Shop By Brand
Rack Mounting Solutions, Rack Accessories, Rack Shelves, Hammond
Sliding Keyboard Shelf RAKS Series – (RAKS19BK1)
Availability:
63 in stock
Features
- Designed to fit all standard 17 inch wide keyboards.
- Shelf slides for keyboard storage when not in use.
- Requires two (2) pairs of mounting rails.
- The suggested load capacity of 129 lbs (59 kg).
- Slides are tested to BIFMA Standards with load capacity @ 12 times/minute for 55000 cycles minimum.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Note: Keyboard not included.
$88.80
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
Sliding Keyboard Shelf RAKS Series
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
| Part No. | Overall Dimensions | Rack | Shelf | Shelf | Mounting | ||
|---|---|---|---|---|---|---|---|
| Height | Width | Depth | Units | Depth | Travel | Width | |
| RAKS19BK1 | 2.69 | 18.90 | 15.00 | 2U | 16.00 | 16.00 | 19.00 |
| RAKS24BK1 | 2.69 | 23.90 | 15.00 | 2U | 16.00 | 16.00 | 24.00 |
Related products
-
Rack Mounting Solutions, Rack Accessories, Archive, Hammond
10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-25)
Rack Mounting Solutions, Rack Accessories, Archive, Hammond10-32 Square Hole Cage Nuts 1421CNA Series – (CAGKIT1032-25)
Features
- 10-32 cage nuts for 0.375″/9.54mm square hole punched panel rails.
- Has the holding strength of a 10-32 nut.
- Heat-treated by means of austempering.
- Zinc plated.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
SKU: CAGKIT1032-25 -
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, Hammond
Mounting Screw and Cup Washer Combo-Pack 1421 Series – (1421100)
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, HammondMounting Screw and Cup Washer Combo-Pack 1421 Series – (1421100)
The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.
SKU: 1421100 -
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, Hammond
10-32 Rack Screw 1421D Series – (1421D)
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, Hammond10-32 Rack Screw 1421D Series – (1421D)
Features
- Slotted & phillips combination pan head screws
- Use where economy is important OR for close spacing.
- Example: multiple 1.75″ (1U) panels are mounted next to each other (as cup washers will interfere with each other)
- Zinc plated
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Qty Included Screw Length 1421D 25 screws 0.50 1421D100 100 screws 0.50 1421D500 500 screws 0.50 SKU: 1421D -
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, Hammond
10-32 Rack Rail Clip Nuts 1421N Series – (CLPKIT1032-25)
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, Hammond10-32 Rack Rail Clip Nuts 1421N Series – (CLPKIT1032-25)
Clip Nuts are a great alternative to Cage Nuts and have many more uses. Whether your rack has non-threaded round holes or square, clip nuts are an easier solution to speed up your installation.
Features
- 10-32 clip nuts for non-threaded rack rails.
- Heat-treated by means of austemper.
- Available in black or plated steel finish.
- Ships in clam shell or resealable jar, depending on quantity.
Specifications
- Constructed of SAE 1050-1065 spring steel.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- For use with 0.069-0.079″ panel thickness.
- Hardness: HRC 38-42.
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
- 1421NP are zinc plated CR3.
SKU: CLPKIT1032-25
