Product Categories

About Us

cable, vdsl, patch

 

Wireless Supplier - Eband Communications - 82-8602 - MWL-125-1201 E-Link 1000,1250 Mbps Link with Copper GBIC, RJ-45 Connector, 1 ft antenna - Wireless Backhaul- Wireless Solutions - National Wireless Rollouts-Bluetooth - Wi Fi - Wi Fi Solutions- Wireless Integration

 

National Wireless Supplier- Wireless Products-Welcome to American Tech Supply a national Wireless Supplier where we specialize in wireless equipment and national wireless rollouts for WISP's, CLEC's, Carriers, Municipalities, Hotels, Conference Centers, Dealers Contractors and national chains and franchises looking to offer wireless services to their customers and visitors. Our wireless solution range from wireless switching and transmission equipment to antennas, to outdoor cell site enclosures. We have wireless solutions for the local restaurant or Pizza chain to offer WIFI to customers on a lunch break with their laptops to offering substantial discount to national wireless rollouts to franchises and hotel chains. Our wireless solutions for major hotel chains range from lobby and pool WIFI services to entire campus solutions. For municipalities we offer large WIFI solutions to deliver wireless Internet access to shoppers to offering remote wireless carrier grade services to remote- Rural areas.

We carry the wireless equipment from many manufacturers- too many to list here so we ask if you do not see it listed here please call us at (866) 342-3721 and ask one of our national sales executives your wireless network questions.

 


The Highest Performance
Gigabit Wireless Solution in the World

 

   
  • Carrier class (99.999% availability)
  • Ultra high capacity
  • Long distances up to 10 miles / 16 km
  • Highest performance for lowest cost
  • Most robust GigE radio on the market
 

E-Band Communication's advanced chipset delivers a 3-times improvement in link budget over all competing millimeter-wave products, to deliver the highest performance gigabit radio in the world.

 
Overview

The E-Band millimeterwave communication systems provide carrier grade performance for gigabit throughputs achieving link distances over several miles. Our products address the requirements of carriers, enterprises, MSOs, government, and internet service providers building cost-efficient wireless gigabit IP networks. E-Band technology provides solutions for interconnection and backhaul of 3G and 4G (WiMAX & LTE) networks, Gigabit Ethernet access network connections such as LAN, fiber backup, path redundancy and network extension applications.

E-Link 1000 Point to Point System Overview
Features:
  • Full duplex wire speed Gigabit Ethernet
  • Typical link distances exceeds 1.0 Miles/2.0 Km for 99.99% availability
  • Low Latency for multimedia applications 
  • Interference free operation  
  • Rapid Licensing  
  • Simple installation and maintenance using PC or PDA 
  • Supports multiple network architectures including: 
    • Point-to-Point 
    • Mesh 
    • Star      
    • Ring

Applications:

  • WiMAX backhaul
  • Mobile backhaul
  • Local Area Network Extension
  • Remote Storage Access
  • Mesh Backhaul
  • Metropolitan Area Networks (MAN)
  • Redundant Access / Network Diversity
  • Disaster Recovery
  • Homeland Security

The Benefits of “Light Licensing” for E-Band Wireless Systems.

 

Copper Interface
Part No. Description
82-8602 MWL-125-1201 E-Link 1000,1250 Mbps Link with Copper GBIC, RJ-45 Connector, 1 ft antenna
82-8605 MWL-125-2201 E-Link 1000,1250 Mbps Link with Copper GBIC, RJ-45 Connector, 2 ft antenna
   
Extended Warranty and Advance Replacement Services
82-8614 E-Link-EXT1YR Add Next Business Day Replacement to Standard 1 Year Warranty
82-8615 E-Link-EXT2YR Extend E-Link product warranty to a second year with Next Business Day Replacement
82-8616 E-Link-EXT3YR Extend E-Link product warranty to a third year with Next Business Day Replacement
82-8617 E-Link-EXT4YR Extend E-Link product warranty to a fourth year with Next Business Day Replacement



