Shop By Brand
Conduit, Specialty Conduit, UL Flex Duct, InnerDuct
UL Flex Duct 1 1/4” – Dura-Line Conduit Duct Pipe Outdoor Duct Outdoor Conduit
*Please note there may be minimums requirements for all types of innerduct
UL Flex Duct is a flexible PVC duct that eliminates the need for special preformed bends. Sizes 1/2″ – 4″ are UL listed, UV resistant, and offer excellent cable protection from ground line to meter/service box
Call for Price
Compare
UL Flex Duct is a flexible PVC duct that eliminates the need for special preformed bends. Sizes 1/2″ – 4″ are UL listed, UV resistant, and offer excellent cable protection from ground line to meter/service box
FEATURES
- Non-metallic, liquid-tight flexible conduit
- UL listed for sizes 1/2″ – 4″ (1660, Type B)
- Sunlight (UV) resistant
- Flexible PVC: eliminates the need for special preformed bends
- Excellent cable protection from ground line to meter/service box
- Used for cable protection and above and below ground installation applications
- UL listed for use in continuous temperatures from 105°C (221°F) Dry, 60°C (140°F) Wet, or 80°C (176°F) Dry, 60°C (140°F) Wet, 70°C (158°F) oil resistant or less.
- Use fittings identified for Type B conduit or liquid-tight flexible metal conduit. FNMC-B is directly marked on non-metallic fittings that are intended for integral conduit.
| Weight | 20 lbs |
|---|---|
| Dimensions | 50 ft |
Related products
-
InnerDuct Accessories, Couplers, InnerDuct
3.00″ Shur-Lock II Coupler SDR 3.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000173 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 10000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000043 -
InnerDuct Accessories, Couplers, InnerDuct
2.50″ Shur-Lock II Coupler SDR 2.875″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000172 -
InnerDuct Accessories, Couplers, InnerDuct
2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
InnerDuct Accessories, Couplers, InnerDuct2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000264
