MaxCell® Premise – Made In USA innerduct/Made in American Fabric Innerduct


*Please note there may be minimums requirements for all types of innerduct
MaxCell® Premise is a suitable solution for various in-building enterprise applications, data centers, and confined space constructions. It effectively addresses the challenge of limited space and high cable density by enabling easy installation of new cables without the requirement of rigid conduit. Additionally, for shorter cable runs, the cables can be manually pulled into position, resulting in time and cost savings.

Call for Price

This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.

Compare

 

 

MaxCell® Premise meets all of the specifications needed for in-building enterprise applications, data centers, or confined space builds. Where the cable pathway is overly dense and space is at a premium, MaxCell Premise will allow new cables to be installed easily, eliminating the need for rigid conduit. In cases of short runs, cables can often be pulled into place by hand, saving time and expense.

FEATURES & ADVANTAGES
  • Manufactured in the U.S.
  • UL 2024 – OFCR FT-6 Listed. For Plenum and Riser applications in cable routing assemblies and communication raceways.
  • Low Smoke Zero Halogen Compliant
  • Halogen-Free
  • Color differentiated pull tapes are pre-installed within each cell
  • Designed for use in ducts ranging from 1.25″ – 4″ (I.D.)
  • Configured in 1 to 3-Cell Packs
PRODUCT #
DESCRIPTION
MXP4003BK####
4” 3 Cell Plenum, Black Thread
MXP3456BK####
3” 3 Cell Plenum, Black Thread
MXP2003BK####
2” 3 Cell Plenum, Black Thread
MXP2002BK####
2” 2 Cell Plenum, Black Thread
MXP2001BK####
2” 1 Cell Plenum, Black Thread
MXPM3303BK####
1.25” 3 Cell Plenum, Black Thread
MXPM3302BK####
1.25” 2 Cell Plenum, Black Thread
MXPM3301BK####
1.25” 1 Cell Plenum, Black Thread

Self-Supporting ————————————————————————————————————————————————-

PRODUCT #
DESCRIPTION
MXP43SSBK
3 Cell Self Supporting, 1.75” (45mm) Capacity Per Pathway, Black Thread

* Design and fabrication of MaxCell is patent protected.

Packaging ——————————————————————————————————————————————————-

 

MATERIAL OF CONSTRUCTION EXACT DIMENSIONS

PACKAGE TYPE

Flange Core EMPTY REEL WT. MAXIMUM REEL CAPACITY Height A Width B Core C
Plastic Reel Plastic Plastic 4 lbs 500′ 22″ 19″ 6″
33″ x 15″ Wood Reel 3/4″ Plywood Fiberboard 24 lbs 1000′ 33″ 15″ 8″
33″ x 22″ Wood Reel 3/4″ Plywood Fiberboard 26 lbs 1500′ 33″ 22″ 8″

All dimensions are approximate, are intended to be used for reference purposes and are subject to change. Prior to shipping, all reels are wrapped with a UV protective film. Designers should make every effort to conform to industry standards with regard to distances between any two pull points (generally 600 to 1,000 feet), number of bends (maximum of two 90 degree bends or a total of 180 degrees) between any two pull points, and proofing of conduit pathway using appropriately sized mandrels (normally ¼ to ½ inch less than the inside diameter of the conduit).

 

Brand

MaxCell

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)