 
Multimode Interface
Part No Description
82-8600 MWL-125-1111 E-Link 1000, 1250 Mbps Link equipped with 850 nm MM optical interface, 1 ft antenna
82-8603 MWL-125-2111 E-Link 1000, 1250 Mbps Link equipped with 850 nm MM optical interface, 2 ft antenna
   
Extended Warranty and Advance Replacement Services
82-8614 E-Link-EXT1YR Add Next Business Day Replacement to Standard 1 Year Warranty
82-8615 E-Link-EXT2YR Extend E-Link product warranty to a second year with Next Business Day Replacement
82-8616 E-Link-EXT3YR Extend E-Link product warranty to a third year with Next Business Day Replacement
82-8617 E-Link-EXT4YR Extend E-Link product warranty to a fourth year with Next Business Day Replacement


 
Singlemode Interface
Part No. Description
82-8601 MWL-125-1121 E-Link 1000, 1250 Mbps Link equipped with 1310 SM optical interface, 1 ft antenna
82-8604 MWL-125-2121 E-Link 1000, 1250 Mbps Link equipped with 1310 SM optical interface, 2 ft antenna
   
Extended Warranty and Advance Replacement Services
82-8614 E-Link-EXT1YR Add Next Business Day Replacement to Standard 1 Year Warranty
82-8615 E-Link-EXT2YR Extend E-Link product warranty to a second year with Next Business Day Replacement
82-8616 E-Link-EXT3YR Extend E-Link product warranty to a third year with Next Business Day Replacement
82-8617 E-Link-EXT4YR Extend E-Link product warranty to a fourth year with Next Business Day Replacement


 
E-band Accessories
Part No. Description
82-6569 Outdoor Cat. 5e Lightning Suppressor, GigE
82-4886 Indoor Cat. 5e Lightning Suppressor, GigE
82-6536-6 N-Male to N-male Cable for connecting Power Injector to ODU unit, LMR-200, 6ft. length

 

 
94-2530 18GA. Bulk Outdoor Power Cable, Shielded, UV Resistant, Buriable (no armor)
94-2158 24GA Bulk Cat 5E - 4 Pr Solid, Outdoor Rated
18-2249 48VDC Indoor Backup Power Supply with 120VAC power cord.

 

 

 

82-8690 PI-1 Indoor 48VDC Coax-N Power Injector

• Injects 48VDC into an N-Female connector
• Use for testing and set-up of equipment
• Includes surge/reverse polarity protection
• Includes Power OK LED indicator
• Requires external power supply
• Use PN 82-6536-xx N-Male to Male cable to connect between PI-1 and ODU
 

82-8691-6 Kit of PI-1 Indoor 48VDC Coax-N Power Injector with attached 120VAC Power Supply & 6ft cord. 

• Kit of 120VAC/48VDC Power Supply and PI-1 Coax-N Power Injector
• Use for testing and set-up of equipment
• Injects 48VDC into an N-Female connector
• Includes surge/reverse polarity protection
• Includes Power OK LED indicator
• Optional 12ft power cord available (PN 94-3077-12)
• Use PN 82-6536-xx N-Male to Male cable to connect between PI-1 and ODU

 

82-8693 PI-2 Outdoor 48VDC Coax-N Power Injector (requires external power supply) 
 
• Injects 48VDC into an N-Female connector
• Interfaces to 18ga. 48VDC power wire near the ODU
• Includes surge/reverse polarity protection
• Includes Power OK LED indicator
• Includes pole mount bracket kit for up to 4-1/2" Mast
• Use PN 82-6536-xx N-Male to Male cable to connect between PI-2 and ODU

82-8694 PP-1 Outdoor 48VDC Power Protector
 
• Protects the 48VDC line at base of tower or near building entry point
• Interfaces to 18ga. 48VDC power in and out near building entry point
• Includes surge/reverse polarity protection
• Includes Power OK LED indicator
• Includes pole mount bracket kit for up to 4-1/2" Mast
• Use PN 82-25306 18ga. bulk power cable to connect to power source and injector

82-8685-12 PS-1 48V Indoor Power Supply with locking metal cabinet. Includes 12ft 120VAC power cord, wall mount.
 
