(Part Number: NTCPSJ000329) – 1-1/4″ Break-Away D.Drill Swivel 1200 lb – Cable Pulling – Swivels – Breakaway Swivels – Condux International

Avoid overstressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between reamer and pulling eye. No need to use “weak link” pipe sections or wire when using a Condux Break-Away Swivel.

Theses swivels are available to accommodate various pulling needs. Break loads range from 1,200 lbs. – 25,000 lbs. and separate at ±10% of their rated break load. Order replacement pins as needed.

NOTE: D. Drill Swivels come with a 90 day limited warranty.

WARNING: These swivels are to be used for directional drilling only. Severe personal injury could result if used with rope or steel winch lines in cable pulling applications.

Break Load [lb]:
1,200

Break Load [Newton]:
5338

Compatible Swivel Grease:
08190007, Directional Drilling Grease

Diameter [in]:
1.25

Diameter [mm]:
32

Entire Slot Depth [in]:
1.34

Entire Slot Depth [mm]:
34

Height [in]:
10

Length [in]:
10

Width [in]:
10

Item #:
08021500

Item Name:
1-1/4 Break-Away D.Drill Swivel 1200 lb

Length [in]:
5.44

Length [mm]:
138

Obsolete Part Number:
CDX08021500

Package Type:
Each

Pin Center [in]:
.59

Pin Center [mm]:
15

Pin Diameter [in]:
.37

Pin Diameter [mm]:
9

Replacement Break Pin:
08021215

Replacement Part:
08081042, 1-1/4 Clevis Pin for 808 Champion Swivel & 400 D.Drill Swivel

Shipping Method:
Parcel

Slot Width [in]:
.56

Slot Width [mm]:
14

Type of Packages:
275

Unit of Measure:
EA.

Units Per Package:
1

Weight [lb]:
2.000000