Discontinued Products
Showing 6865–6888 of 10717 results
-
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1060BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1060BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1060BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1065BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1065BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1065BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1050BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1050BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1050BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1050BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1050BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1050BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1055BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1055BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1055BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1020BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1020BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1020BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1020BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1020BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1020BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1025BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1025BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1025BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (STA580) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: STA580 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (STC580) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: STC580 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1460C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1460C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1460C -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1460) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1460 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1465C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1465C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1465C -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (STA146) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: STA146 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (STC146) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: STC146 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1450C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1450C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1450C -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1450) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1450 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1455C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1455C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1455C -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1380C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1380C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1380C -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1380) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1380 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1385C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1385C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1385C -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1370C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1370C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1370C -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1370) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1370 -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1375C) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1375C) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1375C