Fiber Accessories
82-8695 FTB-1M 4-Pos. Outdoor LC MM Fiber Termination Box; Includes 4-Pos. LC Multimode fiber coupler; may be expanded to 8-position with PN 71-8391.  Includes pole mount bracket kit with clamps for up to 4-1/2" OD masts. 
 
• Provides protection for primary 4-fiber junction to fiber jumper cable (to ODU)
• Typically mounted within 8ft or 30ft (if optional 71-9680-30 jumper is use) of ODU
• Maintains a stable platform for primary 4-fiber cable
• Speeds testing of fiber interface by allowing substitution of fiber jumper
• Eliminates need for emergency fiber fusion or on-tower fiber connector installation
• Reduces potential down time by providing quick access to additional fibers
• Select -1M for Multimode or -1S for Singlemode fiber applications
• May be expanded to 8-positions with PN 71-8391 (MM) / 71-8392 (SM)
• Includes pole mount bracket kit for up to 4-1/2" Mast
• Use PN 71-9664-xx Pre-terminated 4-Fiber LC Outdoor Multimode Cable
• Use PN 71-9680-10 or 71-9680-30 spare multimode fiber jumper

 

82-8696 FTB-1S 4-Pos. Outdoor LC SM Fiber Termination Box; Includes 4-Pos.LC Singlemode fiber coupler; may be expanded to 8-position with PN 71-8392.  Includes pole mount bracket kit with clamps for up to 4-1/2" OD masts. 
 
• Provides protection for primary 4-fiber junction to fiber jumper cable (to ODU)
• Typically mounted within 8ft or 30ft (if optional 71-9680-30 jumper is use) of ODU
• Maintains a stable platform for primary 4-fiber cable
• Speeds testing of fiber interface by allowing substitution of fiber jumper
• Eliminates need for emergency fiber fusion or on-tower fiber connector installation
• Reduces potential down time by providing quick access to additional fibers
• Select -1M for Multimode or -1S for Singlemode fiber applications
• May be expanded to 8-positions with PN 71-8391 (MM) / 71-8392 (SM)
• Includes pole mount bracket kit for up to 4-1/2" Mast
• Use PN 71-9664-xx Pre-terminated 4-Fiber LC Outdoor Multimode Cable
• Use PN 71-9680-10 or 71-9680-30 spare multimode fiber jumper
• Pictured above

82-8697 FTPI-1M 4-Position LC MM Fiber Termination Box with built-in Coax-N Power Injector.  Includes 4-Position LC Multimode fiber coupler; may be expanded to 8-pos with PN 71-8391  Includes surge/reverse polarity protection and Power OK indicator.  Includes pole mount bracket kit with clamps for up to 4-1/2" OD masts. 
 
• Combines all features of the FTB-1x Fiber Termination Box with the Power Injector
• Provides protection for primary 4-fiber junction to fiber jumper cable (to ODU)
• Typically mounted within 8ft or 30ft (if optional 71-9680-30 jumper is use) of ODU
• Maintains a stable platform for primary 4-fiber cable
• Speeds testing of fiber interface by allowing substitution of fiber jumper
• Eliminates need for emergency fiber fusion or on-tower fiber connector installation
• Reduces potential down time by providing quick access to additional fibers
• Select -1M for Multimode or -1S for Singlemode fiber applications
• May be expanded to 8-positions with PN 71-8391 (MM) / 71-8392 (SM)
• Use PN 71-9664-xx Pre-terminated 4-Fiber LC Outdoor Multimode Cable
• Injects 48VDC into an N-Female connector
• Interfaces to 18ga. 48VDC power wire near the ODU
• Includes surge/reverse polarity protection
• Includes Power OK LED indicator
• Includes pole mount bracket kit for up to 4-1/2" Mast
• Use PN 82-6536-xx N-Male to Male cable to connect between PI-2 and ODU
• Use PN 71-9664-xx Pre-terminated 4-Fiber LC Outdoor Multimode Cable
• Use PN 71-9680-10 or 71-9680-30 spare multimode fiber jumper
 

82-8698 FTPI-1S 4-Position LC SM Fiber Termination Box with built-in Coax-N Power Injector.  Includes 4-Position LC Singlemode fiber coupler; may be expanded to 8-pos with PN 71-8392.  Includes surge/reverse polarity protection and Power OK indicator.  Includes pole mount bracket kit with clamps for up to 4-1/2" OD masts. 
 

