Shop By Brand
InnerDuct Accessories, Couplers, InnerDuct
2 1/2″ Compression Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull out resistance.
Call for Price
Compare
Used to join and seal length of HDPE and PVC Duct. The internal double compression seal is created as the end caps are tightened. NOTE: PVC compression couplers are not recommended for high-pressure air or gas lines, or applications requiring high pull out resistance.
FEATURES
- Water-tight connection
- Assorted sizes
- No special tool required
- Used to join HDPE and PVC
- Not recommended for cable blowing or plow chute applications
- Limited pull out strength
| Weight | 2.20 lbs |
|---|
Related products
-
InnerDuct Accessories, Couplers, InnerDuct
1.00″ Shur-Lock II Coupler SDR 1.315 – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000118 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 10000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000043 -
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuct
NEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuctNEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-11 -
InnerDuct Accessories, Couplers, InnerDuct
3.00″ Shur-Lock II Coupler SDR 3.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000173
