Discontinued Products
Showing 9145–9168 of 10717 results
-
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z109BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z109BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z109BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z109) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z109) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z109 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z115BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z115BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z115BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z115) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z115) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z115 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z108BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z108BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z108BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z108) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z108) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z108 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z107BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z107BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z107BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z107) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z107) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z107 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z137BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z137BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z137BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z137) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z137) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z137 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z113BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z113BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z113BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z113) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z113) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z113 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z111BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z111BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z111BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z111) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z111) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z111 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z106BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z106BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z106BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z106) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z106) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z106 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z103BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z103BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z103BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z103) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z103) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z103 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z102BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z102BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z102BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z102) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z102) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z102 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z104BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z104BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z104BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z104) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z104) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z104 -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z101BK) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z101BK) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z101BK -
Discontinued Products
Watertight Diecast Aluminum Enclosures 1550Z Series – (1550Z101) (DISCONTINUED)
Discontinued ProductsWatertight Diecast Aluminum Enclosures 1550Z Series – (1550Z101) (DISCONTINUED)
Key Features:
- Very economical – thick wall – diecast aluminum – watertight electronic instrument enclosure.
- Rugged, diecast aluminum alloy (tough – yet easy to machine),
- Two piece “tongue & groove” construction for protection against access of dust and water.
- Ideal for repetitive opening and closing.
- Easy to wall mount using “through box – blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out).
- Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws – into factory tapped holes.
- Lid screws are outside the gasket protection area to eliminate the need for “O” rings on the screws.
- On six sizes (the 1550Z107, 1550Z108, 1550Z116, 1550Z117, 1550Z137 & 1550Z139) lid screws are self captivating. The lid holes are slightly undersized & threaded with the first installation of the self tapping – lid screws (see photos)). Enclosure holes are pre-tapped.
- Designed to meet IP66 (NEMA 1, 4, 4X, 12 & 13 ratings. Gasket is pre-formed, one-piece silicone rubber and installs easily into lid groove.
- Gasket has a temperature rating of -40C to +150C
- North American Mark of Safety – cUL & UL listed. Certified to NEMA 4X standards – File #E71073
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
Accessories
SKU: 1550Z101