 
• Combines all features of the FTB-1x Fiber Termination Box with the Power Injector
• Provides protection for primary 4-fiber junction to fiber jumper cable (to ODU)
• Typically mounted within 8ft or 30ft (if optional 71-9680-30 jumper is use) of ODU
• Maintains a stable platform for primary 4-fiber cable
• Speeds testing of fiber interface by allowing substitution of fiber jumper
• Eliminates need for emergency fiber fusion or on-tower fiber connector installation
• Reduces potential down time by providing quick access to additional fibers
• Select -1M for Multimode or -1S for Singlemode fiber applications
• May be expanded to 8-positions with PN 71-8391 (MM) / 71-8392 (SM)
• Use PN 71-9664-xx Pre-terminated 4-Fiber LC Outdoor Multimode Cable
• Injects 48VDC into an N-Female connector
• Interfaces to 18ga. 48VDC power wire near the ODU
• Includes surge/reverse polarity protection
• Includes Power OK LED indicator
• Includes pole mount bracket kit for up to 4-1/2" Mast
• Use PN 82-6536-xx N-Male to Male cable to connect between PI-2 and ODU
• Use PN 71-9664-xx Pre-terminated 4-Fiber LC Outdoor Multimode Cable
• Use PN 71-9680-10 or 71-9680-30 spare multimode fiber jumper
• Pictured above
 

 
Multimode Fiber Accessories
82-8695 FTB-1M 4-Pos. Outdoor LC MM Fiber Termination Box; Includes 4-Pos. LC Multimode fiber coupler
82-8697 FTPI-1M 4-Position Outdoor LC MM Fiber Termination Box with built-in Coax-N Power Injector
71-9664-xx Pre-Terminated 4-Fiber LC Multimode Cable; suitable for direct burial (no armor)
OFNR rated /Sunlight Resistant; Operating Temperature: -40° to +185° (-xx length in feet)
 
71-9680-10 Multimode Fiber LC Jumper Cable, LC to LC w/Weatherproof Grommet, 10' (for Termination Box)
71-9680-30 Multimode Fiber LC Jumper Cable, LC to LC w/Weatherproof Grommet, 30' (for Termination Box)
71-8391 Spare 4-Position LC Multimode Fiber Coupler, 4xLC Female to 4xLC Female


 
Singlemode Fiber Accessories
82-8696 FTB-1S 4-Pos. Outdoor LC SM Fiber Termination Box; Includes 4-Pos.LC Singlemode fiber coupler
82-8698 FTPI-1S 4-Position Outdoor LC SM Fiber Termination Box with built-in Coax-N Power Injector
71-9690-XX Pre-Terminated 4-Fiber LC Singlemode Cable; suitable for direct burial (no armor)
OFNR rated /Sunlight Resistant; Operating Temperature: -40° to +185° (-xx length in feet)
 
71-9681-10 Singlemode Fiber LC Jumper Cable, LC to LC w/Weatherproof Grommet, 10' (for Termination Box)
71-9631-30 Singlemode Fiber LC Jumper Cable, LC to LC w/Weatherproof Grommet, 30' (for Termination Box)
71-8392 Fiber Optic Coupler, LC to LC, Singlemode Quad (FEM to FEM)

 

 

Home | Cables | Switches | Contact Us | Our Team | Locations

 

 

 

 

 

 

 

 

 

 

 

BIF-Bend Insensitive Fiber

New Bend Insensitive Fiber Jumpers