Discontinued Products
Showing 9769–9792 of 10717 results
-
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC236) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC236 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC224) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC224 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC212) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC212 -
Discontinued Products
Type 1 Gutter Trough CGT Series – (CGT3644) (DISCONTINUED)
Application
- Designed for use as a junction or pull box.
Standards
- UL870 Type 1
- cUL Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge steel
- Mounting holes on back of enclosure
- Flat cover is secured with screws
- Two grounding point embosses on enclosure body
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H D L CGT1244 4.00 4.00 12.00 CGT1266 6.00 6.00 12.00 CGT1844 4.00 4.00 18.00 CGT1866 6.00 6.00 18.00 CGT2444 4.00 4.00 24.00 CGT2466 6.00 6.00 24.00 CGT3644 4.00 4.00 36.00 CGT3666 6.00 6.00 36.00 CGT4844 4.00 4.00 48.00 CGT4866 6.00 6.00 48.00 SKU: CGT3644 -
Discontinued Products
Type 1 Gutter Trough CGT Series – (CGT2466) (DISCONTINUED)
Application
- Designed for use as a junction or pull box.
Standards
- UL870 Type 1
- cUL Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge steel
- Mounting holes on back of enclosure
- Flat cover is secured with screws
- Two grounding point embosses on enclosure body
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H D L CGT1244 4.00 4.00 12.00 CGT1266 6.00 6.00 12.00 CGT1844 4.00 4.00 18.00 CGT1866 6.00 6.00 18.00 CGT2444 4.00 4.00 24.00 CGT2466 6.00 6.00 24.00 CGT3644 4.00 4.00 36.00 CGT3666 6.00 6.00 36.00 CGT4844 4.00 4.00 48.00 CGT4866 6.00 6.00 48.00 SKU: CGT2466 -
Discontinued Products
Type 1 Gutter Trough CGT Series – (CGT2444) (DISCONTINUED)
Application
- Designed for use as a junction or pull box.
Standards
- UL870 Type 1
- cUL Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge steel
- Mounting holes on back of enclosure
- Flat cover is secured with screws
- Two grounding point embosses on enclosure body
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H D L CGT1244 4.00 4.00 12.00 CGT1266 6.00 6.00 12.00 CGT1844 4.00 4.00 18.00 CGT1866 6.00 6.00 18.00 CGT2444 4.00 4.00 24.00 CGT2466 6.00 6.00 24.00 CGT3644 4.00 4.00 36.00 CGT3666 6.00 6.00 36.00 CGT4844 4.00 4.00 48.00 CGT4866 6.00 6.00 48.00 SKU: CGT2444 -
Discontinued Products
Type 1 Gutter Trough CGT Series – (CGT1866) (DISCONTINUED)
Application
- Designed for use as a junction or pull box.
Standards
- UL870 Type 1
- cUL Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge steel
- Mounting holes on back of enclosure
- Flat cover is secured with screws
- Two grounding point embosses on enclosure body
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H D L CGT1244 4.00 4.00 12.00 CGT1266 6.00 6.00 12.00 CGT1844 4.00 4.00 18.00 CGT1866 6.00 6.00 18.00 CGT2444 4.00 4.00 24.00 CGT2466 6.00 6.00 24.00 CGT3644 4.00 4.00 36.00 CGT3666 6.00 6.00 36.00 CGT4844 4.00 4.00 48.00 CGT4866 6.00 6.00 48.00 SKU: CGT1866 -
Discontinued Products
Type 1 Gutter Trough CGT Series – (CGT1844) (DISCONTINUED)
Application
- Designed for use as a junction or pull box.
Standards
- UL870 Type 1
- cUL Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge steel
- Mounting holes on back of enclosure
- Flat cover is secured with screws
- Two grounding point embosses on enclosure body
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H D L CGT1244 4.00 4.00 12.00 CGT1266 6.00 6.00 12.00 CGT1844 4.00 4.00 18.00 CGT1866 6.00 6.00 18.00 CGT2444 4.00 4.00 24.00 CGT2466 6.00 6.00 24.00 CGT3644 4.00 4.00 36.00 CGT3666 6.00 6.00 36.00 CGT4844 4.00 4.00 48.00 CGT4866 6.00 6.00 48.00 SKU: CGT1844 -
Discontinued Products
Type 1 Gutter Trough CGT Series – (CGT1266) (DISCONTINUED)
Application
- Designed for use as a junction or pull box.
Standards
- UL870 Type 1
- cUL Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge steel
- Mounting holes on back of enclosure
- Flat cover is secured with screws
- Two grounding point embosses on enclosure body
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H D L CGT1244 4.00 4.00 12.00 CGT1266 6.00 6.00 12.00 CGT1844 4.00 4.00 18.00 CGT1866 6.00 6.00 18.00 CGT2444 4.00 4.00 24.00 CGT2466 6.00 6.00 24.00 CGT3644 4.00 4.00 36.00 CGT3666 6.00 6.00 36.00 CGT4844 4.00 4.00 48.00 CGT4866 6.00 6.00 48.00 SKU: CGT1266 -
Discontinued Products
Type 1 Gutter Trough CGT Series – (CGT1244) (DISCONTINUED)
Application
- Designed for use as a junction or pull box.
