Discontinued Products
Showing 8185–8208 of 10717 results
-
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552C3GY) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552C3GY -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552D1GY) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552D1GY -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552C1GY) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552C1GY -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552DPLBK-10) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552DPLBK-10 -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552CPLBK-10) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552CPLBK-10 -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552DHBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552DHBK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552CHBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552CHBK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552DPGKITBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552DPGKITBK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552CPGKITBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552CPGKITBK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552D5BK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552D5BK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552C5BK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552C5BK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552D3BK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552D3BK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552C3BK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552C3BK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552D1BK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552D1BK -
Discontinued Products
Hand-Held ABS Plastic Enclosures 1552 Series – (1552C1BK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand. Also suitable for desktop use.
- End panels are removable for easy modification, or can be replaced with specially designed rubberized cord grips.
- Recessed top for membrane display or keypad.
- Lap joint construction provides protection against dust accumulation and splashing water. Designed to meet IP54 requirements.
- Molded in a choice of black or gray flame retardant ABS plastic with a satin texture.
- Unit is secured with (4) self tapping screws. Except for sizes C1 and D1, snap closures are present near the middle of the enclosure wall for added sturdiness.
- Black enclosures come with black screws, gray enclosures come with nickel plated screws.
- Rubberized cord grips and wall-mount holder accessories are available (sold separately).
Specifications:
- Enclosures and wall mount holder accessories are molded from flame retardant ABS plastic with a rating of UL94-V0.
- Cable gland end panel is made from flexible TPE and hard polycarbonate , both rated UL94-V0
- Cable tie-down accessories are molded from polycarbonate (UL94-V0).
Photo Features:
Optional Accessores
Cord grip end panel kit is made from TPE and polycarbonate. It replaces the standard end panel and fits securely into the enclosure. Compatible with wire diameters from 2mm to 6mm.
Cable secured inside the case with a cable tie-down and screws (included in cable gland kit).Plastic wall holder accessory (sold separately) allows the enclosure to be temporarily fixed to a wall. Wall mounting holes are countersunk for flat head screws. Mounting hardware is not included and should be user-specified depending on the application.
SKU: 1552C1BK -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP13GY) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP13GY) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP13GY -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP13BK) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP13BK) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP13BK -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP12GY) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP12GY) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP12GY -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP12BK) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP12BK) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP12BK -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP11GY) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP11GY) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP11GY -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP11BK) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP11BK) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP11BK -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP4GY) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP4GY) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP4GY -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP4BK) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP4BK) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP4BK -
Discontinued Products
ABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP3GY) (DISCONTINUED)
Discontinued ProductsABS Plastic Miniature Enclosures Snap-fit, wall-mount. 1551SNAP Series – (1551SNAP3GY) (DISCONTINUED)
Key Features:
- Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications.
- Choice of vented or unvented.
- Vented versions protect electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors).
- Ideally suited for mounting of printed circuit boards.
- Slots on the base of the enclosure allow for easy wall-mounting.
- Knockout on the base can be removed with a screwdriver and used for wire entry.
- Molded in ABS plastic (material has a UL94-HB rating).
- Choice of (4) square/ rectangle sizes and (3) circle sizes. Stocked in black, grey, and white.
- Satin texture finish.
- Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required.
- (4) P.C. board standoffs molded into interior (see drawings for details).
- Designed to meet IP30.
Notes:
- To secure P.C. board use self tapping #2 x 3/16″ screws (Qty 100 – Part number 1553WTS100) – not included with enclosure.
Photo Features:
Videos
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Square and Rectangle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Length Width Depth 1551V1BK 1551SNAP1BK Black 40 40 20 1551V1GY 1551SNAP1GY Grey 40 40 20 1551V1WH 1551SNAP1WH White 40 40 20 1551V2BK 1551SNAP2BK Black 80 40 20 1551V2GY 1551SNAP2GY Grey 80 40 20 1551V2WH 1551SNAP2WH White 80 40 20 1551V3BK 1551SNAP3BK Black 60 60 20 1551V3GY 1551SNAP3GY Grey 60 60 20 1551V3WH 1551SNAP3WH White 60 60 20 1551V4BK 1551SNAP4BK Black 80 80 20 1551V4GY 1551SNAP4GY Grey 80 80 20 1551V4WH 1551SNAP4WH White 80 80 20 Circle Enclosures
Units shown: mm. Switch units to: inch
Vented Unvented Color Diameter Depth 1551V11BK 1551SNAP11BK Black 45 20 1551V11GY 1551SNAP11GY Grey 45 20 1551V11WH 1551SNAP11WH White 45 20 1551V12BK 1551SNAP12BK Black 60 20 1551V12GY 1551SNAP12GY Grey 60 20 1551V12WH 1551SNAP12WH White 60 20 1551V13BK 1551SNAP13BK Black 80 20 1551V13GY 1551SNAP13GY Grey 80 20 1551V13WH 1551SNAP13WH White 80 20 SKU: 1551SNAP3GY