MaxCell® Edge Detectable fabric innerduct 46mm/1 Cell [MXED52221] – Made In USA innerduct/Made in American Fabric Innerduct


*Please note there may be minimums requirements for all types of innerduct
MaxCell® Edge Detectable fabric innerduct maximizes conduit capacity while allowing space for future network deployments. It creates additional pathways for outside plant applications, including long lines, bridge crossings, and curb-to-building entrances.

Call for Price

This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.

Compare

Shop All MaxCell Products

 

 

MaxCell® Edge Detectable fabric innerduct is designed to maximize the capacity of conduits in network infrastructure while preserving space for future network deployments. MaxCell Edge Detectable is designed to create additional pathways in greenfield or occupied conduit specifically for outside plant applications, including long lines; under bridges; road, river and rail borings under streets; and, curb to building entrances.

  • Sewn-in 18AWG TFN solid copper wire suitable for direct wired toning equipment and above ground handheld locators
  • Solves cabling issues for conduits, allowing a range of cable sizes
  • Enables overlay of cables in occupied conduits
  • Reduces or eliminates number of conduits required in new construction
  • Melting point of 419°F (215°C) (almost twice that of HDPE)
  • Halogen-free
  • Resistant to ground chemicals and petroleum products
  • Constructed of PET (Polyethylene Terephthalate) and Nylon 6
  • Patented fabric design may reduce pulling tension by up to 20% over previous MaxCell versions
  • Features color coded, pre-installed 1250LB pull tape in each cell* for 3″ and 4″ MaxCell. 1.25″, 1.75″ and 2″ MaxCell have pre-installed 1250LB VisT Glide Rope in each cell.
  • Pre-lubed for lower friction during MaxCell and cable installation**
  • Manufactured in the U.S.A.

Design and fabrication of MaxCell is patent protected.
* Higher tensile strength pull tape and rope options are available for difficult cable installations.
** Additional lubrication is recommended to further decrease friction during cable installation.

Product Information ——————————————————————————————————————————————

1INCH

PRODUCT #
MIN CONDUIT ID
CELLS
REPLACES
MAX CABLE DIAMETER PER CELL
MXED32121
1.25″
1 Cell
MXDM3301
.45” (12mm)
MXED32122
1.25″
2 Cell
MXDM3302
.45” (12mm)
MXED32123
1.25″
3 Cell
MXDM3303
.45” (12mm)
MXED44181
1.75″
1 Cell
N/A
.70” (18mm)
MXED44182
1.75″
2 Cell
N/A
.70” (18mm)
MXED44183
1.75″
3 Cell
N/A
.70” (18mm)
MXED44184
1.75″
4 Cell
N/A
.70” (18mm)

MAXCELL EDGE DETECTABLE 1.25 INCHES SPEC SHEETS

MAXCELL EDGE DETECTABLE 1.75 INCHES SPEC SHEETS

—————————————————————————————————————————————————————-

2 INC

PRODUCT #
MIN CONDUIT ID
CELLS
REPLACES
MAX CABLE DIAMETER PER CELL
MXED52221
2.00″
1 Cell
MXD2001
.85” (22mm)
MXED52222
2.00″
2 Cell
MXD2002
.85” (22mm)
MXED52223
2.00″
3 Cell
MXD2003
.85” (22mm)
MXED52224
2.00″
4 Cell
N/A
.85” (22mm)

MAXCELL EDGE DETECTABLE 2 INCHES SPEC SHEET

—————————————————————————————————————————————————————-

3 INCH

PRODUCT #
MIN CONDUIT ID
CELLS
REPLACES
MAX CABLE DIAMETER PER CELL
MXED64283
3.00″
3 Cell
MXD3456
.1.05” (28mm)

MAXCELL EDGE DETECTABLE 3 INCHES SPEC SHEET

—————————————————————————————————————————————————————-

4 INCH

PRODUCT #
MIN CONDUIT ID
CELLS
REPLACES
MAX CABLE DIAMETER PER CELL
MXED86383
4.00″
3 Cell
MXD4003
.85” (22mm)

MAXCELL EDGE DETECTABLE 4 INCHES SPEC SHEET

Maximum pull length is dependent on conduit conditions. MaxCell Edge, MaxCell ISP (Plenum/Riser), and Detectable are available in multiple sizes and configurations. Contact customer service for more information on your specific application.

 

SKU: MXED52221 Category:

Brand

MaxCell

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)