Shop By Brand
Couplers, InnerDuct Accessories, InnerDuct
Split-Lock + Coupler 2.00″ SDR – DuraLine
*Please note there may be minimums requirements for all types of innerduct
The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.
Call for Price
Compare
The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.
FEATURES
- No special tools required
- Reusable – can install with cable inside
- Heat- and UV-stabilized
- Fungus- and chemical-resistant
- Air-tight and water-tight
- No I.D. reduction
- Not recommended for plow chute
- Meets UL 514B pullout requirements
- ETL listed to UL STD 514B and CSA STD C22.2 18.3
- Made in the USA
| Weight | 6 lbs |
|---|
Related products
-
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler HYB 1.590″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000121 -
InnerDuct Accessories, Couplers, InnerDuct
1.00″ Clear-Lock PinPoint Splice Kit Couplers – DuraLine
*Please note there may be minimums requirements for all types of innerduct
The Clear-Lock Couplers and PinPoint Splices in one simple package. All the advantages of the Clear-Lock couplers with water-tight connectors for the PinPoint locatable duct in one simple kit. A 2.50″ kit is also available with our new Redi-Lock coupler.SKU: 20005752 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 10000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000043 -
InnerDuct Accessories, Couplers, InnerDuct
2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
InnerDuct Accessories, Couplers, InnerDuct2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000264