Standards
- UL870 Type 1
- cUL Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge steel
- Mounting holes on back of enclosure
- Flat cover is secured with screws
- Two grounding point embosses on enclosure body
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H D L CGT1244 4.00 4.00 12.00 CGT1266 6.00 6.00 12.00 CGT1844 4.00 4.00 18.00 CGT1866 6.00 6.00 18.00 CGT2444 4.00 4.00 24.00 CGT2466 6.00 6.00 24.00 CGT3644 4.00 4.00 36.00 CGT3666 6.00 6.00 36.00 CGT4844 4.00 4.00 48.00 CGT4866 6.00 6.00 48.00 SKU: CGT1244 -
Discontinued Products
Type 3R Wiring Trough C3RWT Series – (C3RWT612) (DISCONTINUED)
Application
- Designed for use to protect multiple wiring junctions in outdoor environments against the ingress of rain, sleet, snow and the external formation of ice.
Standards
- UL870 Type 3R
- CSA Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Formed and spot welded from 14 or 16 gauge galvanized steel
- Drip shield top design protects the enclosure against rain, snow or sleet
- Embossed mounting holes on back of enclosure
- Slip on removable front cover is secured with screws
- Padlocking hasp
- To fully comply with UL870 – 2008 requirements a bonding stud is provided on the cover and a ground stud is provided in the enclosure
- A #10 AWG – 12″ grounding strap with crimped on ring terminals is also provided to comply with UL requirements
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
SKU: C3RWT612 -
Discontinued Products
Type 3R Wiring Trough C3RWT Series – (C3RWT424) (DISCONTINUED)
Application
- Designed for use to protect multiple wiring junctions in outdoor environments against the ingress of rain, sleet, snow and the external formation of ice.
Standards
- UL870 Type 3R
- CSA Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Formed and spot welded from 14 or 16 gauge galvanized steel
- Drip shield top design protects the enclosure against rain, snow or sleet
- Embossed mounting holes on back of enclosure
- Slip on removable front cover is secured with screws
- Padlocking hasp
- To fully comply with UL870 – 2008 requirements a bonding stud is provided on the cover and a ground stud is provided in the enclosure
- A #10 AWG – 12″ grounding strap with crimped on ring terminals is also provided to comply with UL requirements
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
SKU: C3RWT424 -
Discontinued Products
Type 3R Wiring Trough C3RWT Series – (C3RWT418) (DISCONTINUED)
Application
- Designed for use to protect multiple wiring junctions in outdoor environments against the ingress of rain, sleet, snow and the external formation of ice.
Standards
- UL870 Type 3R
- CSA Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Formed and spot welded from 14 or 16 gauge galvanized steel
- Drip shield top design protects the enclosure against rain, snow or sleet
- Embossed mounting holes on back of enclosure
- Slip on removable front cover is secured with screws
- Padlocking hasp
- To fully comply with UL870 – 2008 requirements a bonding stud is provided on the cover and a ground stud is provided in the enclosure
- A #10 AWG – 12″ grounding strap with crimped on ring terminals is also provided to comply with UL requirements
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
SKU: C3RWT418 -
Discontinued Products
Type 3R Wiring Trough C3RWT Series – (C3RWT412) (DISCONTINUED)
Application
- Designed for use to protect multiple wiring junctions in outdoor environments against the ingress of rain, sleet, snow and the external formation of ice.
Standards
- UL870 Type 3R
- CSA Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Formed and spot welded from 14 or 16 gauge galvanized steel
- Drip shield top design protects the enclosure against rain, snow or sleet
- Embossed mounting holes on back of enclosure
- Slip on removable front cover is secured with screws
- Padlocking hasp
- To fully comply with UL870 – 2008 requirements a bonding stud is provided on the cover and a ground stud is provided in the enclosure
- A #10 AWG – 12″ grounding strap with crimped on ring terminals is also provided to comply with UL requirements
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
SKU: C3RWT412 -
Discontinued Products
Type 4X Pull Through Wireway 1487SS Series – (1487ESSS) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 4, 4X and 12
- IEC 60529, IP66
Construction
- Bodies and covers are formed from 14 gauge 304 stainless steel with 10 gauge flanges.
- Continuous flange around wireway ends, requires cables to be pulled through.
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are natural stainless steel with a smooth brushed finish.
Accessories
SKU: 1487ESSS -
Discontinued Products
Type 4X Pull Through Wireway 1487SS Series – (1487DSSS) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 4, 4X and 12
- IEC 60529, IP66
Construction
- Bodies and covers are formed from 14 gauge 304 stainless steel with 10 gauge flanges.
- Continuous flange around wireway ends, requires cables to be pulled through.
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are natural stainless steel with a smooth brushed finish.
Accessories
SKU: 1487DSSS -
Discontinued Products
Type 4X Pull Through Wireway 1487SS Series – (1487CSSS) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 4, 4X and 12
- IEC 60529, IP66
Construction
- Bodies and covers are formed from 14 gauge 304 stainless steel with 10 gauge flanges.
- Continuous flange around wireway ends, requires cables to be pulled through.
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are natural stainless steel with a smooth brushed finish.
Accessories
SKU: 1487CSSS -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487ES) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487ES -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487DS) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487DS -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487CS) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487CS -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487EH) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487EH -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487DH) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487DH -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487CH) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487CH