Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 600 pounds (2,670 N) +/- 10% (60 lbs. or 267 N). If the preset load is reached, the capstan will “slip” and discontinue rotating.
High strength alluminum and steel construction ensures product durability and cable protection.
The capstan is factory calibrated to 600 lbs (2,670 N), but can be calibrated to different loads from 200 to 1,000 lbs. (890 to 4,448 N).
The capstan is designed for use with a 2-7/16″ (62mm) diameter, AT&T specification bayonet style power take-off (PTO) shaft.
Active From:
2017-01-30 14:14:38
Diameter [in]:
42
Diameter [mm]:
1067
Flat Width [in]:
8
Flat Width [mm]:
203
Height [in]:
10
Length [in]:
10
Width [in]:
10
Item #:
08760040-06
Item Name:
42 Slip Clutch Torque Limited Cable Pulling Capstan
Maximum Cable Diameter [in]:
1.05
Maximum Cable Diameter [mm]:
26.7
Package Type:
Each
Pull Strength Kilo[Newton]:
2.8
Pull Strength [lb]:
600
Shaft [in]:
2-7/16 Bayonet Style
Shaft [mm]:
61.9 Bayonet Style
Shipping Method:
LTL
Similar to:
GMP 70473
Torque Load Limit [lb]:
600
Torque Load Limit [Newton]:
2670
Unit of Measure:
EA.
Units Per Package:
1
Weight [lb]:
192.000000
Width [in]:
31