Discontinued Products
Showing 9241–9264 of 10717 results
-
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550K) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550K -
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550M) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550M -
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550C) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550C -
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550D) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550D -
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550B) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550B -
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550A) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550A -
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550P) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550P -
Discontinued Products
Diecast Aluminum Enclosures 1550 Series – (1550Q) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Available in natural vibra finish OR in light textured, black powder paint.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
- Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed.
- M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes.
- Designed to meet IP 54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available.
- All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262
- No internal ribs for easy installation of connectors without interference or additional milling.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Add 0.16″ (4 mm) to enclosure depth for lid
Replacement Hardware
- Replacement screws for the unpainted series – 1550MS100 – Package of 100
- Replacement screws for the black series – 1550MS100BK – Package of 100
Upgrade To Tamper-Resistant (Torx With Pin) Hardware
- Tamper-resistant screws for the unpainted series – 1550MS50T– Package of 50
- Tamper-resistant screws for the black series –1550MS50TBK – Package of 50
- Driver bit for tamper-proof screws – SCDRIVET15-2
Accessory Gasket Kits
- IP66
- Each kit includes two pre-formed economical EVA foam gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later
- Gasket is applied to the lid (see photo example below).
- Designed to meet IP 66 (with properly installed gasket and lid screws torqued at 55 cN.m).
- EVA Foam gasket rated up to 65 degrees C.
- IP67 Upgrade
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid (see photo example below).
- Tested to meet IP 67 (with properly installed gasket and lid screws torqued at 55 cN.m).
- Silicone gasket has a temperature rating of -40C to +150C
Photo Features (click to enlarge):
SKU: 1550Q -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPITCLR) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPITCLR) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPITCLR -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPITBK) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPITBK) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPITBK -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPITBU) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPITBU) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPITBU -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPIGY) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPIGY) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPIGY -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPICLR) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPICLR) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPICLR -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPIBK) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPIBK) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPIBK -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3TBU) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3TBU) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPI3TBU -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3GY) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3GY) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPI3GY -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3CLR) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3CLR) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPI3CLR -
Discontinued Products
Products For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3BK) (DISCONTINUED)
Discontinued ProductsProducts For Raspberry Pi Raspberry Pi A+, B, B+, Raspberry Pi 2 Model B, Raspberry Pi 3 Model B – (1593HAMPI3BK) (DISCONTINUED)
Enclosures Designed For Raspberry Pi
- Molded in a choice of general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models feature either dual camera mounts (inside or outside) OR a touch screen mount.
- Enclosure top and bottom halves snap together.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Development boards, cameras, and touch screens are NOT included.
Features Include Wall Mounting Tabs & Dual Camera Mounts
Videos
SKU: 1593HAMPI3BK -
Discontinued Products
Products Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBOGRTBU) (DISCONTINUED)
Discontinued ProductsProducts Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBOGRTBU) (DISCONTINUED)
Features:
- Molded in a general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models available for Beaglebone white, black, and green.
- Enclosure is secured with self tapping screws.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Beaglebone boards are not included
Notes:
- These enclosures are available without cutouts in our 1593 series (1593BB)
SKU: 1593HAMBOGRTBU -
Discontinued Products
Products Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBOGRGY) (DISCONTINUED)
Discontinued ProductsProducts Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBOGRGY) (DISCONTINUED)
Features:
- Molded in a general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models available for Beaglebone white, black, and green.
- Enclosure is secured with self tapping screws.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Beaglebone boards are not included
Notes:
- These enclosures are available without cutouts in our 1593 series (1593BB)
SKU: 1593HAMBOGRGY -
Discontinued Products
Products Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBOGRBK) (DISCONTINUED)
Discontinued ProductsProducts Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBOGRBK) (DISCONTINUED)
Features:
- Molded in a general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models available for Beaglebone white, black, and green.
- Enclosure is secured with self tapping screws.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Beaglebone boards are not included
Notes:
- These enclosures are available without cutouts in our 1593 series (1593BB)
SKU: 1593HAMBOGRBK -
Discontinued Products
Products Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBONETBU) (DISCONTINUED)
Discontinued ProductsProducts Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBONETBU) (DISCONTINUED)
Features:
- Molded in a general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models available for Beaglebone white, black, and green.
- Enclosure is secured with self tapping screws.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Beaglebone boards are not included
Notes:
- These enclosures are available without cutouts in our 1593 series (1593BB)
SKU: 1593HAMBONETBU -
Discontinued Products
Products Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBONEGY) (DISCONTINUED)
Discontinued ProductsProducts Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBONEGY) (DISCONTINUED)
Features:
- Molded in a general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models available for Beaglebone white, black, and green.
- Enclosure is secured with self tapping screws.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Beaglebone boards are not included
Notes:
- These enclosures are available without cutouts in our 1593 series (1593BB)
SKU: 1593HAMBONEGY -
Discontinued Products
Products Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBONEBK) (DISCONTINUED)
Discontinued ProductsProducts Designed for Beaglebone Beaglebone White, Black & Green – (1593HAMBONEBK) (DISCONTINUED)
Features:
- Molded in a general purpose ABS plastic with a satin texture.
- Enclosure designed to allow access to I/O connectors & often used controls and/or LEDS
- Models available for Beaglebone white, black, and green.
- Enclosure is secured with self tapping screws.
- Includes four (4) self adhesive rubber feet & instruction sheet.
- Beaglebone boards are not included
Notes:
- These enclosures are available without cutouts in our 1593 series (1593BB)
SKU: 1593HAMBONEBK