Shop By Brand
InnerDuct
MaxCell® Edge Fabric Innerduct – Made In USA innerduct/Made in American Fabric Innerduct
*Please note there may be minimums requirements for all types of innerduct
MaxCell® Edge fabric innerduct is a specialized solution that enhances conduit capacity in network infrastructure while allowing room for future network expansions. Compared to rigid ducts, it has enabled the installation of significantly more cabling per conduit, with some instances reporting up to a 300% increase. In occupied conduits, MaxCell’s design facilitates the creation of new pathways, whether it involves bypassing existing cabling or traditional innerduct. This feature not only simplifies the process but also helps to reduce overall system costs.
Call for Price
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
MaxCell® Edge fabric innerduct is designed to maximize the capacity of conduits in network infrastructure while preserving space for future network deployments. New construction applications have yielded installation of up to 300% more cabling per conduit over rigid ducts. In occupied conduits, MaxCell’s design has allowed for easy pathway creation when overriding existing cabling or traditional innerduct while reducing total system cost.
- Solves cabling issues for conduits, allowing a range of cable sizes
- Enables overlay of cables in occupied conduits
- Reduces or eliminates number of conduits required in new construction
- Melting point of 419°F (215°C) (almost twice that of HDPE)
- Halogen-free
- Resistant to ground chemicals and petroleum products
- Constructed of PET (Polyethylene Terephthalate) and Nylon 6
- Patented fabric design may reduce pulling tension by up to 20% over previous MaxCell versions
- Features color coded, pre-installed 1250LB pull tape in each cell* for 3″ and 4″ MaxCell. 1.25″, 1.75″ and 2″ MaxCell have pre-installed 1250LB VisT Glide Rope in each cell. 1.10″ MaxCell has pre-installed 600LB VisT Glide Rope in each cell.
- Pre-lubed for lower friction during MaxCell and cable installation**
- Manufactured in the U.S.A.
For quote please call: 866-650-DATA(3282) or email: sales@americanteledatastore.com
Product Information ——————————————————————————————————————————————
1INCH
|
MAXCELL EDGE 1.10 INCHES SPEC SHEETS
MAXCELL EDGE 1.25 INCHES SPEC SHEETS
MAXCELL EDGE 1.5 INCH SPEC SHEETS
MAXCELL EDGE 1.75 INCHES SPEC SHEETS
—————————————————————————————————————————————————————-
2 INCH
|
MAXCELL EDGE 2 INCHES SPEC SHEET
—————————————————————————————————————————————————————-
3 INCH
|
MAXCELL EDGE 3 INCHES 3- CELL SPEC SHEETS
MAXCELL EDGE 3 INCHES 4 – CELL SPEC SHEETS
—————————————————————————————————————————————————————-
4 INCH
|
Brand
MaxCell
Related products
-
Standard HDPE, NEMA TC7, Conduit, DuraLine, InnerDuct
NEMA TC7 Standard HDPE – 1/2” EPEC 11 – Dura-Line Conduit/InnerDuct
Standard HDPE, NEMA TC7, Conduit, DuraLine, InnerDuctNEMA TC7 Standard HDPE – 1/2” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1/2-EPEC-11 -
InnerDuct Accessories, Couplers, InnerDuct
1.50″ Shur-Lock II Coupler SDR 1.900″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000122 -
InnerDuct Accessories, Couplers, InnerDuct
3.00″ Shur-Lock II Coupler SDR 3.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000173 -
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler SDR 1.660″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000120
