Discontinued Products
Showing 7201–7224 of 10717 results
-
Discontinued Products
Hand Held Enclosures 1599 Series – (1599KSGYBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599KSGYBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599KSGY) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599KSGY -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599HSGYBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599HSGYBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599HSGY) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599HSGY -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599HD-BULK) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599HD-BULK -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599ESGYBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599ESGYBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599ESGY) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599ESGY -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599ED-BULK) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599ED-BULK -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599BSGYBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599BSGYBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599BSGY) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599BSGY -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599BD-BULK) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599BD-BULK -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599KGYBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599KGYBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599KBKBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599KBKBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599KGY) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599KGY -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599KBK) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599KBK -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599HGYBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599HGYBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599HBKBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599HBKBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599HGY) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599HGY -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599HBK) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599HBK -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599EGYBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599EGYBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599EBKBAT) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599EBKBAT -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599EGY) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599EGY -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599EBK) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100. - Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599EBK -
Discontinued Products
Hand Held Enclosures 1599 Series – (1599BGYBATCP) (DISCONTINUED)
Features:
- Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure.
- Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
- Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
- Recessed top for membrane display or pad.
- Lap joint construction provides protection against access of dust and splashing water.
- Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
- Designed to meet IP54.
- Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.
- If EMI/ RFI shielding is required, try 1599RFI series
Photo Features:
Accessories:
Screws:
-
50 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS50
100 pack of optional PC board screws (#4 x 1/4″ Self-Tapping), part number 1593ATS100 -
Replacement cover screws for flame retardant 1599B sizes:
100 pack of silver replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100
100 pack of black replacement cover screws (M3-0.5 x 18mm Flat Head), part number 1594MS100BK - Replacement cover screws for flame retardant 1599E, H, & K sizes:
100 pack of silver replacement cover screws (M3 – 0.5 x 12 mm) 1599HMS100 – (nickel plated) Package of 100 or 1599HMS100BK (black oxide) Package of 100.
- Replacement cover screws for economy versions:
1599B sizes: 100 pack of silver replacement cover screws (#4 x 3/4″ Self-Tapping), part number 1599BTS100
1599E, H, & K sizes: 100 pack of silver replacement cover screws (#4 x 5/8″ Self-Tapping), part number 1593MS100
Optional Battery Holders
- Designed for our battery door enclosure (part numbers ending in BAT).
- Includes all the parts required to install the battery or batteries.
- Includes the battery holder, wires and foam anti-rattle pad.
- Refer to “Battery Holder Compatibility” table below.
Optional Battery Dividers:
- Grey ABS plastic panel barriers.
- Insert vertically into the P.C. card guides.
- Sold individually.
- Refer to “Enclosures” table below for compatibility.
Optional Belt Clip
Black 1599CLIP
Gray: 1599CLIPGY
- Molded from tough nylon (choice of Black or Grey).
- Includes 2 nylon screws (insulated to avoid internal interference).
- Mounting template included.
- Part numbers ending in “CP” come with these clips installed. All other 1599 enclosures are compatible.
SKU: 1599BGYBATCP