308) versions available

Category 5 (SuperCAT100) plenum (803508), non-plenum (703108) and patch cables (701008) delivering solid 100 MHz Category 5 performance - 25 pair versions are available in plenum (803150) and non-plenum (703150) constructions

Category 3 UTP - plenum (801308), non-plenum (702308) and patch cables (700708) available - 25 pair versions are available in plenum (801350) and non-plenum (702350) constructions - patch cables available in 2, 3 and 4 pair

 

Local Area Network Products - Category 5e+


5504M 4 pair plenum 3x1

5504 4 pair plenum 4x0

55N4R 4 pair non-plenum

5524M 8 pair plenum 3x1

5N54 8 pair non-plenum

5NF4 4 pair outdoor

OUTSIDE RATED CAT 5e CABLE

This all weather SuperCAT cable is an outdoor rated CAT 5e cable that can be installed directly in the ground, inside a duct or aerially lashed to a support member. The cable is fully flooded and has a tough UV and abrasion resistant black polyethlene jacket. The cable is designed to withstand temperatures as low as -70degrees C (Celsius) and as high as 75 degress C. Data transmission rates are up to 100Ms/second. This cable is the ideal solution for connecting LAN terminal locations outside the main building such as portable classrooms without the need to use expensive optical fiber systems.Optional aluminum or steel shielding systems provide addtional protection for EMI and damage caused by rodents.

Order Part Number:

ATS 763108 CAT 5e Outoor Cable (Custom Lengths Available!)

ATS 763208 Aluminum Shielded Cable (Call For Minimum Order)

ATS 763308 Steel Shielded Cable (Call For Minimum Order)