(Part Number: NIHAEA000125) – No-Wrench Screw Anchor (4″ Helix – ¾” x 54″ Shaft) – Aerial Materials –

No-Wrench Screw Anchors may be installed by hand or machine. The forged Triple Eye on the rod has a large opening to admit a turning bar for screwing the anchor down. The eye will also fit into an adapter available from most hole-boring machine manufacturers so the anchor may be power-installed. The entire anchor is hot-dip galvanized for long resistance to rust. Hot Dip Galvanized per ASTM A123.

No-Wrench Screw Anchors can be installed to a greater depth to reach a firmer soil by using an extension rod.

Note: If hand installed, holding capacity may be reduced by as much as 10% to 20%. Capacity ratings apply to properly installed anchors only. Failure to install within 5 degrees of alignment with the guy load will significantly lower strength.

ASTM Specification:
A123

Cable Diameter Range [in]:
0.157-1.125

Cable Diameter Range [mm]:
4.0-28.6

Coating:
Hot Dip Galvanized

Height [in]:
10

Length [in]:
10

Packaging Type:
Boxes

Width [in]:
10

Guy Attachments:
3

Helix Diameter [in]:
4

Helix Diameter [mm]:
102

Holding Strength Class 5 [lb]:
4000

Holding Strength Class 6 [lb]:
3000

Holding Strength Class 7 [lb]:
1500

Item #:
BOLTANCH4X54

Item Name:
4 inch Helix, 3/4×54 inch Shaft

Length [in]:
54

Length [mm]:
1372

Maximum Lash Bundle Diameter [in]:
1.75

Package Type:
Each

Pallet Quantity:
100

Rod Diameter [in]:
0.75

Rod Diameter [mm]:
19

Shipping Height [in]:
6

Shipping Length [in]:
56

Shipping Method:
Parcel

Shipping Width [in]:
6

Similar to:
Hubbell Chance 43451, Allied Bolt 6044

Torque Load Limit [lb]:
400

Unit of Measure:
EA.

Units Per Package:
1

Weight [lb]:
14.000000

Weight [kg]:
3.67

Weight [lb]:
8.1