|
Fiber Optic Telephone
Extenders
American
Tech Supply carries a complete line of fiber optic telephone extenders
ranging from simple "quick talk" extenders to multi-line
(24 channel) PBX line extenders allowing you to use existing fiber
optic cable to run your voice needs over 2 fiber strands or install
fiber optic cable one time and use fiber optics for security proof
voice, data, IP, video services on one media- fiber.
Our
fiber optic modems are available from several different manufacturers
including TC Comm, Opterna, Omnitron, Allied Telesyn, Opticomm,
and others. Our Fiber Optic Transmission products are ideal for
Data, Voice, Ethernet, T1/E1, T3/E3 & Audio for campus &
intra-building fiber optic networks.
Additional
Fiber Optic Extenders- Allows Voice-Data-IP-Video -extend
Voice PBX Service Via Fiber Optic Cable
|
Fiber Optic Telephone Extenders-Fiber
Optic Modems-T1/E1
Fiber Optic Modems- T3/ E3 Fiber Optic Modems- Async/Sync Fiber
Optic Modems- Fiber Optic Transceivers- Fiber Optic Multiplexers-
Ethernet Media Converters- Telephone Extenders-Fiber Optic Media
Converters
CALL
American Tech Supply Today at (866) FIBER-21
|
Quick Talk RS-232 TC-1900
Fiber Telephone Extender- Prices Start at $995 each
.jpg)
|
Quick
Talk TC-1900 Fiber Optic Telephone Extender
Telephone fiber modem, telephone fiber
converter, telephone to fiber multiplexer, telephone fiber mux,
analog phone to fiber, POTS, 2-wire
"Quick-Talk" RS-232 or Fiber
Telephone Extenders
(Model TC1900/TC1901*) Prices Start at $980.00 ea. 
Extend Telephone Link via Fiber
or Async RS-232
Async Baud Rate From 19.2Kbps
16 LEDs/4 DIP Switches for Diagnostics
PBX and Key System Compatible, FXO/FXS Selectable
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
Built-In Dry Contact Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC, or 115/230VAC with Power Adapter
Applications
The TC1900/1901 is often used to extend telephone service in campus
networks, power plants, substations, etc or use an existing service
data channel to set up a telephone link. It is also used to set
up "Hot Links" telephone service via existing RS-232 links
on satellite, fiber optic or microwave networks. Other applications
include using the inherent benefits of fiber optics to reduce noise/EMI
or maximize security/isolation.
Applications
The TC1900/1901 is often used to extend telephone service in campus
networks, power plants, substations, etc or use an existing service
data channel to set up a telephone link. It is also used to set
up "Hot Links" telephone service via existing RS-232 links
on satellite, fiber optic or microwave networks. Other applications
include using the inherent benefits of fiber optics to reduce noise/EMI
or maximize security/isolation.
Description
The
TC1900/1901 "Quick-Talk" Phone Extender can turn a fiber
optic network or RS-232 circuit into a voice network simply by plugging
a telephone set into an RJ-11 connector. It is compatible with most
PBXs or Key Systems.
Quick-Talk
is typically used to extend dial-up phone service to remote sites
over a fiber optic (TC1901) or RS-232 circuit (TC1900). For example,
a user can extend a secured phone link to a remote site via an existing
satellite or microwave RS-232 data connection. With the optional
fiber optic front end, Quick-Talk can extend a phone line up to
20 miles away.
Quick-Talk
provides 2-wire FXS (foreign exchange subscriber) on the telephone
side with ring down capability and FXO (foreign exchange office)
on the PBX side. When both sides are set to FXS, a "Hot Link"
can be established; when one side lifts up the handset, the other
side starts ringing.
Available
in standalone (TC1900S) or rackmount (TC1900R) versions, it is compatible
with all popular types and sizes of fiber optic cable. Diagnostic
aids include 16 diagnostic LEDs for indicating power, ring, FXS,
FXO, and audio activity. The TC1900R PC Card version fits into TCRM191
and TCRM195 rackmount card cages.
Quick-Talk
is available with RS-232 or optical interfaces. The optical interface
is available in multimode (850/1300nm) or single mode (1300/1550nm)
versions, with ST, FC or SC connectors. A local dry contact relay
is also provided for external alarm and ringer connection.
Power
is 12VDC or 115/230VAC with an external power cube. 24VDC is optional.
Power redundancy is standard. Electrical connectors are RJ-11 Female
for both the telephone set & RS-232 connections.
*For ordering purposes, the TC1900 is the RS-232 version. TC1901
is the fiber version.
Order Today-Call (866) FIBER-21
|
TC1910
Fiber Optic Telephone Extender--Prices Start at $995.00
.jpg)
|
TC1910
Fiber Optic Telephone Extender
Extends Telephone Link via 10 Base-T
Ethernet Connection
Connects to Full Duplex Devices: Switches, Routers, Bridges, Transceivers,
etc.
Automatic Power-Up, Recovery Connection
Web-Based Configuration Interface
PBX & Key System (POTS) Compatible, FXO/FXS
Voice Bandwidth from 300Hz to 3.4Khz for Toll Quality Sound
18 LEDs for Diagnostics & Status Monitoring
Built-in Dry Contact Relay for External Alarm and Ringer Connection
12VDC, Optional 24VDC or 115/230VAC with Power Adapter
Description
The TC1910 Ethernet Telephone Extender
enables telephone service over a LAN via 10Base-T Ethernet connections.
It has a built-in Codec that digitizes voice and converts to packets
for transmission between local and remote TC1910s with designated
IP addresses. It is compatible with PBX and Key Systems (POTS).
LAN connections can be made by most
types of Full Duplex Ethernet devices, including switches, routers,
bridges, transceivers, etc. A Web-based Configuration user interface
(most browsers including Microsoft Windows Explorer, etc.) is provided
to view network settings or change IP addresses from the factory
default.
Phone connection is automatic upon
power-up or when network interruption is restored. Depending on
network traffic, multiple pairs of TC1910s can be used to set up
individual point-to-point telephone links. A hardened temperature
version (-20° to 70°C), Model TC1910T, is available for
harsh environments.
The TC1910 provides Toll Quality
sound within voice bandwidths from 300Hz to 3.4KHz. Two types of
voice applications are supported: one, connecting to a PBX for outside
telephone service; two, setting up a "hot link" point-to-point
connection, e.g. between two work stations, within a LAN. Two-wire
FXS (foreign exchange subscriber) is provided on the telephone side
with ring down capability and FXO (foreign exchange office) on the
PBX side.
Eighteen LEDs for network status,
phone status, power and volume are provided to enhance status monitoring
and diagnostics. Dry contacts for external alarm and ringer are
standard.
The TC1910 is available in standalone
(TC1910S) or rackmount (TC1910R) versions. The rackmount versions
fit into TCRM191 or TCRM195 19" Rackmount Card Cages. Power
is 12VDC or 115/230VAC with an external power cube. 24VDC power
is optional. Power redundancy is standard. Phone connectors are
RJ-11 Female and 10Base-T connectors are RJ-45 Female
appdiagram.gif)
CALL
American Tech Supply Today at (866) FIBER-21
appdiagram.gif)
home
| cables | switches
| Contact Us our team
| locations
|
American
Owned and Operated
